audio Citroen C4 RHD 2015 2.G Owner's Guide

05
250
TRAFFIC INFORMATION
Principal TMC symbols
Red and yellow triangle: traffic information, for example:
Black   and   blue   triangle:   general   information,   for   example:
Weather reports
Modified
  signage
Risk
  of   explosion Traffic
  reports
Narrow   carriageway
Road
  closed
Wind
Slippery surface
Demonstration Fog
Accident
Danger
Parking
d

elay
n

o entry Snow
  /   ice
Roadworks
Traffic
  jam
Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic   report  
is

  transmitted,   the   current   audio   source   (Radio,   CD,   USB,   ...)   is  
interrupted

  automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

  the   audio   source   resumes   at   the   end   of   the   transmission   of  
the message.Press

RADIO   to   display   the   menu.
Select "Service announcements" then
confirm.
Activate
  or   deactivate   "TA"
  then   confirm.
The
  volume   setting   for  
T
A
 
messages   can   be   adjusted   only   during   the  
transmission

  of   this   type   of   alert.
Activate
  or   deactivate   the   function   at   any   time   by   pressing  
the

  button.
During
  a   message,   press   the   button   to   interrupt   it.

06
252
Pairing a Bluetooth telephone
First connectionFor reasons of safety and because they require prolonged attention on  the   part   of   the   driver,   the   operations   for   pairing   the   Bluetooth  
mobile

  telephone   to   the   hands-free   system   of   the   audio   unit   must   be  
carried

  out   with   the  
vehicle stationary
.
In
 
the
 
Bluetooth
 
menu
 
of
 
your
 
telephone,
 
select
 
the
 
name

 
"C
ITR
o
Ë
n"
 
from
 
the
 
list
 
of
 
devices
 
detected. Press
  this   button.
Select "Bluetooth functions "
  and  
confirm.
Select "

Peripherals search "
  and  
confirm.
The

  list   of   peripheral   devices   detected  
is

  displayed.   Wait   until   the   "Connect"
button
  is   available.
USING THE TELEPHONE
You can check the compatibility of your telephone 
at   www.citroen.co.uk   (services).
Activate
  the   telephone's   Bluetooth   function  
and

  ensure   that   it   is   "visible   to   all"   (telephone  
configuration).
q
uick procedure from the telephone
Enter
  a   minimum   4   figure   code   in   the   telephone   and  
confirm.Enter

  the   same   code   in   the   system,  
select "

OK"   and   confirm. Procedure from the system

06
253
Select "Connect"
 
and
 
confirm.
The
 
system
 
offers
 
to
 
connect
 
the
 
telephone:
-

 
in

 
"Hands-free mode" (telephone
only),
-
 
in

 
"Audio"
 
mode
 
(streaming:
 
playing
 
music

 
files
 
on
 
the
 
telephone),
-
 
or

 
"All" (for selection of both
modes).
Select "OK"
 
and
 
confirm.
Then
 
accept
 
automatic
 
connection
 
on
 
the
 
telephone
 
to
 
allow
 
the
 
telephone

 
to
 
reconnect
 
automatically
 
every
 
time
 
the
 
vehicle
 
is
 
started.
The

 
ability
 
of
 
the
 
system
 
to
 
connect
 
in
 
only
 
one
 
mode
 
depends
 
on
 
the

 
telephone.
 
The

 
two
 
modes
 
may
 
both
 
connect
 
by
 
default.
USING THE TELEPHONE
The "Hands-free mode" should be used in preference if "Streaming"
  is   not   desired.
The
  services   available   depend   on   the   network,   the   SIM   card   and   the   compatibility   of   the   Bluetooth   telephone   used.   Check   the   telephone  
manual

  and   with   your   network   provider   for   details   of   the   services   available   to   you.
Depending   on   the   type   of   telephone,   the   system   will   ask   you   to  
accept

  or   not   the   transfer   of   your   contacts.
On   return   to   the   vehicle,the   last   telephone   connected  
automatically

  reconnects,   within   around   30   seconds   after  
switching

  on   the   ignition   (Bluetooth   activated   and   visible).
To
  modify   the   automatic   connection   mode,   remove   the   pairing  
and

  pair   the   telephone   again   with   the   desired   mode.
Enter
  a   minimum   4   figure   code   in   the   telephone  
and

  confirm.
Enter   the   same   code   in   the   system,  
select "

OK"   and   confirm.
Select   the   name   of   the   desired  
peripheral

  from   the   list   of   devices  
detected

  then   confirm.

