warning Citroen DS3 RHD 2016 1.G Owner's Guide

Operating fault
With the ignition on, if this warning lamp   comes   on   and   AUTO flashes,
accompanied
  by   an   audible   signal   and   a  
m

essage
 
in
  the   multifunction   screen,   this  
i

ndicates
 
a
 
gearbox   fault.
Have
 
it
 
checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w

orkshop.
Reinitialisation
(5-speed electronic
gearbox)
In exceptional circumstances, the g earbox   may   need   an   automatic  
r

einitialisation:   starting   and   gear  
c

hanging   are   no   longer   possible.
AUTO
 

and   - - appear in the
instrument
 pan

el.
AUTO
 

and
 
- - appear in the
instrument
 pan

el.
F

Sel

ect position
n
.
F

 
P

ress
 
the
 
brake
 
pedal.
F
 
W

ait
 
for
 
around
 
30
 
seconds
 
until
 n
or a
gear
 
appears
 
in
 
the
 
instrument
 
panel.
F
 
M

ove
 
the
 
gear
 
selector
 
to
 
position
 
A , then
to position
n
.
F

 
W

ith
 
your
 
foot
 
still
 
on
 
the
 
brake
 
pedal,
 
start
 
t

he
 eng

ine.
The
 
gearbox
 
is
 
operational
 
again.
Following
 
disconnection
 
of
 
the
 
battery,
 
it
 
is
 n
ecessary
 
to
 
reinitialise
 
the
 
gearbox.
F
 
S

witch
 
on
 
the
 
ignition.
Follow
  the   procedure   described   above.

When you move the selector in the gate to select   a   position,   the   corresponding   indicator   is  
d

isplayed   in   the   instrument   panel.
P.
 Pa

rk
R.
R

everse
n. N

eutral
d

.
 D
rive   (Automatic   driving)
S.
Sport
 pro
gramme
T .
Snow
 pro
gramme
1 2 3 4.
  
G
ears   engaged   during   manual  
ope

ration
-.
 I

nvalid   value   during   manual   operation
displays in the instrument panel
Foot on brake
F Press  the   brake   pedal   when   this  i
ndicator   lamp   is   displayed   in   the  
i

nstrument   panel   (e.g.:   starting  
t

he
 eng
ine).
Moving off
If position n is selected inadvertently while   driving,   allow   the   engine   to  
r

eturn   to   idle   then   select   position  d to
accelerate.
If
  the   ambient   temperature   is  
b

elow -23°C,   the   engine   should   be   left  
a

t   idle   for   four   minutes,   to   ensure   the  
c

orrect   operation   and   life   of   the   engine  
an

d
 g
earbox. When
  the   engine   is   running   at   idle,   with  
t

he   brakes   released,   if   position   R
, d or
M   is   selected,   the   vehicle   moves   even  
w

ithout   the   accelerator   being   pressed.
When   the   engine   is   running,   never  
l

eave   children   in   the   vehicle   without  
sup

ervision.
When   carrying   out   maintenance   with  
t

he   engine   running,   apply   the   parking  
b

rake   and   select   position   P
.
F
 
A

pply   the   parking   brake.
F

Sel
ect position P or n
.
F

 
S

tart   the   engine.
If
 
this
 
procedure   is   not   followed,   there   is   an  
a

udible   signal,   accompanied   by   the   display   of  
a

n
 
warning   message.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F
 
R

elease   the   parking   brake.
F

Sel
ect position R
, d or M
.
F
 
G

radually   release   the   brake   pedal.
The
 
vehicle   moves   off   immediately.

There is a risk of damage to the gearbox:
-  i f   you   press   the   accelerator   and  
b

rake   pedals   at   the   same   time,
-
 
i
f   you   force   the   movement   of   the  
s

elector   from   the   P position to
another position when the battery
is
  flat.
To
  reduce   fuel   consumption   when   at  
a

  prolonged   standstill   with   the   engine  
r

unning   (traffic   jam...),   put   the   selector  
i

n the n  position   and   apply   the   parking  
b

rake.
If the selector is not in position P
,
when
 
the
 
driver's
 
door
 
is
 
opened
 
or
 
a

pproximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F

R

eturn the selector to position P ;
 
t

he
 
message
 
disappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace.
Operating fault
Manual operation
When the ignition is on, the lighting o
f   this   warning   lamp,   accompanied  
b

