change time FIAT ULYSSE 2009 2.G Connect NavPlus Manual

The car is equipped with a CONNECT Nav+ system designed according to the specific features of the passen-
ger compartment with a customised design which matches the style of the dashboard.
The system is installed in an ergonomically convenient position for the driver and the passenger; the graphic on
the front panel helps to quickly identify the controls and makes them easier to use.
In order to deter thefts, the device is provided with a special protection system and may only be used on the
car where it was originally fitted.
The interface language of the system is that in use in the country where the car is registered. Contact a Fiat
Dealership to change the language or the voice (male/female) at a later time.
Read the following instructions carefully and keep the instructions at hand at all times (e.g. in the oddment
compartment).
Enjoy.

11
Key Short press (less than 1 second)Long press (over 1 second)
22BND AST
23TA/PTY
24DARK
25MODE
26
27MEMO
28˜
29
30SRC
31
32÷
33 MEMO
Automatic station store (in FMAST band).
PTY (Type Program): activate search filter
according to broadcasting station category.
–
–
Navigation mode: repeat last voice message
(supplied by system).
–
–
–
–
–
–
– Select frequency band FM1 – FM2 – FMAST
(autostore) – AM.
TA (Traffic Announcements): automatic
reception of traffic announcements.
Press once: partial dimming of display.
Press twice: dimming of display.
Press three times: normal display brightness.
Change current display.
Voice controls
Anticlockwise:
Radio mode: previous preset station.
CD changer mode: select previous CD.
Radio mode: manual tuning next station.
CD mode: select next track
Audio section: volume up.
Pressed with button 31: mute function
Select mode: radio, CD, CD changer.
Audio section: volume down.
Pressed with button 29: mute function
Radio mode: manual tuning previous station.
CD mode: select previous track
Clockwise.
Radio mode: next preset station.
CD changer mode: select next CD

14
fig. 2
F0B1005g
SWITCHING THE SYSTEM
ON/OFF
The system will be switched on when
the key is switched to the Mposition.
The system will be switched off when
the key is turned to the Sposition.
With the key at S, press knob (4) to
operate the system for 20 minutes only
to protect the battery charge.
ANTITHEFT PROTECTION
The CONNECT Nav+ system is
provided with an automatic antitheft
system which does not need to be
operated by the user. CONFIGURATION
Press MENU(18); turn and press
the knob (16 – 40) to select the
CONFIGURATION function - fig. 2.
The following settings may be acces-
sed:
– “Display configuration”: turn and
press the knob (16 – 40) to select and
confirm. This function is used to chan-
ge the display colour, adjust brightness,
set the date and time and set the unit
of measure.
– “Sound”: turn and press the knob
(16 – 40) to select and confirm. This
function is used to adjust the voice
control volume, set the voice synthe-
sis parameters and switch the auxiliary
input (RCA socket) located in the
oddment compartment on and off.– “Select language”: turn and press
the knob (16 – 40) to select and con-
firm. This function is used to select the
required language.
– “Define vehicle parameters”: turn
and press the knob (16 – 40) to select
and confirm. This function may be
used switch some vehicle parameters
on and off. The parameters change ac-
cording to the version (e.g. parking
sensors, etc.).