buttons Citroen GRAND C4 PICASSO 2017 2.G User Guide

97
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
Dual-zone manual air conditioning with temperature regulation
The air conditioning system only works with the
engine running.
The temperature at the nozzles and vents
is regulated by the system according to the
temperature in the passenger compartment
and the temperature setting.
Press the button for the Air conditioning
menu to display the system controls page.Temperature adjustment
F Press one of these buttons to reduce (blue) or increase
(red) the value.
Air flow adjustment
Press one of these buttons to
increase or decrease the speed of
the air booster fan.
The driver and front passenger can each adjust
the temperature independently.
The value indicated corresponds to a level of
comfort and not to a precise temperature.
It is recommended that a difference between
left and right of more than 3 should be avoided. The air flow symbol (a fan) fills progressively
according to the quantity of air wanted.
By reducing the air flow to minimum, you are
stopping ventilation.
Avoid driving for too long without
ventilation (risk of misting and
deterioration of air quality).
3
Ease of use and comfort

98
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
Air intake / Air recirculation
The intake of exterior air prevents the formation
of mist on the windscreen and side windows.
The recirculation of interior air isolates the
passenger compartment from exterior odours
and smoke.F

P
ress this button to choose
how air enters the passenger
compartment.
Air conditioning On / Off
Switching on
Switching off
The air conditioning does not operate
when the air flow adjustment is set
to
off.F

P
ress this button to activate the
air conditioning system.
Avoid driving for too long with
recirculation of interior air (risk of
misting and deterioration of air quality). This function allows hot or cold air to be
delivered selectively and more quickly. The air conditioning is designed to operate
effectively in all seasons, with the windows closed.
It enables you to:
-
l

ower the temperature, in summer,
-
i

ncrease the effectiveness of the demisting in
winter, above 3°C.
F
P
ress this button again to
deactivate the air conditioning
system.
Air distribution adjustment
These buttons are used to arrange
the distribution of air in the passenger
compartment by combining several air outlets.
Windscreen.
The air distribution can be adapted by using
several buttons: illumination of the button
confirms the presence of fan boosted air in
the direction indicated, the button going off
indicates the absence of fan boosted air in the
direction indicated.
For a uniform distribution of air in the
passenger compartment, the three buttons can
be used simultaneously. Footwells.
Central and side vents.
When the indicator lamp is off, air is taken from
outside the vehicle. When the indicator lamp is
on, air is recirculated from inside the vehicle,
the intake for air outside the vehicle is inhibited. When the indicator lamp is on, the air
conditioning function is activated.
When the indicator lamp is off, the air
conditioning function is deactivated.
Ease of use and comfort

99
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
Dual-zone automatic air conditioning
This air conditioning system operates with
the engine running, but the ventilation and its
controls are available with the ignition on.
Operation of the air conditioning and regulation
of temperature, air flow and air distribution in
the passenger compartment are automatic.Temperature adjustment
1. Driver/passenger side temperature adjustment.
2.
A

ir distribution adjustment.
3.
A

ir flow adjustment.
4.
A

ir intake / air recirculation.
5.
A

ir conditioning On / Off.
6.
A

utomatic mode.
7.
M

ono function.
8.
A

ccess to the secondary page. The driver and front passenger can each set
the temperature independently.
F
P
ress one of these buttons
to increase or decrease the
value.
The value indicated corresponds to a level of
comfort and not to a precise temperature. It is recommended that you avoid a left /right
setting difference of more than 3.
Press the button for the Air conditioning

menu to display the controls for the air
conditioning system.
Air flow adjustment
Avoid driving for too long with the
ventilation off (risk of misting and
deterioration of air quality). F

P
ress one of these buttons to
increase or decrease the speed
of the booster fan.
The air flow symbol (a fan) is filled in
progressively in relation to the quantity of air
requested.
By reducing the air flow to minimum, you are
stopping ventilation.
" - - - " is displayed.
3
Ease of use and comfort

