high power FIAT FULLBACK 2016 1.G User Guide

Position lamps
1. When replacing the bulb on the left
side of the vehicle, remove the clip (A)
holding down the washer tank spout
and move the spout towards the rear of
the vehicle.
2. When replacing the bulb on the right
side of the vehicle in case of
petrol-powered vehicles,
diesel-powered vehicles (4D56), remove
the bolt (B) holding down the power
steering fluid reservoir tank and move
the tank towards the rear of the vehicle.3. Turn the bulb socket anticlockwise to
remove it. And remove the bulb from
the socket by pulling out.
4. To install the bulb, perform the
removal steps in reverse.Front turn-signal lamps
Except for vehicles with high
intensity discharge headlamps
1. When replacing the bulb on the left
side of the vehicle, remove the clip (A)
holding down the washer tank spout
and move the spout towards the rear of
the vehicle.
2. When replacing the bulb on the right
side of the vehicle in case of
petrol-powered vehicles,
diesel-powered vehicles (4D56), remove
the bolt (B) holding down the power
steering fluid reservoir tank and move
the tank towards the rear of the vehicle.
A
360AHA103967
11
361AHA103970
362AHA102801
A
363AHA103967
216
IN CASE OF EMERGENCY

3. Turn the bulb socket anticlockwise to
remove it. And remove the bulb from
the socket by turning it anticlockwise
while pressing in.
3. To install the bulb, perform the
removal steps in reverse.Vehicles with high intensity
discharge headlamps
1. When replacing the bulb on the left
side of the vehicle, remove the clip (A)
holding down the washer tank spout
and move the spout towards the rear of
the vehicle.
2. When replacing the bulb on the right
side of the vehicle in case of
petrol-powered vehicles,
diesel-powered vehicles (4D56), remove
the bolt (B) holding down the power
steering fluid reservoir tank and move
the tank towards the rear of the vehicle.3. Turn the bulb socket anticlockwise to
remove it. And remove the bulb from
the socket by turning it anticlockwise
while pressing in.
3. To install the bulb, perform the
removal steps in reverse.
11
364AHA103970
365AHA102814
A
366AHA103967
11
367AHA103970
368AHA102827
217

Glove box lamp
Have the glove box lamp bulb replaced
at a Fiat dealership.
WARNING
299)Bulbs are extremely hot immediately
after being turned off. When replacing a
bulb, wait for it to cool sufficiently before
touching it. You could otherwise be burnt.
300)Handle halogen lamp bulb with care.
The gas inside halogen lamp bulb is highly
pressurized, so dropping, knocking, or
scratching a halogen lamp bulb can cause
it to shatter.
301)Never hold the halogen lamp bulb
with a bare hand, dirty glove, etc. The oil
from your hand could cause the bulb to
break the next time the headlamps are
operated. If the glass surface is dirty, it
must be cleaned with alcohol, paint thinner,
etc., and refit it after drying it thoroughly.302)Always consult a specialist when
repairing or replacing the bulbs of high
intensity discharge headlamps. This is
because the power circuit, bulbs and
electrodes generate a high voltage that
could cause an electric shock.
303)Modifications or repairs to the electric
system that are not carried out properly or
do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
304)Only replace bulbs when the engine is
off. Also ensure that the engine is cold, to
prevent the risk of burns.
387AHZ101043
222
IN CASE OF EMERGENCY

Fluid type
Brake fluid conforming to DOT 3 or
DOT 4 should be used. The reservoir
cap must be fully tightened to avoid
contamination from foreign matter or
moisture. DO NOT ALLOW
PETROLEUM- BASED FLUID TO
CONTACT, MIX WITH, OR OTHERWISE
CONTAMINATE THE BRAKE FLUID.
SEAL DAMAGE WILL RESULT.
323)
WARNING
323)Clutch fluid is poisonous and highly
corrosive. In the event of accidental
contact, immediately wash the affected
parts with water and mild soap. Then rinse
thoroughly. Call a doctor immediately if
swallowed.
POWER STEERING
FLUID
324)
3)
To check the fluid level
Check the fluid level in the reservoir
while the engine is idling. Check to
make certain that the power steering
fluid level is always between the “MAX”
and “MIN” level markings on the fluid
reservoir and refill the fluid, if necessary.
WARNING
324)Prevent power steering fluid from
coming into contact with hot engine parts:
it is flammable.
IMPORTANT
3)Power steering fluid consumption is
extremely low; if another top-up is required
after only a short period of time, have the
system checked for leaks at a Fiat
Dealership.
MAX
MIN
399AHA102582
251

