radio GENESIS G90 2023 User Guide
[x] Cancel search | Manufacturer: GENESIS, Model Year: 2023, Model line: G90, Model: GENESIS G90 2023Pages: 676, PDF Size: 14.16 MB
Page 411 of 676
7-22
Driver Assistance System
[ You are continuously driving in a circle
[ The vehicle in front has an unusual
shape
[ The vehicle in front is driving uphill or
downhill
[ The pedestrian or cyclist is not
fully detected, for example, if the
pedestrian is leaning over or is not
fully walking upright
[ The pedestrian or cyclist is wearing
clothing or equipment that makes it
difficult to detect
[ Rear wheel steering system (if
equipped) is disabled
ORS071178
The illustration above shows the image
the front view camera and front radar
are capable of detecting as a vehicle,
powered two-wheeler, pedestrian and
cyclist.
[ The pedestrian or cyclist in front is
moving very quickly
[ The pedestrian or cyclist in front is
short or is posing a low posture
[ The pedestrian or cyclist in front has
impaired mobility
[ The pedestrian or cyclist in front is
moving intersected with the driving
direction [ There is a group of pedestrians,
cyclists or a large crowd in front
[ The pedestrian or cyclist is wearing
clothing that easily blends into the
background, making it difficult to
detect
[ The pedestrian or cyclist is difficult to
distinguish from the similarly shaped
structure in the surroundings
[ You are driving by a pedestrian,
cyclist, traffic signs, structures, etc.,
near the intersection
[ Driving in a parking lot
[ Driving through a tollgate,
construction area, unpaved road,
partial paved road, uneven road,
speed bumps, etc.
[ Driving on an incline road, curved
road, etc.
[ Driving through a roadside with trees
or streetlights
[ The adverse road conditions cause
excessive vehicle vibrations while
driving
[ Your vehicle height is low or high
due to heavy loads, abnormal tire
pressure, etc.
[ Driving through a narrow road where
trees or grass are overgrown
[ There is interference by
electromagnetic waves, such as
driving in an area with strong radio
waves or electrical noise
Page 478 of 676
7-89
07
[ The vehicle in front is bent out of
shape
[ The front vehicle’s speed is fast or
slow
[ With a vehicle in front, your vehicle
changes lane at low speed
[ The vehicle in front is covered with
snow
[ Unstable driving
[ You are on a roundabout and the
vehicle in front is not detected
[ You are continuously driving in a circle
[ Driving in a parking lot
[ Driving through a construction area,
unpaved road, partial paved road,
uneven road, speed bumps, etc.
[ Driving on an incline road, curved
road, etc.
[ Driving through a roadside with trees
or streetlights
[ The adverse road conditions cause
excessive vehicle vibrations while
driving
[ Your vehicle height is low or high
due to heavy loads, abnormal tire
pressure, etc.
[ Driving through a narrow road where
trees or grass are overgrown
[ There is interference by
electromagnetic waves, such as
driving in an area with strong radio
waves or electrical noise
[ Rear wheel steering system (if
equipped) is disabled[ Driving on a curved road
ORS071061
On curves, Smart Cruise Control may
not detect a vehicle in the same lane,
and may accelerate to the set speed.
Also, vehicle speed may rapidly
decrease when the vehicle ahead is
detected suddenly.
Select the appropriate set speed on
curves and apply the brake pedal or
accelerator pedal according to the
road and driving conditions ahead.
ORS071064
Your vehicle speed can be reduced
due to a vehicle in the adjacent lane.
Apply the accelerator pedal and select
the appropriate set speed. Check
to be sure that the road conditions
permit safe operation of Smart Cruise
Control.
Page 544 of 676
7-155
07
Information
[ Check that all smart keys are outside
the vehicle when using Remote
2 S H U D W L R Q I X Q F W L R Q
[ 5 H P R W H 2 S H U D W L R Q I X Q F W L R Q Z L O O R S H U D W H
only when the smart key is within
I W P I U R P W K H Y H K L F O H , I W K H U H
is no vehicle movement even when
the Forward or Backward button is
S U H V V H G R Q W K H V P D U W N H \ F K H F N W K H
G L V W D Q F H W R W K H Y H K L F O H D Q G S U H V V W K H
button again.
