jump cable FORD F750 2008 11.G Owners Manual

FORD F750 2008 11.G Owners Manual F750 2008 11.G FORD FORD https://www.carmanualsonline.info/img/11/5074/w960_5074-0.png FORD F750 2008 11.G Owners Manual

Page 135 of 273

FORD F750 2008 11.G Owners Manual GETTING ROADSIDE ASSISTANCE
To fully assist you should you have a vehicle concern, Ford offers a
complimentary roadside assistance program. This program is separate
from the New Vehicle Limited Warran

Page 143 of 273

FORD F750 2008 11.G Owners Manual for the engine control module. Refer toAutomatic transmission
operationin theDrivingchapter andBatteryin theMaintenance and
Specificationschapter for more information.
JUMP STARTING
The gases around t

Page 144 of 273

FORD F750 2008 11.G Owners Manual Connecting the jumper cables
1. Connect the positive (+) jumper cable to the positive (+) terminal of
the discharged battery.
Note:In the illustrations,lightning boltsare used to designate the
assisti

Page 145 of 273

FORD F750 2008 11.G Owners Manual 4. Make the final connection of the negative (-) cable to an exposed
metal part of the stalled vehicle’s engine, away from the battery and the
carburetor/fuel injection system.Do notuse fuel lines,

Page 146 of 273

FORD F750 2008 11.G Owners Manual Removing the jumper cables
Remove the jumper cables in the reverse order that they were
connected.
1. Remove the jumper cable from thegroundmetal surface.
Note:In the illustrations,lightning boltsare

Page 147 of 273

FORD F750 2008 11.G Owners Manual 4. Remove the jumper cable from the positive (+) terminal of the
disabled vehicle’s battery.
After the disabled vehicle has been started and the jumper cables
removed, allow it to idle for several m

Page 194 of 273

FORD F750 2008 11.G Owners Manual such as the fuel sender, cranking motor, alternator and feed-through
studs should be cleaned and re-coated with a lubricant sealing grease
such as Motorcraft Silicone Brake Caliper Grease and Dielecti