ignition Citroen C4 PICASSO 2008 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008, Model line: C4 PICASSO, Model: Citroen C4 PICASSO 2008 1.GPages: 266, PDF Size: 7.14 MB
Page 2 of 266
A
B
C
D
B
A
IN BRIEF
I
5
O P E N I N G
Remote control key
A. Central locking
B. Unlocking
C. Guide-me-home lighting
D. Key release/storage
Fuel tank (60 litres)
Press on control A located on the control panel to the left of the d a s h b o a r d . T h e f u e l fl a p a u t o m a t i -cally opens up fully.
Insert the nozzle so as to push in the metallic gate valve B.
P u s h t h e f u e l fl a p t o r e c l o s e i t .
After switching off the ignition, control A is only active for a few Aminutes. If necessary, switch on the ignition again to reactivate it.
Bonnet stay : detach the stay and pivot it upwards to insert it into the notch.
To close : move the stay back to its initial position, lower the bonnet until it is horizontal, then allow it to slam shut.
Bonnet opening/closing
To unlock, pull the control locat-ed under the dashboard towards you.
Opening
Using the multifunction screen, you can choose from the following options when opening your vehi-cle with the remote control :
- either all of the doors and the tailgate,
- o r t h e d r i v e r ’ s d o o r w i t h a fi r s t press, then all of the other doors with a second press.
Page 9 of 266
1
23
IN BRIEF
I
12
G E T T I N G S T A R T E DF r o n t s e a t s
Head restraint
Backrest angle
Seat height adjustment
Lumbar support
Longitudinal adjustment
Armrest
Manual adjustments
Electric adjustments :
Adjustment of seat height and angle, longitudinal adjustment
Adjustment of backrest angle and lumbar support
Driver : memorisation of driving positions
Note : The seats can also be ad-justed on a temporary basis :
- on opening one of the front doors,
- after switching on the ignition.
Heated seat control (located on the inside of the front seats)
Page 10 of 266
A
1
2
1
2
IN BRIEF
I
13
G E T T I N G S T A R T E D
Adjusting the steering wheel
The steering wheel can be adjusted in terms of height and reach.
Unlock the steering wheel by pull-ing control A towards you.
Adjust the position of the steer-ing wheel then lock it pushing the control back fully.
Automatic photochromic interior rear view mirror
T h i s m o d i fi e s i t s r o l e a u t o m a t i c a l l y and progressively between day use and night use.
It can be deactivated using control 1.
Child mirror (2)
This allows you to monitor the rear passengers. It can be folded away to eliminate dazzle.
Rear view mirrors adjustment
This operates with the ignition switched on.
From the driver’s seat, select the rear view mirror by moving control 1 to the left or right, then adjust t h e r e a r v i e w m i r r o r a s r e q u i r e d i n the 4 directions using control 2.
Demisting-deicing of the rear view mirrors is linked to that of the rear screen.
Rear view mirrors foldback
When the vehicle is parked, the rear view mirrors can be folded back either manually or automati-cally.For safety reasons, these ad-justments must not be carried out whilst driving.
Page 13 of 266
+–
IN BRIEF
I
16
D R I V I N G
(6-Speed) electronic gearbox system
R Reverse
N Neutral
A Automatic mode
M Manual mode
Using control levers + and - :
- Gear changing in manual mode
- Temporary manual operation in automatic mode.
To start
(6-Speed) electronic gearbox system
- Check that you are in neutral (position N).
- P r e s s fi r m l y o n t h e b r a k e p e d a l and turn the ignition key.
Position Position
Automatic gearbox
P Park
R Reverse
N Neutral
D Automatic mode
M S e q u e n t i a l m o d e
Using control levers + and - :
- G e a r c h a n g i n g i n s e q u e n t i a l m o d e
- Temporary manual operation in automatic mode.
To start
Automatic gearbox
- Check that you are in position Por N and turn the ignition key.