y
 
an
 
audible   signal   and   a   message   in   the  
m

ultifunction   screen,   indicates   a   gearbox   fault.
In
 
this
 
case,   the   gearbox   switches   to   back-up  
m

ode
 
and
 
is   locked   in   3rd   gear.   You   may   feel  
a

 
substantial   knock   when   changing   from   P
to R
 
and
 
from  n to R .
  This   will   not   cause   any  
d

amage
 
to
 
the   gearbox.
Do
 
not
 
exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact
 
a
 
CITROËN   dealer   or   a   qualified  
w

orkshop
 
as   soon   as   possible.
F
Sel
ect position M for sequential c
hanging o
f
 
the
 
four
 
gears.
F
 
P

ush
 
the
 
selector
 
towards
 
the
 
+
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F
 
P

ull
 
the
 
selector
 
towards
 
the
 
-
 
sign
 
to
 
c

hange
 
down
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 
p

ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 
t

emporarily
 
in
 
automatic
 
mode. This
 
symbol
 
is
 
displayed
 
if
 
a
 
gear
 
i

s
 
not
 
engaged
 
correctly
 
(selector
 
b

etween
 
two
 
positions).
d

 
disappears
 
and
 
the
 
gears
 
e

ngaged
 
appear
 
in
 
succession
 
in
 
the
 
in

strument
 pan

el.
Stopping the vehicle
Before switching off the engine, you can engage p osition P or
n 
to   place   the   gearbox   in   neutral.
In
  both   cases,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle.
Invalid value during manual
operation
If the engine speed is too low or too high, the gear   selected   flashes   for   a   few   seconds,   then  
t

he   actual   gear   engaged   is   displayed.
It
  is   possible   to   change   from   position  d
(automatic)
  to   position   M   (manual)   at   any   time.
When
  the   vehicle   is   stationary   or   moving  
v

ery   slowly,   the   gearbox   selects   gear   M1
automatically.
The
  sport   and   snow   programmes   do   not  
o

perate   in   manual   mode.

Moving off
F Apply  the   parking   brake.
F Sel ect position P or n.
F
 
S
tart   the   engine.
If
  these   conditions   are   not   met,   there   is   an  
a

udible   signal,   accompanied   by   the   display   of  
a

n   warning   message.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F
 
R
elease   the   parking   brake.
F

Sel
ect position R ,
d or M.
F
 
G
radually   release   the   brake   pedal.
The
  vehicle   moves   off   immediately.
If position
n  is   selected   inadvertently  
w

hile   driving,   allow   the   engine   to  
r

eturn   to   idle   then   select   position  d to
accelerate.
If
  the   ambient   temperature   is  
b

elow -23°C,   the   engine   should   be   left  
a

t   idle   for   four   minutes,   to   ensure   the  
c

orrect   operation   and   life   of   the   engine  
an

d
 g
earbox. When
  the   engine   is   running   at   idle,   with  
t

he   brakes   released,   if   position   R,
d or
M
  is   selected,   the   vehicle   moves   even  
w

ithout   the   accelerator   being   pressed.
When
  the   engine   is   running,   never  
l

eave   children   in   the   vehicle   without  
sup

ervision.
When
  carrying   out   maintenance   with  
t

he   engine   running,   apply   the   parking  
b

rake   and   select   position   P.

To reduce fuel consumption when at a  prolonged   standstill   with   the   engine  
r

unning   (traffic   jam...),   put   the   selector  
i

n the n  position   and   apply   the   parking  
b

rake.
If the selector is not in position P
,
when
 
the
 
driver's
 
door
 
is
 
opened
 
or
 
a

pproximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F
R
eturn the selector to position P
;
 t
he
 
message
 
disappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace. There
  is   a   risk   of   damage   to   the   gearbox:
-  
i
f   you   press   the   accelerator   and  
b

rake   pedals   at   the   same   time,
-  
i
f   you   force   the   movement   of   the  
s

elector   from   the   P position to
another position when the battery
is   flat.
F