07
261
RADIO
Access to the "RADIO" menu
"FM / DAB / AM""Change waveband"
("FM / DAB / AM")
"Options" ("TA, RDS, DAB/FM
station tracking")
"Audio settings (see this section)
"Update radio list "
a

lphabetical list of stations
received.
Press 5 or 6 or use the rotary control to select the
previous
 
or
 
next
 
station
 
in
 
the
 
list.
This
 
list
 
can
 
also
 
be
 
displayed
 
by
 
pressing
 
LIST on the
steering

 
mounted
 
controls. Go
  from   the   list   to   the   menu   (left/right).
or
A
 

long
 
press
 
on
 
LIST refreshes
the

 
list
 
of
 
stations
 
received.
Press RADIO.

07
262
RADIO
By alphabetical list
Press RADIO or LIST, select the station
of
  your   choice   and   confirm.
By automatic frequency search
Press 7 or 8
  for   the   automatic   search  
for

  a   lower   or   higher   radio   frequency.
Or
  turn   the   thumb   wheel   at   the   steering  
mounted

  controls.
By manual frequency search
Press 5 or 6
  to   adjust   the   radio  
frequency

  step   by   step.
Selecting a station
The external environment (hill, building, tunnel, underground car park…) may interfere with the reception, including in RDS station tracking mode. This  phenomenon   is   a   normal   result   of   the   way   in   which   radio   waves   are   transmitted   and   does   not   in   any   way   indicate   a   fault   with   the   audio   system.
The
  quality   of   reception   is   represented   by   the   number   of  
active

  waves   in   this   symbol.
Press RADIO or OK
  to   display   the  
contextual

  menu.
Changing waveband
Select "Change waveband".
Select "FM / DAB / AM"   and   confirm.

07
265
RADIO
Press "RADIO".
DAB (Digital Audio Broadcasting)
Digital radio
Digital radio provides a higher quality reception and also the graphical  display   of   information   for   the   radio   station,   by   selecting  
"V

ideo   mode"   in   "Radio   favourites"   (Options).
The
  different   radio   multiplex   services   offer   a   choice   of   stations  
displayed

  in   alphabetical   order.
Select "Change band"
  and   confirm.
Selection " DAB"
  and   confirm.
Digital radio - DAB/FM auto tracking
"DAB" does not have 100% coverage of the country.
When   the   digital   signal   is   weak,   "DAB   /   FM   auto   tracking"   allows   you  
to

  continue   listening   to   the   same   station,   by   automatically   switching  
to

  the   corresponding   analogue   "FM"   station   (if   one   exists).
Change
 
of
 
station
 
in
 
the
 
same
 
"multiplex".
Manual
 
search
 
for
 
a
 
"multiplex". Press "RADIO".
Select "Options
"
  and   confirm.
Select "FM/DAB"
  and   confirm.
If
  "DAB / FM   auto   tracking"   is   on,   there   will   be   a   difference   of   a   few  
seconds

  in   the   programme   when   the   system   changes   to   analogue  
"FM"

  radio   with   sometimes   a   variation   in   volume.
Display
  of   the   "DAB"   band   then   becomes   "DAB   (FM)".
When
  the   strength   of   the   digital   signal   is   good   again,   the   system  
automatically

  switches   back   to   "DAB".
If
  the   "DAB"   station   you   are   listening   to   is   not   available   on   "FM"  
("

DAB/FM"   option   greyed   out),   or   if   "DAB   /   FM   auto   tracking"   is   not  
on,

  the   sound   will   be   cut   when   the   digital   signal   is   too   weak.

08
266
MUSIC MEDIA PLAYERS
Access to the "MUSIC MEDIA PLAYER" menu
"MEDIA"
"Change Media"
"Eject USB device"
  (if   USB  
connected)
"

Play mode" ("Normal",
"Random", "Random on all
media", "Repetition")
"Audio settings " (see this section)
"Activate / Deactivate AUX input "
List
 
of
 
the
 
current
 
media
 
tracks.
This

 
list
 
can
 
also
 
be
 
displayed
 
by
 
pressing
 
LIST
at

 
the
 
steering
 
mounted
 
controls. Go
  from   the   list   to   the   menu   (left/right).
or
Press MUSIC.