Note : To exit position P, press on the brake pedal before moving the selector.
ControlControl
Position selector
Page 14 of 266
A
A
IN BRIEF
I
17
D R I V I N G
Electronic parking brake
This device combines :
- automatic functions :
Automatic application when the engine stops and automatic re-lease on use of the accelerator (automatic operation by default) ;
- manual use :
Permanent manual application / release of parking brake is pos-sible by pulling control A.
Navidrive Multifunction display
Before leaving the vehicle, check that the electronic parking brake warning lamp P (red) is perma-nently on.If you leave the vehicle with the engine running, manually apply the parking brake.Never leave a child alone inside the vehicle with the ignition on, as they could release the park-ing brake.
Parking space sensor
You can select the “parking space sen-sor” function by pressing on button A. Once the space has been measured, the function displays the following messages :
Warning lamps displaylamps displayWarning lamps displayps disInstrument panelpanelpanel
Multifunction display
Instrument panel
Parking possible
P a r k i n g d i f fi c u l t
Parking not advised
Hill start assist
To aid starting on a gradient, your v e h i c l e i s e q u i p p e d w i t h a s y s t e m which keeps it immobilised for about 2 seconds, the approximate time it takes to move your foot from the brake pedal to the accel-erator pedal.
Page 21 of 266
24
II
Electronic immobiliser key
T h e k e y l o c k s a n d u n l o c k s a l l t h e v e h i c l e ’ s d o o r s , a s w e l l a s s w i t c h -ing on the engine.
Note : T h e k e y c a n a l s o d e a c t i - v a t e t h e f r o n t p a s s e n g e r a i r b a g ( s e e « A i r b a g s » ) .
I t i s d a n g e r o u s t o o p - e r a t e t h e d e a d l o c k i n g w h e n s o m e o n e i s i n s i d e t h e v e h i c l e b e c a u s e i t i s i m p o s - s i b l e t o u n l o c k t h e v e h i c l e f r o m t h e i n s i d e ( w i t h o u t t h e r e m o t e c o n t r o l ) .
T h e n u m b e r o f t h e k e y i s o n t h e l a b e l s u p p l i e d w i t h t h e k e y .
I n t h e c a s e o f l o s s , o n l y a C I T R O Ë N d e a l e r c a n p r o v i d e I n t h e c a s e o f l o s s , o n l y a I n t h e c a s e o f l o s s , o n l y a
y o u w i t h n e w k e y s o r r e m o t e controls.
N e v e r a t t e m p t t o m o d i f y t h e e l e c t r o n i c i m m o b i l i s e r ’ s e l e c t r i - c a l c i r c u i t , a s t h a t c o u l d r e n d e r y o u r v e h i c l e u n d r i v e a b l e .
Central locking with the key
T u r n t h e k e y b r i e fl y i n t h e d o o r l o c k . T h e v e h i c l e i s l o c k e d .
Deadlocking : Central locking with the key
T u r n t h e k e y a s e c o n d t i m e i n t h e d o o r l o c k . T h e v e h i c l e i s d e a d - l o c k e d . I t i s t h e n i m p o s s i b l e t o o p e n t h e d o o r s f r o m t h e i n s i d e o r f r o m t h e o u t s i d e .
A l o n g a c t i o n w i t h t h e k e y c l o s e s t h e w i n d o w s .
Note : With the v e h i c l e s t a t i o n a r y a n d t h e e n g i n e s w i t c h e d o f f , l o c k - i n g i s s i g n a l l e d b y t h e fl a s h i n g o f t h e w a r n i n g l a m p o n t h e i n t e r i o r locking control.
I f a n y o f t h e d o o r s , o r t h e b o o t , i s o p e n o r n o t p r o p e r l y c l o s e d , a r e - b o u n d s o u n d s i g n a l s t o y o u t h a t i t i s i m p o s s i b l e t o l o c k t h e v e h i c l e .