Sel

ect position M for sequential
 c

hanging
 o

f
 
the
 
six
 
gears.
F
 
M

ove
 
the
 
selector
 
towards
 
the
 
+
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F
 
M

ove
 
the
 
selector
 
towards
 
the
 
-
 
sign
 
to
 
c

hange
 
down
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 
p

ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 
t

emporarily
 
in
 
automatic
 
mode.
Manual operation
d disappears and the gears e
ngaged   appear   in   succession   in   the  
in

strument
 pan
el.
If
 
the
 
engine   speed   is   too   low   or   too   high,   the  
g

ear
 
selected   flashes   for   a   few   seconds,   then  
t

he
 
actual
  gear   engaged   is   displayed.
It
 
is
 
possible   to   change   from   position  d
(automatic)
  to   position   M   (manual)   at   any   time.
When
 
the
  vehicle   is   stationary   or   moving  
v

ery
 
slowly,   the   gearbox   engages   first   gear  
au

tomatically.
Invalid value during manual
operation
This symbol is displayed if a gear i s   not   engaged   correctly   (selector  
b

etween   two   positions).
Stopping the vehicle
Before switching off the engine, you can engage   position   P or n  to   place   the   gearbox   in  
neu

tral.
In
  both   cases,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle. When
  the   ignition   is   on,   the   lighting  
o

f   this   warning   lamp,   accompanied  
Operating fault
by an audible signal and a message in the m
ultifunction   screen,   indicates   a   gearbox   fault.
In
  this   case,   the   gearbox   switches   to   back-up  
m

ode   and   is   locked   in   3rd   gear.   You   may   feel  
a

  substantial   knock   when   changing   from   P
to R
  and   from  n to R.
  This   will   not   cause   any  
d

amage   to   the   gearbox.
Do
  not   exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   as   soon   as   possible.

Stop & Start
Operation
going into engine STOP mode
For your comfort, during parking manoeuvres,   STOP   mode   is   not  
a

vailable   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
Stop
  &   Start   mode   does   not   affect   the  
f

unctionality of the vehicle, such as for
example,
  braking,   power   steering...
Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   key.
The "ECO" 
warning
 
lamp
 
comes
 o
n
 
in
 
the
 
instrument
 
panel
 
and
 
the
 
e

ngine
 
goes
 
into
 
standby:
-
 
w

ith a manual gearbox , when stationary
or
 
at
 
speeds
 
below
 
12
 
mph
 
(20
 
km/h)
 
(

depending
 
on
 
version),
 
when
 
you
 
put
 
the
 
g

ear
 
lever
 
into
 
neutral,
 
and
 
you
 
release
 
the
 
c

lutch
 
pedal.
-
 
w

ith a 5 or 6-speed electronic gearbox ,
when
 
stationary
 
or
 
at
 
speeds
 
below
 
5
 
mph
 
(

8
 
km/h)
 
(depending
 
on
 
version),
 
when
 
y

ou
 
press
 
the
 
brake
 
pedal
 
or
 
put
 
the
 
gear
 
s

elector in position
n
.
-

 
w

ith an automatic gearbox , vehicle
stationary,
 
when
 
you
 
press
 
the
 
brake
 
pedal
 
o

r
 
you
 
place
 
the
 
gear
 
selector
 
in
 
position
 n
.
A

 
time
 
counter
 
calculates
 
t

he
 
sum
 
of
 
the
 
periods
 
in
 
S

TOP mode
 
during
 
a
 
journey.
 
I

t
 
rests
 
itself
 
to
 
zero
 
every
 
time
 
t

he
 
ignition
 
is
 
switched
 
on
 
with
 
t

he
 
key.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
t

emporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
s

tops
 
in
 
the
 
traffic
 
(red
 
lights,
 
traffic
 
jams...).
The
 
engine
 
restarts
 
automatically
 
-
 
START
 
m

ode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
off.
 T
he
 
restart
 
takes
 
place
 
instantly,
 
quickly
 
and
 sil
ently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
r

educes
 
fuel
 
consumption
 
and
 
exhaust
 
e

missions
 
as
 
well
 
as
 
the
 
noise
 
level
 
when
 
s

tationary.

