lock Citroen C4 PICASSO 2008 1.G User Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008, Model line: C4 PICASSO, Model: Citroen C4 PICASSO 2008 1.GPages: 266, PDF Size: 7.14 MB
Page 64 of 266
–+II
65
T h e fl a s h i n g o f t h e w a r n i n g l a m p f o r t h e p o s i t i o n r e q u e
s t e d s i g n a l s t h a t t h i s p o s i t i o n i s n o t y e t o b t a i n e d . I f t h e w a r n i n g l a m p i s o n fi x e d , t h e p o s i t i o n i s c o n fi r m e d .Display of a dash in the rev counter indicates a malfunction. Urgently contact a CITROËN dealer. I f t h e w a r n i n g l a m p i s o n fi x e d , t h e p o s i t i o n i s c o n fi r m e d . I f t h e w a r n i n g l a m p i s o n fi x e d , t h e p o s i t i o n i s c o n fi r m e d .
Lighting of the SERVICE warning lamp accompanied by a message an d a sound signal indicates a functioning anomaly. In this case :
- a marked snatching may be felt when selecting R for reverse gear,- the gearbox is locked on a gear, - d o n o t e x c e e d 1 0 0 k m / h ( a p p r o x . 6 0 m p h ) .
Urgently contact a CITROËN dealer.
Sequential mode w i t h m a n u a l g e a r c h a n g i n g
Position of the selector for manual gear changing.
- Move the selector to position M.
- Pull the lever “ + ” to change up a gear.
- Pull the lever “ - ” to change down a gear.
A U T O M A T I C G E A R B O X S E Q U E N T I A L M O D E
Observations :
- If the vehicle stops or reduces s p e e d ( f o r e x a m p l e w h e n a p -proaching a stop sign), the gear-box changes down automatically t o fi r s t g e a r .
- In sequential mode, it is not necessary to release the accel-erator during gear changes.
- A request to change gear is ac-cepted only if the engine speed permits it.- For safety reasons, depending on the engine speed, a change up or down may be performed automatically.
- It is possible at any time to move from position D ( d r i v i n g i n a u t o -matic mode) to position M ( d r i v -ing in sequential mode) or vice versa.
Page 65 of 266
66
II A B S - A n t i - l o c k b r a k i n g s y s t e m
This system enhances your safety by preventing the wheels from locking under heavy braking or in conditions of poor road adherence.
It enables you to retain control of the steering.
The operating capacity of all the electrical components that are essential to the ABS system is checked by an electrical monitoring system before and during your journey. The ABS warning lamp comes on when you switch on the ignition and should go out after a few seconds.
If the warning lamp does not go out, this means that the ABS has discon-nected as a result of a malfunction. Also, if the warning la mp lights up dur-ing a journey, it means that the ABS system is inactive. In eith er case, the normal braking system remains fully effective, as on a non-ABS vehicle.
However, to restore the safety associated with the correct operat ion of the ABS, the vehicle should be examined as soon as possible by a CITR OËN However, to restore the safety associated with the correct operation of the operation of the
dealer.
O n s l i p p e r y s u r f a c e s ( g r a v e l , s n o w , i c e , e t c . ) , d r i v i n g c a r e f u l l y i s s t i l l e s -sential.
E m e r g e n c y b r a k i n g a s s i s t a n c e s y s t e m
In an emergency, this system enables you to achieve the optimum braking pressure more quickly, thereby reducing the stopping distance. It deploys according to the speed of your action on the brake pedal, reducing the resistance to that action.
To prolong the effect of the emergency braking assistance, simply keep your foot on the brake pedal.
B R A K E S
State of wear of brake pads, discs and drums
Brake pad wear varies according to the way you use your vehicle ( e . g . u r b a n d r i v i n g , f r e q u e n t s t o p s , your style of driving or the type of road).
For all information relating to the checking of the state of wear of brake discs and drums, contact a CITROËN dealer.brake discs and drums, brake discs
After washing, apply the brakes gradually to remove water from the brake linings.
Page 68 of 266
II
69
To immobilise the vehicle
With the vehicle stationary, to apply the parking brake whether the engine is running or off, pull on control A.
The application of the park- i n g b r a k e i s c o n fi r m e d b y :
- the lighting of the warning lamp on control A and of warning lamp P on the instrument panel,
- the display of a message “park-ing brake applied” on the multi-function display.