K E Y S
A l l t h e v e h i c l e k e y s c o n t a i n a n e l e c t r o n i c i m m o b i l i s e r d e v i c e .
A f t e r y o u s w i t c h o n t h e i g n i t i o n , a d i a l o g u e i s e s t a b l i s h e d b e t w e e n t h e i g n i t i o n k e y a n d t h e e l e c t r o n i c i m - m o b i l i s e r d e v i c e .
If the key is not recognised, starting is impossible.
I f t h i s h a p p e n s , l e a v e y o u r v e - h i c l e i m m o b i l i s e d a n d c o n t a c t a C I T R O Ë N d e a l e r .
Electronic immobiliser
The ELECTRONIC IMMOBILISER l o c k s t h e v e h i c l e ’ s s u p p l y s y s t e m .
T h e s y s t e m a c t i v a t e s a u t o m a t i c a l l y w h e n t h e k e y i s r e m o v e d f r o m t h e ignition.
Page 22 of 266
AA
B
1
II
2 5
Y o u r v e h i c l e m a y b e e q u i p p e d w i t h a n A N T I - I N T R U S I O N A L A R M .
T h i s p r o v i d e s :
• E x t e r i o r p e r i m e t e r p r o t e c t i o n b y m e a n s o f d e t e c t o r s o n t h e v e h i - c l e a c c e s s p o i n t s ( d o o r s , b o o t , b o n n e t ) a s w e l l a s o n t h e e l e c t r i - c a l s u p p l y .
• I n t e r i o r v o l u m e t r i c p r o t e c t i o n b y m e a n s o f u l t r a s o n i c s e n s o r s ( d e t e c t i n g m o v e m e n t i n s i d e t h e p a s s e n g e r c o m p a r t m e n t ) . T h i s c a n b e d e a c t i v a t e d u s i n g t h e control 1.
T h e i n s t a l l a t i o n a l s o h a s a s i r e n , a n d a w a r n i n g l a m p o n t h e c o n t r o l 1 w h i c h i s v i s i b l e f r o m o u t s i d e t h e v e h i c l e , i n d i c a t i n g t h e t h r e e p o s - s i b l e s t a t u s e s o f t h e a l a r m :
• A l a r m n o t a c t i v e ( d i s a r m e d ) , w a r n i n g l a m p o f f .
• A l a r m a c t i v e ( a r m e d ) , t h e w a r n - i n g l a m p fl a s h e s s l o w l y .
• A l a r m t r i g g e r e d ( s i g n a l l i n g a n i n t r u s i o n ) , t h e w a r n i n g l a m p fl a s h e s r a p i d l y i f t h e a l a r m i s d i s - a r m e d b y a p r e s s o n t h e c o n t r o l B . I t s t o p s a s s o o n a s y o u s w i t c h on the ignition.
Note : I f t h e r e i s a m a l f u n c t i o n , t h e w a r n i n g l a m p r e m a i n s p e r m a -nently on.
DISARMING OF THE ALARM USING THE REMOTE CONTROL
T h e a l a r m i s d i s a r m e d w h e n y o u u n l o c k t h e v e h i c l e ( w i t h a p r e s s o n button B o n t h e r e m o t e c o n t r o l ) .
DISARMING OF THE ALARM WITH THE KEY
U n l o c k t h e d o o r s w i t h t h e k e y . The siren triggers. Enter the ve- h i c l e , i n s e r t t h e k e y i n t h e i g n i t i o n a n d t u r n i t t o t h e d r i v e p o s i t i o n t o s t o p t h e s i r e n . O t h e r w i s e t h e s i - r e n w i l l c o n t i n u e f o r a p p r o x i m a t e l y 3 0 s e c o n d s .
A N T I - I N T R U S I O N A L A R M
Page 23 of 266
II
A N T I - I N T R U S I O N A L A R M
OPERATION OF THE ALARM
First make sure all the doors are closed.
