ignition Citroen DS3 2015 1.G User Guide

33
DS3_en_Chap01_controle-de-marche_ed01-2015
Warning/indicator lampis on Cause Action / Observations
AdBlue
® additive
(BlueH
d i d iesel) fixed,
  on   switching  o
n   the   ignition,  
a

ccompanied   by   an  
a

udible   signal   and   a  
m

essage   indicating  
t

he
 r
emaining
 d
riving
 ra

nge. The
  remaining   driving   range   is  b
etween   350   miles   (600   km)   and  
1

500 miles   (2400   km).Have the AdBlue® additive tank topped up as soon a
s
 
possible:
 
go
 
to
  a   CITROËN   dealer   or   a   qualified  
w

orkshop,
 
or
 
carry   out   this   operation   yourself   by  
r

eferring
 
to
 
the
 
corresponding   section.
+ flashing
 a

ssociated
 w

ith
 t

he
 
SERVICE
 
warning
 l

amp,
 
accompanied
 
by
 a

n
 
audible
 
signal
 
and
 a

 
message
 
indicating
 t

he
 r

emaining
 d

riving
 ra

nge. The
 
remaining
 
driving
 
range
 
is
 
b

etween
 
0
 
and
 
350
 
miles
 
(600
 
km). You
 
must
 
top-up the AdBlue
® additive tank to avoid
a
breakdown :
 
go
 
to
 
a
 
CITROËN   dealer   or   a   qualified  
w

orkshop,
 
or
 
carry
 
out
 
this
 
operation   yourself   by  
r

eferring
 
to
 
the
 
corresponding
  section.
flashing,
 
associated
 
w

ith the SERVICE
warning
 lam

p,
 a

ccompanied
 
by
 
an
 
a

udible
 
signal
 
and
 
a
 
m

essage
 
indicating
 
t

hat
 
starting
 
is
 
p

revented. The AdBlue
® tank is empty: the s
tarting
 
inhibition   system   required  
b

y
 
legislation   prevents   starting   of   the  
e

ngine. To
  be   able   to   start   the   engine,   you   must   top-up the
AdBlue® additive tank: go to a CITROËN dealer or a q
ualified   workshop,   or   carry   out   this   operation   yourself  
b

y
 
referring   to   the   corresponding   section.
It is essential
 

to   add   at   least   3.8   litres   of   AdBlue
® to
the
 
additive
 
tank.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2015
Warning/indicator lampis on Cause Action / Observations
+
+ SCR emissions
control system

(BlueH
d i d iesel)fixed,
  on   switching   on   the  
i

gnition,   associated   with  
t

he   SERVICE   and   engine  
d

iagnostic   warning   lamps,  
a

ccompanied   by   an   audible  
s

ignal   and   a   message.A
  fault   with   the   SCR   emissions   control  
s

ystem   has   been   detected.This
  alert   disappears   once   the   exhaust  
e

missions   return   to   normal   levels.
flashing,
  on   switching   on  
t

he   ignition,   associated   with  
t

he   SERVICE   and   engine  
d

iagnostic   warning   lamps,  
a

ccompanied   by   an   audible  
s

ignal   and   a   message  
i

ndicating
 t
he
 r
emaining
 d
riving
 ra

nge. After
  confirmation   of   the   fault   with   the  
e

missions   control   system,   you   can  
d

rive   for   up   to   650   miles   (1   100   km)  
b

efore   the   engine   starting   inhibition  
s

ystem   is   triggered.Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   without delay, to avoid a
breakdown .
flashing,
  on   switching   on  
t

he   ignition,   associated   with  
t

he   SERVICE   and   engine  
d

iagnostic   warning   lamps,  
a

ccompanied   by   an   audible  
s

ignal   and   a   message.You
  have   exceeded   the   authorised  
d

riving   limit   following   confirmation  
o

f   a   fault   with   the   emissions   control  
s

ystem:   the   engine   starting   inhibition  
s

ystem   prevents   starting   of   the  
e

ngine.To
  be   able   to   start   the   engine,   you   must call
on
  a   CITROËN   dealer   or   a   qualified   workshop.