When the driver’s door is opened with the engine running, a beep is heard and a message displayed if the parking brake has not been applied.
MAXIMUM APPLICATION
If necessary, you can utilise m a x i -mum application of the parking brake. It is obtained by means of a l o n g p u l l on control A, until you see the message “parking brake applied” and a beep is heard.
M a x i m u m a p p l i c a t i o n i s indispensable :
- in the case of a vehicle towing a caravan or a trailer, if the au-tomatic functions are activated but you are applying the parking brake manually,
- when the gradient you are parked o n i s v a r i a b l e i n i t s e f f e c t ( e . g . o n a ferry, in a lorry, during towing).
Note :
- In the case of towing, a loaded vehicle or parking on a gradient, turn the front wheels towards the pavement and engage a gear when you park.
- After a maximum application, the release time will be longer.
PARTICULAR SITUATIONS
I n c e r t a i n s i t u a t i o n s ( s t a r t i n g t h e engine ...), the parking brake can automatically alter its force. This is normal operation.
To advance your vehicle a few centimetres without starting the engine, but with the ignition on, press on the brake pedal and re-lease the parking brake by pull- i n g then r e l e a s i n g control A. The full release of the parking brake i s c o n fi r m e d b y t h e e x t i n c t i o n o f warning lamp P ( r e d ) o n t h e i n s t r u -ment panel and the display of a message “parking brake released” on the multifunction display.
If the parking brake malfunctionswhile applied or if the battery r u n s fl a t , a n e m e r g e n c y r e l e a s e i s a l w a y s p o s s i b l e ( s e e p a r a g r a p h “Emergency unlocking”).
E L E C T R O N I C P A R K I N G B R A K E
Page 70 of 266
B
C
DII
71
EMERGENCY UNLOCKING
In the event of the electronic parking brake malfunctioning o
r the battery running fl a t , a n e m e r g e n c y m a n u a l d e v i c e c a n u n l o c k t h e p a r k i n g b r a k e .
1. I m m o b i l i s e t h e v e h i c l e , w i t h t h e e n g i n e r u n n i n g , b y e n g a g i n g fi r s t g e a r ( m a n -ual gearbox), position P ( a u t o m a t i c g e a r b o x ) o r M or R ( 6 - s p e e d e l e c t r o n i c gearbox), then switch off the engine.
Note : if it is impossible to immobilise the vehicle, do not action the control and urgently contact a CITROËN dealer. if it is impossible to immobilise impossible to immobilise
2. F e t c h t h e v e h i c l e b l o c k s a n d t h e u n l o c k i n g d e v i c e ( b r a i d e d c a b l e ) f r o m t h e t o o l b o x ( s e e “ C h a n g i n g a w h e e l ” , p a r a g r a p h o n “ T o o l s ” ) .
3. Immobilise the vehicle by placing blocks at the front and at the rear of one of the rear wheels.
4. Slide the front left-hand seat back as far as possible.
5. L i f t u p t h e fl o o r p l u g B in the carpet under the seat.
6. Pierce the tab C on the tube D with the unlocking device.
7. Place the unlocking device in the tube D.
8. Turn the unlocking device clockwise. For safety reasons, it is essentialto continue turning the device as far as it will go or until you hear a knocking noise. The parking brake is released.
9. Remove the unlocking device and store it with the blocks in t he toolbox.
Note : - The operation of the parking brake re-initialises when the ignition is switched off then on again. If the reinitialisation of the parking brake proves impossible, contact a CITROËN dealer.off then on again. If the reinitialisation again. If
- The subsequent time required for application may be longer t han during normal operation.
For safety reasons, after this manoeuvre it is essential to contact a CITROËN dealer urgently to have the plug replaced.Following an emergency unlocking, immobilisation of the vehicle is no longer guaranteed once the manual emergency unlocking has been deployed and the manual control d oes not allow the re-application of your park-ing brake.Take no action, either on control A, or stopping starting the engine while the unlocking device is engaged.Take care not to allow moisture or dust in the proximity of the plug.