T h e a l a r m i s a r m e d b y p r e s s i n g b u t t o n A on the re- m o t e c o n t r o l .
W i t h t h e a l a r m a r m e d , t h e p r o t e c t i o n s a r e a c t i v e a f t e r 5 s e c o n d s ( p e r i m e t e r ) a n d 4 5 s e c o n d s ( v o l u m e t r i c ) .
W h e n t h e a l a r m i s a r m e d ( o n s t a n d b y ) , a n y i n t r u s i o n w i l l t r i g g e r t h e s i r e n f o r 3 0 s e c o n d s , a c c o m p a n i e d b y t h e d i r e c t i o n i n d i c a t o r s l i g h t i n g u p .
T h e a l a r m t h e n g o e s b a c k o n s t a n d b y , b u t t h e t r i g g e r - i n g r e m a i n s m e m o r i s e d a n d i s s i g n a l l e d b y t h e r a p i d fl a s h i n g o f t h e w a r n i n g l a m p o n c o n t r o l 1 a f t e r y o u h a v e d e a c t i v a t e d t h e a l a r m w i t h a p r e s s o n t h e u n -locking button B . T h e fl a s h i n g s t o p s w h e n y o u s w i t c h on the ignition.
T h e s i r e n i s a l s o t r i g g e r e d i f t h e r e i s a c u t t i n g o f t h e e l e c t r i c a l s u p p l y . T o s t o p i t , r e s t o r e t h e e l e c t r i c a l s u p -ply then press on the unlocking button B.
Note :
• I f y o u w a n t t o l o c k y o u r v e h i c l e w i t h o u t a r m i n g t h e a l a r m , j u s t l o c k w i t h t h e k e y o n l y .
• I f y o u t r y t o l o c k y o u r v e h i c l e b u t a d o o r , o r t h e b o o t , i s s t i l l o p e n , t h e c e n t r a l l o c k i n g d o e s n o t o p e r a t e b u t t h e a l a r m w i l l a r m i t s e l f a f t e r a p p r o x . 4 5 s e c o n d s . Y o u w i l l h e a r a r e b o u n d s o u n d c o m i n g f r o m t h e l o c k s .
Note : T h e s i r e n i s a u t o m a t i c a l l y d e a c t i v a t e d ( f o r e x - a m p l e f o r d i s c o n n e c t i n g t h e b a t t e r y ) a s s o o n a s t h e v e h i c l e i s u n l o c k e d u s i n g t h e r e m o t e c o n t r o l
Deactivation of the volumetric detection
Y o u c a n o p e r a t e t h e a l a r m w i t h p e r i m e t e r p r o t e c t i o n o n l y , b y d e a c t i v a t i n g t h e v o l u m e t r i c p r o t e c t i o n ( i f f o r e x a m p l e y o u w i s h t o l e a v e a n a n i m a l i n t h e v e h i c l e ) .
F o r t h i s , s w i t c h o f f t h e i g n i t i o n t h e n i m m e d i a t e l y p r e s s button 1 f o r a t l e a s t o n e s e c o n d .
T h e w a r n i n g l a m p o n b u t t o n 1 s h o u l d c o m e p e r m a n e n t - l y o n . I t w i l l s t a r t t o fl a s h w h e n t h e a l a r m i s a r m e d .
A r m t h e a l a r m b y l o c k i n g y o u r v e h i c l e w i t h t h e r e m o t e control.
I t i s r e c o m m e n d e d t o d i s a r m t h e v o l u m e t r i c d e t e c t i o n w h e n y o u u s e a n a u t o m a t i c c a r w a s h , t o p r e v e n t r a n - d o m t r i g g e r i n g o f t h e a l a r m .
Automatic activation (depending on country)
T h e a l a r m i s a r m e d a u t o m a t i c a l l y , 2 m i n u t e s a f t e r t h e l a s t d o o r , o r t h e b o o t , h a s b e e n c l o s e d .