ItemDiesel-powered vehicles
4D56
Without intercoolerWith intercooler
Not for vehicles with 15 inch tyreWith intercooler
Vehicles with 15 inch tyre
Engine models 4D56
No. of cylinders 4 in line
Total displacement 2,477 cc
Bore91.1 mm
Stroke95.0 mm
Camshaft Double overhead
Mixture preparation Electronic direct injection
Maximum output (EEC net) 81 kW/4,000 r/min100 kW/4,000 r/min
131 kW/4,000 r/min
(1)94 kW/4,000 r/min
Maximum torque (EEC net)200 Nm/1,500
–3,500 r/min324 Nm/2,000 r/min
400 Nm/2,000 r/min
(1)240 Nm/1,500 – 3,500 r/min
(1) Vehicles with high power engine
344)
WARNING
344)Modifications or repairs to the fuel supply system that are not carried out properly or do not take the system’s technical specifications
into account may cause malfunctions leading to a risk of fire.
270
TECHNICAL SPECIFICATIONS

Double Cab
Petrol-powered vehicles
Item 2WD 2WD Hi-Rider 4WD
Maximum speed 169 km/h 161 km/h 161 km/h
Diesel-powered vehicles (4D56)
Item 2WD 2WD Hi-Rider4WD
Without intercooler4WD
With intercooler
M/T A/T
Maximum
speed152 km/h167 km/h
169 km/h(2)147 km/h167 km/h
179 km/h(2)165 km/h
175 km/h(2)
(2) Vehicles with high power engine
Diesel-powered vehicles (4N15)
Item 2WD Hi-Rider4WD
Without wide fender4WD
With wide fender
M/T A/T
Maximum
speed169 km/h 169 km/h174 km/h
179 km/h(2)173 km/h
177 km/h(2)
(2) Vehicles with high power engine
280
TECHNICAL SPECIFICATIONS

4WD
M/T
ItemVehicles without wide fender Vehicles with wide fender
LHD RHD LHD RHD
Kerb weightWithout optional
parts1,775 kg
1,805 kg
(1)1,775 kg1,820 kg
1,835 kg(4)
1,820 kg
1,835 kg(4)1,865 kg(2)
With full optional
parts1,855 kg
1,920 kg(1)1,890 kg(2)1,880 kg1,950 kg
1,980 kg(4)
1,955 kg
1,960 kg(4)1,900 kg(2)
Maximum gross vehicle weight 2,850 kg2,850 kg
2,870 kg(4)2,880 kg(2)
Maximum axle
weightFront 1,260 kg 1,260 kg
Rear 1,840 kg 1,840 kg
Seating
capacity5 persons
6 persons
(3)
(1) Vehicles with intecooler
(4) Vehicles with high power engine
(2) Vehicles for specific Countries
(3) Vehicles equipped with bench seat
286
TECHNICAL SPECIFICATIONS

4WD
A/T
Item LHD RHD
Kerb weightWithout optional parts1,830 kg
1,850 kg
(4)1,820 kg(2)
1,830 kg
1,850 kg(4)
With full optional parts1,960 kg
1,980 kg(4)1,905 kg(2)
1,965 kg
1,970 kg(4)
Maximum gross vehicle weight2,850 kg
2,900 kg
Maximum axle weightFront 1,260 kg
Rear 1,840 kg
Seating capacity5 persons
6 persons
(3)
(4) Vehicles with high power engine
(2) Vehicles for specific Countries
(3) Vehicles equipped with bench seat
287

Item 2WD Hi-RiderM/T
A/T
Vehicles without wide
fenderVehicles with wide
fender
Kerb weightWithout optional
parts1,725 kg 1,830 kg1,835 kg
1,840 kg(1)1,840 kg
1,845 kg(3)
With full optional
parts1,815 kg 1,925 kg 1,955 kg1,955 kg
1,960 kg(4)
Maximum gross vehicle weight 2,760 kg 2,840 kg 2,870 kg 2,870 kg
Maximum axle
weightFront 1,260 kg
Rear 1,840 kg
Seating
capacity5 persons
6 persons
(2)
(1) LHD
(3) Vehicles with high power engine (LHD)
(4) Vehicles with high power engine
(2) Vehicles equipped with bench seat
288
TECHNICAL SPECIFICATIONS

ELECTRICAL SYSTEM
Item Petrol-powered vehicles
Voltage 12 V
Battery Type (JIS) 55D23L 60Ah
Alternator capacity 90 A
Spark plug typeNGK BKR5E-11
DENSO K16PR-U11
CHAMPION RC10YC4
Diesel-powered vehicles
4D56
2WD
Item All Markets Vehicles for specific Markets
Voltage12 V
Battery Type (JIS)80D26L 70Ah
95D31L 88Ah
(1) (2)95D31L 88Ah
Alternator capacity 90 A
Spark plug typeNGK —
DENSO —
CHAMPION —
(1) Optional
(2) Vehicles with high power engine
289