125
going into engine START mode
The "ECO" warning   lamp   goes   off  a
nd   the   engine   starts:
-
 
w

ith a manual gearbox , when you
depress
  the   clutch   pedal,
-
 
w

ith an electronic or automatic
gearbox :
●
 
g

ear   selector   in   position   A / d or M,
when
  you   release   the   brake   pedal,
●
 
o

r
 
gear   selector   in   position  n  and   the  
b

rake   pedal   released,   when   you   move  
t

he
  gear   selector   to   position   A / d or M,
●
 
o

r
 
when   you   engage   reverse   gear.
Special cases: START invoked
automatically
For reasons of safety and for your comfort, START   mode   is   invoked   automatically   when:
-
 
y
ou   open   the   driver's   door,
-
 
y
ou   unfasten   the   driver's   seat   belt,
-
 
t
he   speed   of   the   vehicle   exceeds   7   mph  
(11
  km/h)   with   the   electronic   gearbox  
s

ystem,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   for   control   of   a   system.
The "ECO"
 

warning   lamp   flashes   for  
a

  few   seconds,   then   goes   off.
This operation is perfectly normal.
With
 
a
 
manual
 
gearbox
 
in
 
STOP
 
m

ode,
 
if
 
you
 
engage
 
a
 
gear
 
without
 
f

ully
 
depressing
 
the
 
clutch
 
pedal,
 
a
 
m

essage
 
is
 
displayed
 
asking
 
you
 
to
 
f

ully
 
depress
 
the
 
clutch
 
pedal
 
so
 
that
 
t

he
 
engine
 
can
 
restart.
STOP
 
mode
 
is
 
not
 
invoked
 
when:
-
 t
he
 
driver's
 
door
 
is
 
open,
-
 
t

he
 
driver's
 
seat
 
belt
 
is
 
not
 
fastened,
-
 
t

he
 
vehicle
 
has
 
not
 
exceeded
 
6
 
mph
 

(10
 
km/h)
 
since
 
the
 
last
 
engine
 
start
 
using
 
t

he
 
key,
-
 
t

he
 
engine
 
is
 
needed
 
to
 
maintain
 
a
 
c

omfortable
 
temperature
 
in
 
the
 
passenger
 
c

ompartment,
-
 
d

emisting
 
is
 
active,
-
 
s

ome
 
special
 
conditions
 
(battery
 
charge,
 
e

ngine
 
temperature,
 
braking
 
assistance,
 
a

mbient
 
temperature...)
 
where
 
the
 
engine
 
is
 
n

eeded
 
to
 
assure
 
control
 
of
 
a
 
system.
Special cases: STOP mode not
available
The "ECO"  warning   lamp   flashes   for  a
  few   seconds   then   goes   off.
This operation is perfectly normal.
driving

Stop & Start requires a 12 V battery with   a   special   specification   and  
t

echnology.
All
  work   on   this   type   of   battery   must  
o

nly   be   done   by   a   CITROËN   dealer   or  
a

  qualified   workshop.
For
  more   information   on   the   12   V  
b

attery,   please   see   the   corresponding  
s

ection.
Operating fault
In the event of a fault with the system, the "ECO OFF"   switch   warning   lamp   flashes   for   a  
f

ew   moments   then   comes   on   continuously.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the  
v

ehicle   may   stall.   All   of   the   instrument   panel  
w

arning   lamps   come   on.   It   is   then   necessary  
t

o   switch   off   the   ignition   and   start   the   engine  
a

gain   using   the   key.
Press
 
this
 
switch
 
to
 
deactivate
 
the
 
system.
The
 
deactivation
 
is
 
confirmed
 
by
 
the
 
switch
 
w

arning
 
lamp
 
coming
 
on
 
accompanied
 
by
 
a
 
m

essage.
Pressing
 
this
 
switch
 
again
 
reactivates
 
the
 
f

unction.
The
 
switch
 
warning
 
lamp
 
goes
 
off,
 
a

ccompanied
 
by
 
a
 
message.
In
 
certain
 
circumstances,
 
such
 
as
 
maintaining
 a
 
comfortable
 
temperature
 
in
 
the
 
passenger
 
c

ompartment,
 
it
 
may
 
be
 
useful
 
to
 
deactivate
 
S

top
 
&
 
Start.
You
 
can
 
request
 
deactivation
 
at
 
any
 
time,
 
once
 
t

he
 
ignition
 
is
 
switched
 
on.
If
 
the
 
engine
 
is
 
in
 
STOP
 
mode,
 
it
 
restarts
 
i

mmediately.
Stop
 
&
 
Start
 
reactivates
 
automatically
 
each
 
t

ime
 
the
 
ignition
 
is
 
switched
 
on.
deactivation / Manual
reactivation
Opening the bonnet
dr

iving on flooded roads
Before
  driving   through   a   flooded   road,  
i

t   is   strongly   recommended   that   you  
d

eactivate   the   Stop   &   Start   system.
For
  more   advice   on   driving,  
p

articularly   on   flooded   roads,   refer   to  
t

he   corresponding   section.
Before
  doing   anything   under   the   bonnet,
 d

eactivate   the   Stop   &   Start   system   to
 a

void   the   risk   of   injury   related   to   an
 a

utomatic   change   to   START   mode.