DS3_en_Chap01_controle-de-marche_ed01-2015
System which informs the driver when the next   service   is   due,   in   accordance   with   the  
ma

nufacturer's
 ser
vicing
 s
chedule.
Service indicator
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 5 seconds after the ignition is switched on, the   spanner   symbolising   the   service   operations  
c

omes   on.   The   distance   recorder   display   line  
i

ndicates   the   distance   remaining   before   the  
n

ext   service   is   due.
Example:
 

1   739   miles   (2   800   km)   remain  
b

efore   the   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he spanner goes off ;
  the   distance   recorder  
r

esumes   its   normal   operation.   The   screen   then  
i

ndicates   the   total   distance.
For BlueHDi Diesel versions, the
degree
 
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
i

s
 
also
 
taken
 
into
 
account
 
(depending
 
o

n
 
the
 
country
 
of
 
sale).
The
 
point
 
at
 
which
 
the
 
next
 
service
 
is
 
due
 
is
 
c

alculated
 
from
 
the
 
last
 
indicator
 
zero
 
reset,
 
d

epending
 
on
 
the
 
distance
 
travelled
 
and
 
the
 
t

ime
 
elapsed
 
since
 
the
 
last
 
service.
More than 1 800 miles (3 000 km)
remain before the next service is
due
When the ignition is switched on, no service i nformation   appears   in   the   screen.

37
DS3_en_Chap01_controle-de-marche_ed01-2015
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560   miles   (900   km)   remain   before  t
he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on to
indicate
  that   a   service   must   be   carried   out  
s

oon. 5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on.
Service overdue
For 5 seconds after the ignition is switched on, the spanner flashes to indicate that the service
must
  be   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   186   miles
 (

300   km).
For
  5   seconds   after   the   ignition   is   switched   on,
 t

he   screen   indicates: For BlueHDi Diesel versions, this alert
may
  also   be   accompanied   by   the   fixed  
i

llumination   of   the   service   warning   lamp  
w

hen   the   ignition   is   on.
The
  distance   remaining   may   be  
w

eighted   by   the   time   factor,   depending  
o

n   the   driving   conditions.
Therefore,
  the   spanner   may   also   come  
o

n   if   you   have   exceeded   the   period  
s

ince the last service, indicated in the
manufacturer's
 ser

vice
 s
chedule.
For BlueHDi Diesel versions, the
spanner
  may   also   be   brought   on   earlier  
t

han   expected,   depending   on   the  
d

egree   of   deterioration   of   the   engine   oil  
(

depending   on   the   country   of   sale).
The
  rate   of   deterioration   of   the   engine  
o

il   depends   on   the   driving   conditions   in  
w

hich   the   vehicle   is   used.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2015
Service indicator zero reset
After each service, the service indicator must be   reset   to   zero.
The
  procedure   for   resetting   to   zero   is   as  
f

ollows:
F
 
s
witch   off   the   ignition,
F

p
ress and hold the trip distance recorder
zero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F

w
hen the display indicates "=0" , release
the
  button;   the   spanner   disappears. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Retrieving the service
information
You can access the service information at any t
ime.
F

P
ress the trip distance recorder zero reset
button.
 T

he   service   information   is   displayed   for   a  
f

ew   seconds,   then   disappears.