100
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
The air distribution in the passenger
compartment can be adjusted by combining the
use of several vents.
Air distribution adjustment
Windscreen.
Footwells.
Centre and side vents.
The air distribution can be varied by using
more than one button: illumination of the
button indicates that air is distributed in that
direction; no illumination indicates that air is not
distributed in that direction.
In AUTO mode, all three buttons are off. Switching off Switching on
Air conditioning On/Off
The air conditioning is designed to operate
efficiently in all seasons, with the windows
closed.
It allows you:
-

i
n summer, to lower the temperature,
-

i
n winter, above 3 °C, to improve demisting.
Avoid prolonged operation of the air
recirculation function (risk of misting
and of deterioration of the air quality).
When the indicator lamp is off, the intake of
exterior air is active.
When the indicator lamp is on, air recirculation
is activated, the intake of exterior air is
inhibited.
F

P
ress this button to choose
the mode for air entry to the
passenger compartment.
The intake of exterior air avoids misting of the
windscreen and side windows.
Air recirculation prevents exterior odours
and smoke from entering the passenger
compartment.
This function also allows faster heating
or cooling of the air in the passenger
compartment.
Air intake/Air recirculation
F Press this button again to switch
off the air conditioning.
When the indicator lamp is off, the air
conditioning system is off. F

P
ress this button to switch on the
air conditioning.
When the indicator lamp is on, the air
conditioning system is on.
The air conditioning cannot operate when the
air flow is set to off.
Ease of use and comfort

102
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
"Rear" function
F Press this button to activate / deactivate the "Rear" function.
From the secondary page of the Air
conditioning
menu:
This function gives rear passengers access to
the adjustment controls and allows:
-

t

he distribution of air conditioned air to the
vents for the 2
nd row of seats,
-
t
he distribution of ambient air to the vents
for the 3
rd row of seats.
F
T
urn the upper knob to open or close the
rear vent.
F

T
urn the lower knob to reduce (to the left)
or increase (to the right) the air flow.
Settings for passengers
in the 2nd row of seats"Mono" function
The comfort setting for the passenger's side
can be indexed to the driver's comfort setting
(mono-zone).
In the Air conditioning menu:
F

P
ress this button to activate /
deactivate the "Mono" function.
The function is deactivated automatically when
the passenger uses their temperature setting
buttons.
Ease of use and comfort

103
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
Settings for
passengers
in the 3
rd row of seats
F Press the vent cover.
F A djust the flow of air to the two vents using
the four-position knob (off, low, medium,
hi g h).
F

D
irect the vent by turning the cover.
Ventilation with ignition on
function
With the ignition on, you can use the
ventilation system and have access to the Air
conditioning menu to adjust the air flow and
air distribution in the passenger compartment.
This function is available for a few minutes,
depending on the state of charge of the battery
of your vehicle.
This function does not activate the air
conditioning.
You can make use of the residual heat in the
engine to warm the passenger compartment
using the temperature setting buttons.
3
Ease of use and comfort

116
C4-Picasso-II_en_Chap03_ergonomie-confort_ed02-2016
1. Screen power switch
2. Display adjustment buttons
Each headphone set has a switch,
a connection indicator lamp (blue)
and a channel selector (A or B). F
W ith the engine running, connect your
portable system to the RCA connectors
(e.g. with AV1 on the left).
F

P
ress the switch on the control panel, the
indicator lamp comes on and
the AV1 indicator lamps come on.
F

M
ake a long press on the switch, its
indicator lamp flashes in blue.
F

M
ake a long press on the control panel
switch, the pairing with the headphone set
is complete when the blue indicator lamps
on the headphones and on the system are
on continuously.
F

R
epeat the operation for the other
headphone set.
F

P
ress the screen switch if you have a video
source.
F

S
tart playing your portable system.
Operation
The Multimedia system allows the
connection of a third Bluetooth
headphone set, not supplied.
If your seat is in the table position,
position a cover to avoid damaging the
screen.
These covers also conceal each
screen.
F