127
Hill start assist
System which holds your vehicle temporarily (approximately   2   seconds)   when   starting   on   a  
s

lope,   the   time   it   takes   to   move   your   foot   from  
t

he   brake   pedal   to   the   accelerator   pedal.
This
  function   is   only   active   when:
-
 
t
he   vehicle   is   completely   stationary,   with  
y

our   foot   on   the   brake   pedal,
-
 
c
ertain   conditions   on   a   slope   are   met,
-
 
w
ith   the   driver’s   door   closed.
The hill start assist function cannot be
deactivated.
On an ascending slope, with the vehicle
stationary, the vehicle is held momentarily
when you release the brake pedal:
-
 
p
rovided   you   are   in   automated   mode  
(

position
 A)

  or   in   manual   mode   (position   M)
 
w

ith   an   electronic   gearbox.
Do
  not   leave   the   vehicle   while   it   is  
b

eing   held   in   the   hill   start   assist   phase.
If
  you   need   to   leave   the   vehicle   with  
t

he   engine   running,   manually   apply  
t

he   parking   brake   then   ensure   that   the  
p

arking   brake   warning   lamp   is   on   (not  
f

lashing)   in   the   instrument   panel.Operation
On a descending slope, with the vehicle
stationary and reverse gear engaged, the
vehicle is held momentarily when you
release the brake pedal.
Operating fault
If a malfunction of the system occurs, these warning   lamps   come   on.   Contact   a   CITROËN  
d

ealer   or   a   qualified   workshop   to   have   the  
s

ystem   checked.
driving

133
Front parking sensors*Operating fault
In the event of a malfunction of the s
ystem, w hen r everse g ear i s enga ged t

his
 
warning
  lamp   is   displayed   in   the   instrument
 p

anel
 
and/or
  a   message   appears   in   the   screen,
 a

ccompanied   by   an   audible   signal   (short   beep).
Contact
 
a
 
CITROËN   dealer   or   a   qualified
 w

orkshop.In addition to the rear parking sensors, the f ront   parking   sensors   are   triggered   when   an  
o

bstacle   is   detected   in   front   and   the   speed   of  
t

he   vehicle   is   still   below   6   mph   (10   km/h).
The
  front   parking   sensors   are   interrupted   if  
t

he   vehicle   stops   for   more   than   three   seconds  
i

n   for ward   gear,   if   no   further   obstacles   are  
d

etected   or   when   the   speed   of   the   vehicle  
e

xceeds   6   mph   (10   km/h).
The
  sound   emitted   by   the   speaker  
(

front   or   rear)   indicates   whether   the  
o

bstacle   is   in   front   or   behind. In
  bad   weather   or   in   winter,   ensure  
t

hat   the   sensors   are   not   covered   with  
m

ud,   ice   or   snow.   When   reverse   gear   is  
e

ngaged,   an   audible   signal   (long   beep)  
i

ndicates   that   the   sensors   may   be   dirty.
Certain
  sound   sources   (motorcycle,  
l

orry,   pneumatic   drill,   etc.)   may   trigger  
t

he   audible   signals   of   the   parking  
s

ensor   system.
The
  function   will   be   deactivated  
a

utomatically   if   a   trailer   is   being   towed  
o

r   a   bicycle   carrier   is   fitted   (vehicle  
f

itted   with   a   towbar   or   bicycle   carrier  
r

ecommended   by   CITROËN).
*
  Depending   on   version.
deactivation / Activation of
the front and rear parking
sensors
You can activate or deactivate the function using   the   vehicle's   configuration   or   settings  
m

enu.
The
  status   of   the   system   is   memorised   when  
s

witching   off   the   ignition.
driving