E L E C T R O N I C P A R K I N G B R A K E
E M E R G E N C Y U N L O C K I N G
Page 71 of 266
IISITUATIONCONSEQUENCES
1Electronic parking brake fault and display of message “ P a r k i n g b r a k e f a u l t y” and the following warning lamps :
If the electronic parking brake fault warning lamp and the serv-ice warning lamp light up, position the vehicle in a safe loca- t i o n ( o n fl a t g r o u n d , w i t h a g e a r e n g a g e d ) .
2Display of message “ P a r k i n g b r a k e f a u l t y”and the following warning lamps :- The automatic functions are deactivated.
- The hill start assist is unavailable.
- The electronic parking brake is only available manually.
3Display of message “ P a r k i n g b r a k e f a u l t y”and the following warning lamps :- The manual unlocking of the electronic parking brake is una-vailable.
- The hill start assist is unavailable.
- The automatic functions and manual application are still available.
E L E C T R O N I C P A R K I N G B R A K EO P E R A T I N G A N O M A L I E S
If any of these instances arises, contact a CITROËN dealer as soo n as possible.
Page 78 of 266
4
3
A
2 1II
79
All lamps off
LIGHTING CONTROL
1 Stop
2 Automatic lighting
3 Sidelamps
4 Dipped beams / Main beams
Sidelamps on
Dipped beams / main beams on
Turn the ring A forwards.
Turn the ring A forwards.
Automatic lighting of headlamps
The sidelamps and dipped beams come on automatically when the a m b i e n t l i g h t i s i n s u f fi c i e n t o r i f t h e windscreen wipers are in continu-ous operation.
Pull the control stalk fully towards you to swap between dipped beams and main beams.
EXTERIOR SIDE LIGHTERS
These illuminate :
- the zones facing the driver’s and passenger’s doors,
- the zones forward of the door mirrors and rearward of the front doors.
I l l u m i n a t i o n / e x t i n c t i o n
The side lighters come on :
- when you unlock the vehicle or press on the lighting button on the remote control.
- when you remove the key from the ignition,
- when you open a door,
- when you use the remote control to locate your vehicle.
They are timed to go out automati-cally.
They go out as soon as the light is a g a i n s u f fi c i e n t o r a p p r o x . 5 m i n u t e s after the windscreen wipers have ceased.
To activate this function, place the control A on position 2.
Do not cover the sunlight sen-sor which is located behind the interior rear view mirror and visible from outside the wind-screen.
Turn the ring A forwards.
S I G N A L L I N G
Page 79 of 266
4
3
A
2 1II
79
All lamps off
LIGHTING CONTROL
1 Stop
2 Automatic lighting
3 Sidelamps
4 Dipped beams / Main beams
Sidelamps on
Dipped beams / main beams on
Turn the ring A forwards.
Turn the ring A forwards.
Automatic lighting of headlamps
The sidelamps and dipped beams come on automatically when the a m b i e n t l i g h t i s i n s u f fi c i e n t o r i f t h e windscreen wipers are in continu-ous operation.
Pull the control stalk fully towards you to swap between dipped beams and main beams.
EXTERIOR SIDE LIGHTERS
These illuminate :
- the zones facing the driver’s and passenger’s doors,
- the zones forward of the door mirrors and rearward of the front doors.
I l l u m i n a t i o n / e x t i n c t i o n
The side lighters come on :
- when you unlock the vehicle or press on the lighting button on the remote control.
- when you remove the key from the ignition,
- when you open a door,
- when you use the remote control to locate your vehicle.
They are timed to go out automati-cally.
They go out as soon as the light is a g a i n s u f fi c i e n t o r a p p r o x . 5 m i n u t e s after the windscreen wipers have ceased.
To activate this function, place the control A on position 2.
Do not cover the sunlight sen-sor which is located behind the interior rear view mirror and visible from outside the wind-screen.
Turn the ring A forwards.
S I G N A L L I N G
Page 85 of 266
1
2
84
II
REAR VIEW MIRRORS
ADJUSTMENT
This operates with the ignition switched on.
From the driver’s seat position, se-lect the rear view mirror by moving control 1 to the left or right, then adjust the rear view mirror in the four directions by acting on con-trol 2.
Demisting-deicing of the rear view mirrors is coupled with that for the rear screen.
REAR VIEW MIRRORS
FOLDBACK
When the vehicle is parked, the rear view mirrors can be folded back ei-ther manually or electrically.