39
DS3_en_Chap01_controle-de-marche_ed01-2015
On vehicles fitted with an electric oil level
indicator,  information   on   the   oil   level   is  
d

isplayed   in   the   instrument   panel   for   a   few  
s

econds   when   the   ignition   is   switched   on,   after  
t

he   service   information.
Engine oil level indicator*
The level shown will only be correct
if  the   vehicle   is   on   level   ground   and  
t

he   engine   has   been   off   for   more   than  
3

0 minutes.
Oil level correct
Oil level low
This is indicated by the flashing of " O I L" ,
a ccompanied   by   illumination   of   the   service  
w

arning   lamp,   an   audible   signal   and   a  
m

essage.
If
  the   low   oil   level   is   confirmed   by   a   check   using  
t

he   dipstick,   the   level   must   be   topped   up   to  
p

revent   damage   to   the   engine.
Refer
  to   the   "Checking   levels"   section.
Oil level indicator fault
This is signaled by the flashing of "OIL- -".
C ontact   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
In the event of a fault with the electric oil level
indicator,
  the   engine   oil   level   is   no   longer  
mon

itored.
While
  the   system   is   faulty,   you   should   check  
t

he   engine   oil   level   using   the   manual   dipstick  
l

ocated   under   the   bonnet.
Refer
  to   the   "Checking   levels"   section.
*
  Depending   on   version.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2015
The total and trip distances are displayed for
thirty  seconds   when   the   ignition   is   switched   off,  
w

hen   the   driver's   door   is   opened   and   when   the  
v

ehicle   is   locked   or   unlocked.
distance recorders
Total distance recorder
It measures the total distance travelled by the vehicle   since   its   first   registration.
When
 
travelling
 
abroad,
 
you
 
may
 
h

ave
 
to
 
change
 
the
 
units
 
of
 
distance:
 
t

he
 
display
 
of
 
road
 
speed
 
must
 
be
 
in
 
t

he
 
official
 
units
 
(miles
 
or
 
km)
 
for
 
the
 
c

ountry.
 
The
 
change
 
of
 
units
 
is
 
done
 v
ia
 
the
 
screen
 
configuration
 
menu,
 
with
 t
he
 
vehicle
 
stationary.
Trip distance recorder
It measures the distance travelled since it was r
eset   to   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   the   button   until  
z

eros   appear.

57
DS3_en_Chap01_controle-de-marche_ed01-2015
Trip computer, a few definitions
Range
(miles or km)
Current fuel consumption
(mpg or l/100 km or km/l)
Stop & Start time
counter
(minutes / seconds or hours / minutes)
This
 
value
 
may
 
vary
 
following
 
a
 
change
 
i

n
 
the
 
style
 
of
 
driving
 
or
 
the
 
relief,
 
r

esulting
 
in
 
a
 
significant
 
change
 
in
 
the
 
c

urrent
 
fuel
 
consumption.
If dashes are displayed continuously
while
 
driving
 
in
 
place
 
of
 
the
 
digits,
 
c

ontact a CITROËN dealer or a
qualified
 w

orkshop.
When
 
the
 
range
 
falls
 
below
 
20
 
miles
 
(30
 
km),
 
d

ashes
 
are
 
displayed.
 
After
 
filling
 
with
 
at
 
least
 
5

 
litres
 
of
 
fuel,
 
the
 
range
 
is
 
recalculated
 
and
 
is
 
d

isplayed
 
when
 
it
 
exceeds
 
60
 
miles
 
(100
 
km).
distance remaining to
destination
(miles or km)
T
he distance which can still be travelled with
the
 
fuel
 
remaining
 
in
 
the
 
tank
 
(related
 
to
 
the
 
a

verage
 
fuel
 
consumption
 
over
 
the
 
last
 
few
 
m

iles
 (

kilometres)
 t

ravelled). Calculated
 
over
 
the
 
last
 
few
 
seconds.
This
 
is
 
the   distance   remaining   to   be   travelled  
t

o
 
the
 
final   destination.   It   can   be   entered   by  
t

he user.
If the distance is not entered, dashes are
displayed
  in   place   of   the   digits.
If
 
your
 
vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter
 
calculates   the   time   spent   in   STOP  
m

ode
 
during   a   journey.  
I

t
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on   with   the   key.
distance travelled
(miles or km)
C
alculated
 