I n o r d e r t o p r e v e n t t h e a l a r m f r o m t r i g g e r i n g w h e n y o u o p e n o n e o f t h e d o o r s o r t h e b o o t , i t i s e s s e n t i a l t o p r e s s the unlocking button B a g a i n o n t h e r e m o t e c o n t r o l .
Page 62 of 266
II
63
Park
Never select positions P or R if the vehicle is not stationary.
If, while the vehicle is moving, position N is engaged inadvertently, allow the engine to idle before engaging position D or M.
U s i n g t h e a u t o m a t i c g e a r b o x
This position of the selector is used to prevent the vehicle from moving when you are stationary.
- To select position P, move the selector back to the highest po- s i t i o n ( t o w a r d s R), then push it forwards and then to the left.
R e v e r s e g e a r
Neutral
S t a r t i n g t h e e n g i n e
1. To start the engine, the selector has to be in position P or N.
2. Action the starter.
3. When the engine is running, place the selector on R, D or M as required.
4. Check, in the instrument panel, the position engaged.
5. Release the brake pedal and accelerate.
Note :
- If the selector is not in position P, a message “place automatic gear-box in position P ” appears on the multifunction screen, accompa- n i e d b y a b e e p a n d t h e fl a s h i n g o f P in the instrument panel.
A U T O M A T I C G E A R B O XG E N E R A L
- To avoid incoherence between the position of the selector and the actual position of the gear-box, always exit from position Pwhen you switch on the ignition and press the brake pedal.
Otherwise, when the ignition is on or the engine is running :
1. Reposition the selector in position P,
2. Put your foot on the brake pedal and then select the gear you want.
- To exit position P, move the se-lector to the right and then to the position you want.
- Only engage this position when the vehicle is completely sta-tionary. In this position, the front wheels are locked. Make sure that the selector is correctly po-sitioned.
Only engage this position when the vehicle is stationary. To pre-vent snatching, do not accelerate too soon after selection.
Never select position N if the vehi-cle is moving.
Page 65 of 266
66
II A B S - A n t i - l o c k b r a k i n g s y s t e m
This system enhances your safety by preventing the wheels from locking under heavy braking or in conditions of poor road adherence.
It enables you to retain control of the steering.
The operating capacity of all the electrical components that are essential to the ABS system is checked by an electrical monitoring system before and during your journey. The ABS warning lamp comes on when you switch on the ignition and should go out after a few seconds.
If the warning lamp does not go out, this means that the ABS has discon-nected as a result of a malfunction. Also, if the warning la mp lights up dur-ing a journey, it means that the ABS system is inactive. In eith er case, the normal braking system remains fully effective, as on a non-ABS vehicle.
However, to restore the safety associated with the correct operat ion of the ABS, the vehicle should be examined as soon as possible by a CITR OËN However, to restore the safety associated with the correct operation of the operation of the
dealer.
O n s l i p p e r y s u r f a c e s ( g r a v e l , s n o w , i c e , e t c . ) , d r i v i n g c a r e f u l l y i s s t i l l e s -sential.
E m e r g e n c y b r a k i n g a s s i s t a n c e s y s t e m
In an emergency, this system enables you to achieve the optimum braking pressure more quickly, thereby reducing the stopping distance. It deploys according to the speed of your action on the brake pedal, reducing the resistance to that action.
To prolong the effect of the emergency braking assistance, simply keep your foot on the brake pedal.
B R A K E S
State of wear of brake pads, discs and drums
Brake pad wear varies according to the way you use your vehicle ( e . g . u r b a n d r i v i n g , f r e q u e n t s t o p s , your style of driving or the type of road).
For all information relating to the checking of the state of wear of brake discs and drums, contact a CITROËN dealer.brake discs and drums, brake discs
After washing, apply the brakes gradually to remove water from the brake linings.