[ The detecting range of the smart
N H \ P D \ Y D U \ G H S H Q G L Q J R Q W K H
surroundings that are affected by radio
waves such as transmission tower,
broadcast station, etc.
[ When remotely moving forward using
P H W K R G L W L V U H F R J Q L ] H G D V D Q H [ L W
V L W X D W L R Q D Q G W K H Y H K L F O H P R Y H V
I W P W R F K H F N I R U S D U N L Q J O L Q H V
S H G H V W U L D Q V D Q L P D O V R U R E M H F W V D U R X Q G
the vehicle. After confirmation, the
steering wheel is controlled according
to the condition ahead.
[ When remotely moving forward
using method (2), it is recognized as a
S D U N L Q J V L W X D W L R Q D Q G Z L O O L P P H G L D W H O \
control the steering wheel according
to the condition ahead to assist with
H Q W H U L Q J W K H S D U N L Q J V S D F H D Q G D O L J Q L Q J
W K H Y H K L F O H + R Z H Y H U S H U I R U P D Q F H P D \
U H G X F H G H S H Q G L Q J R Q W K H S D U N L Q J O L Q H V
S H G H V W U L D Q V D Q L P D O V V K D S H R I R E M H F W V
location, etc., around the vehicle.
[ For moving remotely backward, both
P H W K R G D Q G D O L J Q V W K H V W H H U L Q J
wheel first, and then will only move the
vehicle straight.
[ When remotely moving forward or
E D F N Z D U G L V F R P S O H W H G W K H Y H K L F O H
Z L O O D X W R P D W L F D O O \ V K L I W W R 3 3 D U N
D Q G H Q J D J H ( 3 % ( O H F W U R Q L F 3 D U N L Q J
Brake).
CAUTION
[ When using Remote Operation
I X Q F W L R Q P D N H V X U H W K D W D O O
S D V V H Q J H U V K D Y H J R W W H Q R X W R I W K H
Y H K L F O H
[ , I W K H Y H K L F O HT V E D W W H U \ L V G L V F K D U J H G
R U 5 H P R W H 6 P D U W 3 D U N L Q J $ V V L V W
malfunctions when parked in a
Q D U U R Z S D U N L Q J V S D F H 5 H P R W H
2 S H U D W L R Q I X Q F W L R Q Z L O O Q R W R S H U D W H
$ O Z D \ V S D U N \ R X U Y H K L F O H L Q D V S D F H
Z L G H H Q R X J K I R U \ R X W R J H W L Q R U R X W
R I \ R X U Y H K L F O H
[ ' H S H Q G L Q J R Q W K H S D U N L Q J V S D F H
\ R X P D \ Q R W E H D E O H W R H [ L W I U R P W K H
V S D F H \ R X K D Y H H Q W H U H G E \ X V L Q J
5 H P R W H 2 S H U D W L R Q I X Q F W L R Q
[ $ I W H U S D U N L Q J W K H V X U U R X Q G L Q J P D \
F K D Q J H G X H W R W K H P R Y H P H Q W R I
V X U U R X Q G L Q J Y H K L F O H V , I W K L V R F F X U V
5 H P R W H 2 S H U D W L R Q I X Q F W L R Q P D \ Q R W
R S H U D W H
[ % H I R U H O H D Y L Q J W K H Y H K L F O H F O R V H
Z L Q G R Z V D Q G V X Q U R R I V D Q G P D N H
V X U H W K H H Q J L Q H L V R I I E H I R U H O R F N L Q J
W K H G R R U V
Page 551 of 676
7-162
Driver Assistance System
5 H P R W H 6 P D U W 3 D U N L Q J
ORS071164L
(1) Shift the gear to P (Park), get out
of the vehicle with the smart key,
and close all doors.
(2) Press and hold one of the Forward
(
) or Backward () button on
the smart key. Remote Smart
Parking Assist will automatically
control the steering wheel, vehicle
speed and gearshift.