I

t is possible at any time to modify the
source for the video display (using button 6
or 7 on the control panel: the indicator lamp
for the source selected comes on) as well
as the audio channel (using the selector on
the headphones).
Ease of use and comfort

157
C4-Picasso-II_en_Chap04_conduite_ed02-2016
Switching on / Pause
F Turn thumbwheel 1 to the "LIMIT" position:
the speed limiter mode is selected but is
not switched on (Pause).
F

S
witch the speed limiter back on by
pressing button 4 , if the speed displayed
is suitable (by default, the last speed
programmed).
F

Y
ou can temporarily stop the speed limiter
by pressing button 4 again: the display
confirms that it has been stopped (Pause). You do not have to switch the speed limiter on
in order to set the speed.
Once the function is selected, you can modify
the speed setting by:
-

u
sing buttons 2 and 3, raising or lowering
the speed displayed:
F

b
y successive short presses, to modify
by + or - 1 mph (km/h),
F

b
y a maintained press, to modify in steps
of + or - 5 mph (km/h).
Adjusting the speed limiter
setting
- pressing button 5 :
F t he six speeds memorised are displayed
in the touch screen,
F

p
ress the button corresponding to the
limit speed chosen.
The value is displayed in the instrument panel.
The selection screen closes after a few
moments.
-

b
y pressing button 5 , if your vehicle has
speed limit recognition:
F

t
he speed to memorise is displayed in
the instrument panel,
F
press button 5 again to save the speed.
The value is then displayed in the instrument
panel.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding section.
4
Driving

160
C4-Picasso-II_en_Chap04_conduite_ed02-2016
Exceeding the programmed
speed
If the cruise speed setting is exceeded, the
displayed speed flashes.
The display becomes steady again once the
vehicle returns to the cruise speed setting.
Switching off
F Turn thumbwheel 1 to the "0" position. T
he display of information related to the
cruise control disappears.
Switching on
Once the cruise control is switched on, you
can modify the cruising speed in one of the
following ways:
-

u
sing buttons 2 or 3 :
F

b
y successive short presses, to modify
the speed by + or - 1 mph (km/h),
F

b
y a long press, to modify the speed in
steps of + or - 5 mph (km/h),
-

b
y pressing button 5 :
F

t
he six memorised speeds are displayed
in the touch screen,
F

c
hoose a value: it is displayed in the
instrument panel.
The selection screen closes after a few
moments.
The modification is then accepted.
F

T

urn thumbwheel 1 to the "CRUISE"

position: the cruise control mode is
selected but is paused.
F
P
ress button 2 or 3 : your vehicle's current
speed becomes the cruise speed.
The cruise control is activated (ON).
Modification of the cruise speed
(speed setting)- by pressing button 5 , if your vehicle has
speed limit recognition:
F

t
he speed to memorise is displayed in
the instrument panel,
F
press button 5 again to save the speed.
The value is then displayed in the instrument
panel.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding section.
Pause
You can pause the cruise control at any time
by pressing button 4 : the screen confirms the
pause.
Driving

161
C4-Picasso-II_en_Chap04_conduite_ed02-2016
Flashing of the dashes indicates a fault with the
cruise control.
Have it checked by a CITROËN dealer or a
qualified workshop.
Operating faultWhen the cruise control is switched on,
be careful if you maintain the pressure
on one of the programmed speed
changing buttons: this may result in a
very rapid change in the speed of your
vehicle.
Do not use the cruise control on
slippery roads or in heavy traffic.
On a steep descent, the cruise control
will not be able to prevent the vehicle
from exceeding the programmed speed.
On steep climbs or when towing, the
programmed speed may not be reached
or maintained.
The use of mats not approved by
CITROËN may inter fere with the
operation of the cruise control.
To avoid any risk of jamming of the
pedals:
-
e
nsure that the mat is secured
c o r r e c t l y,
-

n
ever fit one mat on top of another.
4
Driving