door lock DODGE SPRINTER 2008 2.G Owner's Manual

106 Controls in detailOpening and closing
3
Locking the sliding doors and the
rear door
\1
Press lower part
2
of the switch
when the doors are closed.
The indicator lamp in the switch
comes on.
Unlocking the sliding doors and the
rear door
\1
Press lower part
2
of the switch.
The indicator lamp in the switch goes
out.As a standard feature on all vehicles, all
doors lock automatically when a speed
of 9 mph (15 km/h) is reached.
On some vehicles, depending on the
equipment, all doors lock automatically
as soon as the ignition is switched on*.
You can unlock and open a locked door
from the inside at any time.
1To lock / unlock the entire vehicle
2To lock / unlock the sliding doors and
rear door
Automatic locking
N54.25-2917-31
nf_BA.book Page 106 Friday, January 25, 2008 3:53 PM

107 Controls in detail
Opening and closing
3
Activating the automatic locking
function for the entire vehicle
\1
Close all the doors.
\1
Turn the key to position
1 or
2 in the
ignition lock (
\2
page 111).
\1
Press upper part
1
of the switch.
Keep it pressed for approximately
5seconds.
The indicator lamp in the switch
flashes four times.
!
CAUTION
If your vehicle is centrally locked, this
could hinder rescue operations from the
outside in the event of an accident.When the automatic locking when
driving function is activated, there is
a risk of being locked out if the vehi-
cle is pushed or towed.
For this reason, always deactivate
the automatic locking when driving
function:\4
before pushing the vehicle
\4
before having the vehicle towed
\4
if you are only leaving the vehicle
for a brief period
iFor information about different set-
tings, please contact your authorized
Sprinter Dealer.iIf activated, automatic locking is de-
activated if the vehicle is unlocked or
locked using the central locking
switch.
Automatic locking is reactivated af-
ter the ignition is switched off or a
door is opened with the vehicle sta-
tionary.
nf_BA.book Page 107 Friday, January 25, 2008 3:53 PM

108 Controls in detailOpening and closing
3
Deactivating the automatic locking
function for the entire vehicle
\1
Close all the doors.
\1
Turn the key to position
1 or
2 in the
ignition lock (
\2
page 111).
\1
Press upper part
1
of the switch.
Keep it pressed for approximately
5seconds.
The indicator lamp in the switch
flashes twice.
Activating the automatic locking
function for the sliding doors and the
rear door
\1
Close all the doors.
\1
Turn the key to position
1 or
2 in the
ignition lock (
\2
page 111).
\1
Press lower part
2
of the switch.
Keep it pressed for approximately
5seconds.
The indicator lamp in the switch
flashes four times.
Deactivating the automatic locking
when driving function for the sliding
doors and the rear door
\1
Close all the doors.
\1
Turn the key to position
1 or
2 in the
ignition lock (
\2
page 111).
\1
Press lower part
2
of the switch.
Keep it pressed for approximately
5seconds.
The indicator lamp in the switch
flashes twice.
nf_BA.book Page 108 Friday, January 25, 2008 3:53 PM

109 Controls in detail
Opening and closing
3
The partition sliding door is in the parti-
tion between the cab and the load com-
partment.
Operating the partition sliding door
from inside the cab1To close
2To open
3To unlock
\1To open:
turn the key counterclock-
wise
3
.
The sliding door is unlocked.
\1
Slide the sliding door to the right as
far as the stop
2
.
\1To close:
slide the sliding door to the
left until it engages
1
.
The sliding door can be locked using
the key.
Partition sliding door*Warning
G
Make sure that nobody can become
trapped as you close the partition sliding
door.
nf_BA.book Page 109 Friday, January 25, 2008 3:53 PM

110 Controls in detailOpening and closing
3
Operating the partition sliding door
from inside the load compartment1To close
2To open
3To unlock
\1To open:
press the lever to the
right
3
.
The sliding door is unlocked.
\1
Slide the sliding door to the left as far
as the stop
1
.
\1To close:
slide the sliding door to the
right until it engages
2
.
nf_BA.book Page 110 Friday, January 25, 2008 3:53 PM

124 Controls in detailSeats
3
\1
Remove key
1
from partition sliding
door.
\1
Fold seat cushion
2
down or up.
The seat cushion is held in the rele-
vant position.
Warning
G
When folding down the seat cushion, make
sure that nobody can become trapped.The Warning to the co-driver is increased
in the event of sudden steering move-
ments or an accident if there is a key in-
serted in the partition sliding door lock.Remove the key from the partition sliding
door before using the folding seat.
Rear bench seatWarning
G
All release levers on the legs of the rear
bench seat must be parallel to the vehicle
floor. A rear bench seat with 2 seats may
only be installed left-sided.You can obtain information from any au-
thorized Sprinter Dealer.
Continued
Warning (Continued)
G
The integrated seat belt can only offer the
degree of protection for which it is de-
signed if you install the specified rear
bench seats correctly. Therefore, you
must have the rear bench seat with four
seats installed only by a qualified special-
ist workshop, e.g., an authorized Sprinter
Dealer.Keep the seat bench mounting cups in the
vehicle floor free from dirt and foreign ob-
jects. This is the only way to guarantee
that the locking mechanisms will engage
securely.
Continued
nf_BA.book Page 124 Friday, January 25, 2008 3:53 PM