Electrically
From the central position, a press to the rear on control 1 folds the rear view mirrors back.
The opposite movement is ob-tained by pressing again on the rear of the control.
Electrically and automatically
The rear view mirrors also fold back automatically when you lock the doors.
The rear view mirrors redeploy when you unlock the vehicle, un-less the foldback was performed manually. In this case, you have to press on the rear of the control to deploy them.
Note : The automatic foldback of the rear view mirrors can be deactivated. Contact a CITROËN dealer.
AUTOMATIC TILTING OF
REAR VIEW MIRRORS IN
REVERSE GEAR
This functions enables you to au-tomatically see the ground (pave-ment) when parking using reverse gear.
A d j u s t i n g t h e i n d e x e d p o s i t i o n of the driver’s and passenger’s rear view mirrors
With the engine running :
- Select the rear view mirror using control 1.
- Engage reverse gear, the glass of the rear view mirror positions itself automatically to give a bet-ter sight of the pavement.
- If necessary, adjust your rear view mirror to your preference by means of the electrical control 2. This position is then memorised.
Stopping the rear view mirror i n d e x i n g f u n c t i o n
To stop the function, move control 1 to the central position.
Note : The rear view mirrors re-turn to their original position :
- 20 seconds after reverse gear has been disengaged,
- once you reach a speed of over 10 km/h (approx. 6 mph).
E X T E R I O R R E A R V I E W M I R R O R S
Page 86 of 266
A
II
85
For safety, these ma-noeuvres should not be performed while the vehi-cle is in motion.
FRONT SEAT BELTS
Fastening
Pull the belt down in front of you in a steady movement, making sure that it does not become twisted.
Press the fastening into its buckle.
Check that it is properly secured and that the automatic locking mechanism operates correctly by pulling sharply on the belt strap.
The abdominal part of the strap should be positioned as low down as possible in the lap and as tight as possible.
ADJUSTING THE STEERING
WHEEL
The steering wheel can be adjusted for height and reach. WITH THE VEHICLE STATION-ARY , fi r s t a d j u s t y o u r s e a t t o t h e most suitable position, then adjust the position of the steering wheel. Unlock the steering wheel by pulling the control A towards you. AAdjust the position of the steering wheel then lock it by pushing the c o n t r o l fi r m l y b a c k i n t o i t s i n i t i a l l o -cation.
Note : I f y o u p r e s s fi r m l y o n y o u r steering wheel after locking, a small click may be heard.
S T E E R I N G W H E E L A D J U S T M E N T
S E A T B E L T A D J U S T M E N T
The chest part should be posi-tioned if possible in the channel of the shoulder.
Each belt has a reel that adjusts its length automatically to the girth of the seat occupant.
Height adjustment
The correct positioning of the seat belt reel is around mid-shoulder level.
To adjust the belt, pinch the con-trol and slide it in the direction re-quired.
Unfastening
To unfasten the belt, press on the red button in the buckle.
The belt retracts automatically when not in use.
Page 87 of 266
AB9
0
86
II
SLIDING SUN VISORS
Sliding blinds
Sliding blinds are provided for your protection against bright sunlight. They can be adjusted manually.
- Slide the blind on the visor to the desired position by pushing the area A.
Visor struts
The blinds are extended on the sun visor struts.
Fold the visor downwards, to protect against dazzle to the face.
If dazzle is coming from the side windows, detach the vi-sor from its housing above the centre of the windsc reen and pivot it to the side.
PANORAMIC GLASS ROOF BLIND
Opening the roof blind (positions 1 to 9)
- Rotate the control B to slide the roof blind to the posi-tion desired.
Closing the roof blind (position 0)
- Rotate the control B to position 0 to close the roof blind.The blind has an anti-pinch device.
Note :
- A long press on the locking button on the remote control will close the blind (practical when for example you leave your vehicle on a sunlit carpark).- On returning to your vehicle, a short press on the button B repositions the blind to the last position selected.- Following a fault or after a battery disconnectio n during the movement of the blind or after it has stopped, you have to re-initialise the anti-pinch function. Place the blind in the closed position and press for arou nd 2 seconds on button B.
Do not attach or suspend heavy objects on the slide rail of the sun blind, which also incorporates the in-terior rear view mirror.
R O O F A D J U S T M E N T S