since   the   last   trip   computer   reset.
Average speed
(mph or km/h)
C
alculated   since   the   last   trip   computer   reset.
Average fuel
consumption
(mpg or l/100 km or km/l)
C
alculated
 
since   the   last   trip   computer   reset.
This
 
function   is   only   displayed   from  
2

0 mph
  (30   km/h).
Monitoring

DS3_en_Chap02_ouvertures_ed01-2015
Following disconnection of the vehicle battery, replacement   of   the   remote   control   battery   or  
i

n   the   event   of   a   remote   control   malfunction,  
y

ou   can   no   longer   unlock,   lock   or   locate   your  
v

ehicle.
F
 
F
irst   of   all,   use   the   key   in   the   lock   to   unlock  
o

r   lock   your   vehicle.
F
 
T
hen,   reinitialise   the   remote   control.
If
  the   problem   persists,   contact   a   CITROËN  
d

ealer   as   soon   as   possible.
Remote control problem
Reinitialisation
F Switch  off   the   ignition.
F  T urn   the   key   to   position   2 (Ignition).
F
 
P
ress   the   closed   padlock   immediately   for   a  
f

ew   seconds.
F
 
S
witch   off   the   ignition   and   remove   the   key  
f

rom   the   ignition   switch.
The
  remote   control   is   fully   operational   again.
Changing the battery
Battery ref.: CR1620 / 3 volts.F  U nclip   the   casing   by   inserting   a   coin   at   the  
n

otch   and   rotating.
F
 
S
lide   the   flat   battery   out   of   its   location.
F

S
lide the new battery into its location
observing
  the   original   direction.
F
 
C
lip   the   casing   in   place,   then   the   chrome  
f

inisher.
F
 
R
einitialise   the   remote   control.
If the battery is flat, you are
informed
  by   lighting   of   this   warning  
l

amp   in   the   instrument   panel,   an   audible   signal  
a

nd   a   message   in   the   multifunction   screen.
F
 
U
nfold   the   key.
F
 
R
elease   the   chrome   finisher   by   pressing   on  
l

ug   A.
F
 
M
aintain   pressure   on   lug   A   and   remove   the  
c

hrome   finisher   by   sliding   it   off   at   45°.

63
DS3_en_Chap02_ouvertures_ed01-2015
Do not throw the remote control batteries   away,   they   contain   metals  
w

hich   are   harmful   to   the   environment.
Take
  them   to   an   approved   collection  
po

int.Lost keys
Go to a CITROËN dealer with the vehicle's registration document, your personal identification   documents   and   if   possible   the   key   code   label.
The
  CITROËN   dealer   will   be   able   to   look   up   the   key   code   and   the   transponder   code  
r

equired   to   order   a   new   key.
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket   as   there   is   a   possibility   that   it   may   unlock   the   vehicle,   without   you   being   aware   of   it.
Do
  not   repeatedly   press   the   buttons   of   your   remote   control   out   of   range   and   out   of   sight   of  
y

our   vehicle.   You   run   the   risk   of   stopping   it   from   working   and   the   remote   control   would   have  
t

o   be   reinitialised.
No
  remote   control   can   operate   when   the   key   is   in   the   ignition   switch,   even   when   the   ignition  
i

s   switched   off,   except   for   reinitialisation.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency   services   more   difficult   in   an   emergency.
As
  a   safety   precaution,   never   leave   children   alone   in   the   vehicle,   except   for   a   very   short
 p

eriod.
In
  all   cases,   it   is   essential   to   remove   the   key   from   the   ignition   switch   when   leaving   the   vehicle.
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause m alfunctions.
When purchasing a second-hand vehicle
Have the pairing of all of the keys in your possession checked by a CITROËN dealer, to ensure   that   only   your   keys   can   be   used   to   open   and   start   the   vehicle.
Access