137 Controls in detail
Lighting
3
Standard front interior lighting1To switch on the interior lighting
2Automatic control
3To switch off the interior lighting
Front interior lighting with overhead
control panel*1
To switch the left-hand reading lamp on / off
2To switch the right-hand reading lamp
on / off
3Right-hand reading lamp
4Interior lamp
5To switch automatic control on / off
6To switch the interior lighting on / off
7Left-hand reading lamp
Automatic controlThe front interior lighting (but not the
rear interior lamps) comes on if you:\4
unlock the vehicle
\4
open a door
\4
remove the key from the ignition lock
The front interior lighting switches off
again automatically.
\1To switch off:
press button
5
.
The interior lighting remains off even
if you open a door.
\1To switch on:
press button
5
.
The automatic function is activated. The
interior lighting switches on and off
again automatically.
Front interior lighting
nf_BA.book Page 137 Friday, January 25, 2008 3:53 PM

139 Controls in detail
Lighting
3
Rear interior lamp with switch
1To switch on the rear interior lighting
2To switch off the rear interior lighting
3Automatic control
Switching the convenient rear interi-
or lighting* on/offOn panel vans / crewbuses equipped
with the convenient rear interior lighting,
the rear interior lighting master control
switch is between the steering wheel
and the ignition lock.There is a switch on each rear interior
lamp, which can be used to switch the
lamp concerned on / off separately, re-
gardless of the position of the master
control switch.
iThe rear interior lamps switch off au-
tomatically after 20 minutes if a slid-
ing door or rear door is open.
N83.30-3110-31
nf_BA.book Page 139 Friday, January 25, 2008 3:53 PM

140 Controls in detailLighting
3
Rear interior lighting master control
switch
1To switch on the rear interior lighting
2Automatic control
3To switch off the rear interior lighting\1To switch on:
press upper part
1
of
the switch.
The rear interior lamps are switched
on when the switches on the rear in-
terior lamps (
\2
page 139) are not in
Off
position
2
.
\1To switch off:
press lower part
3
of
the switch.
All rear interior lamps are switched
off regardless of the position of the
switch on the rear interior lamp.
Automatic control
\1To switch on:
set the rear interior
lighting master control switch to
position
2
.
If the switch on the rear interior lamps
(
\2
page 139) is set to automatic control
3
, the rear interior lamps come on
when you:
\4
open a door
\4
unlock the vehicle
iThe rear interior lamps switch off au-
tomatically after 20 minutes, even if
the switches on the rear interior
lamps (
\2
page 139) are in the On po-
sition
1
.
If you wish to reactivate the rear inte-
rior lamps, you must:
\4
open a door
\4
switch on the ignition again
\4
set the rear interior lighting mas-
ter control switch to position
2

again.
nf_BA.book Page 140 Friday, January 25, 2008 3:53 PM

141 Controls in detail
Lighting
3
Load compartment motion detector*On panel vans equipped with a motion
detector in the load compartment, the
rear interior lighting may also switch on
if motion is detected.
The rear interior lighting can be switched
on by the motion detector with a delay of
no more than 4 seconds if:
\4
the switch on the rear interior lamp
(\2
page 139) is set to “automatic
control”
\4
the vehicle is stationary, the hand-
brake is applied and the service
brake is not applied
or
\4
the selector lever is in position
P and
the service brake is not applied
\4
the vehicle has not been locked from
the outside using the key
Warning
G
Motion detectors work with invisible in-
frared beams emitted by LEDs (Light
Emitting Diodes).
Do not view invisible infrared radiation, la-
ser class 1M, directly using optical instru-
ments.
Your eyes could otherwise be injured.
iIf the motion detector detects move-
ment in the load compartment when
the vehicle is stationary, the rear in-
terior lighting switches on for ap-
proximately 2 minutes. If new
movements are detected, the dura-
tion resumes from the beginning and
the rear interior lighting remains
switched on.
iThe motion detector switches off auto-
matically if no change is detected in the
vehicle for several hours, e.g. door
opened, ignition key turned, etc.This prevents the battery from dis-
charging.
nf_BA.book Page 141 Friday, January 25, 2008 3:53 PM