08
267
MUSIC MEDIA PLAYERS
CD, MP3 CD / USB player
The audio equipment will only play audio files with ".wma, .aac, .flac, .ogg
  and   .mp3"   file   extensions   and   with   a   bit   rate   of   between   32   Kbps  
and

  320   Kbps.
It
  also   supports   VBR   (Variable   Bit   Rate)   mode.
No
  other   type   of   file   (.mp4,   .m3u...)   can   be   played.
WMA
 

files   must   be   of   the   standard   wma   9   type.
The
  sampling   rates   supported   are   greater   than   32   KHz.
It
  is   advisable   to   restrict   file   names   to   20   characters,   without   using   of  
special

  characters   (e.g.:   "   "   ?   ;   ù)   to   avoid   any   playing   and   displaying  
problems.
In

  order   to   be   able   to   play   a   recorded   CDR   or   CDRW,   when   recording  
it

  is   preferable   to   select   the   ISO   9660   level   1,   2   or   Joliet   standard.
If
  the   disc   is   recorded   in   another   format   (udf,   ...),   it   may   not   be   played  
correctly

.
It
  is   recommended   that   the   same   recording   standard   is   always   used  
for

  an   individual   disc,   with   as   low   a   speed   as   possible   (4x   maximum)  
for

  optimum   sound   quality.
In
  the   particular   case   of   a   multi-session   CD,   the   Joliet   standard   is  
recommended.Information and advice
The
  system   supports   USB   mass   storage   or   iPod  
devices

  via   the   USB   port   (suitable   cable   not   supplied).
If
  a   partitioned   USB   memory   key   is   connected   to   the  
system,

  only   the   first   partition   is   recognised.
Control
  of   the   peripheral   device   is   with   the   audio  
system

  controls.
The
  number   of   tracks   is   limited   to   2000   maximum,  

999

  tracks   per   folder.
If
  the   current   consumption   at   the   USB   port   exceeds  
500

  mA,   the   system   goes   into   protection   mode   and  
deactivates

  the   port.
Other
  peripherals,   not   recognised   on   connection,   must  
be

  connected   to   the   auxiliary   socket   using   a   Jack   cable  
(not

  supplied).
Use
  only   USB   memory   sticks   formatted   FAT
 
32   (File  
Allocation
 
T
able).
The
  system   does   not   support   the   operation   of   an  
Apple® player and a USB
 
memory
 
stick
 
connected
 
at
 
the
 
same
 
time.
It
 
is
 
recommended
 
that
 
official
 
Apple® USB cables are used to ensure correct
 
operation.

08
270
Audio streaming
Streaming allows audio files on your telephone to be played via the vehicle's  speakers.
Connect
  the   telephone:   see   "USING THE TELEPHONE ".
Select "Audio" or "All"
  profile.
If
  play   does   not   start   automatically,   it   may   be   necessary   to   start   the  
audio

  playback   from   the   telephone.
Control
  is   from   the   peripheral   device   or   by   using   the   audio   system  
buttons.
Once

  connected   in   streaming   mode,   the   telephone   is   considered   to   be  
a

  media   source.
It
  is   recommended   that   you   activate   "Repeat" on the b luetooth
peripheral.
MUSIC MEDIA PLAYERS
Connecting APPLE® players
Connect the apple® player to the USB port using a suitable cable (not supplied).
Play
 
starts
 
automatically.
Control
 
is
 
via
 
the
 
audio   system.
The
 
classifications
 
available   are   those   of   the   portable   device  
connected

 
(artists
 
/
  albums   /   genres   /   playlists   /   audiobooks   /  
podcasts).
The

 
default
 
classification   used   is   by   artist.  
T
o   modify   the   classification  
used,

 
return
 
to
 
the
 
first   level   of   the   menu   then   select   the   desired  
classification

 
(playlists   for   example)   and   confirm   to   go   down   through  
the

 
menu
 
to
 
the
 
desired   track.
The
 
"Shuffle
 
tracks"   mode   on   an   iPod
® corresponds to the "Random" mode
 
on
 
the
 
audio
 
system.
The
 
"Shuffle
 
albums"
 
mode
 
on
 
an
 
iPod
® corresponds to the "Random all"
 
on
 
the
 
audio
 
system.
"Shuffle
 
tracks"
 
is
 
restored
 
by
 
default
 
on   each   connection.
The
 
version
 
of
 
software
 
in
 
the
 
audio
 
system   may   not   be   compatible  
with

 
the
 
generation
 
of
 
your
 
Apple® player.

08
271
MUSIC MEDIA PLAYERS
Using the auxiliary input (AUX)
j

ACK/USB audio cable not supplied
Connect the portable device (MP3, WMA  player…)   to   the   JACK  auxiliary
  audio   socket   or   USB   port   using   a   suitable   cable.Press MUSIC
  to   display   the   "MUSIC"
menu.
Select "Activate / Deactivate AUX
input "
  and   confirm.
First
  adjust   the   volume   of   your   portable  
device

  (to   a   high   level).  
Then
  adjust   the  
volume

  of   your   audio   system.
Display
  and   management   of   the   controls   are   via   the   portable   device.