(3) While Remote Smart Parking
function is operating, if you do
not hold down the Forward (
) or
Backward () button, the vehicle
will stop and function control
will pause. The function will start
operating again when the button is
pressed and held again.
(4) When the vehicle reaches the
target parking position, a message
will appear on the infotainment
system screen to inform you that
parking is complete. The vehicle
will automatically shift to P (Park),
engage EPB (Electronic Parking
Brake) and the engine will turn off.
(5) If you need to change the vehicle’s
position or location, manually
complete parking your vehicle.
Information
[ : K H Q R S H U D W L Q J 5 H P R W H 6 P D U W
3 D U N L Q J I X Q F W L R Q P D N H V X U H D O O V P D U W
keys are outside of the vehicle.
[ 5 H P R W H 6 P D U W 3 D U N L Q J I X Q F W L R Q Z L O O
R S H U D W H R Q O \ Z K H Q W K H V P D U W N H \ L V
Z L W K L Q I W P I U R P W K H Y H K L F O H , I
there is no vehicle movement even when
the Remote Forward or Backward
E X W W R Q L V S U H V V H G R Q W K H V P D U W N H \
check the distance to the vehicle and
S U H V V W K H E X W W R Q D J D L Q
[ The detecting range of the smart
N H \ P D \ Y D U \ G H S H Q G L Q J R Q W K H
surroundings that are affected by radio
waves such as transmission tower,
broadcast station, etc.
[ 7 K H S D U N L Q J O R F D W L R Q L Q G L F D W R U L V
G L V S O D \ H G R Q 6 X U U R X Q G 9 L H Z 0 R Q L W R U
V F U H H Q D Q G L V G L V S O D \ H G X Q W L O W K H
Y H K L F O H H Q W H U V W K H S D U N L Q J V S D F H I R U W K H
I L U V W W L P H E \ 5 H P R W H 6 P D U W 3 D U N L Q J
function.
[ ' H S H Q G L Q J R Q S D U N L Q J H Q Y L U R Q P H Q W V
L I W K H Y H K L F O H L V V W R S S H G E \ D V W R S S H U
S D U N L Q J P D \ E H F R P S O H W H G
CAUTION
[ : K H Q X V L Q J 5 H P R W H 6 P D U W 3 D U N L Q J
I X Q F W L R Q P D N H V X U H W K D W D O O
S D V V H Q J H U V K D Y H J R W W H Q R X W R I W K H
Y H K L F O H
[ After ending or turning off Remote
6 P D U W 3 D U N L Q J I X Q F W L R Q E H I R U H
O H D Y L Q J W K H Y H K L F O H F O R V H Z L Q G R Z V
D Q G V X Q U R R I V D Q G P D N H V X U H W K H
H Q J L Q H L V R I I E H I R U H O R F N L Q J W K H
G R R U V
Page 567 of 676
7-178
Driver Assistance System
Front Corner Radar/Rear Corner
Radar
The radio frequency components
complies:
- For USA
OANATEL352
- For Canada
OANATEL353
Page 572 of 676
8-5
08
Jump Starting Procedure
Information
Your vehicle has a battery in the luggage
compartment, but when you jump start
your vehicle, use the jumper terminal in
the engine compartment.
1. Position the vehicles close enough
that the jumper cables will reach, but
do not allow the vehicles to touch.
2. Avoid fans or any moving parts in the
engine compartment at all times, even
when the vehicles are turned off.
3. Turn off all electrical devices such as
radios, lights, air conditioning, etc.
Put the vehicles in P (Park) and set the
parking brake. Turn both vehicles OFF.
4. Open the engine hood.
ORS081020ORS081020
A : Negative (-) Terminal,
B : Positive (+) Terminal
5. Remove the engine compartment fuse
box cover.
CAUTION
Before jump starting, make sure to
correctly identify the positive (+) and
negative (-) terminals to avoid reverse
polarity connections.
ORS082003NORS082003N
6. Connect the jumper cables in
the exact sequence shown in the
illustration. First connect one jumper
cable to the red, positive (+) jumper
terminal of your vehicle M.
7. Connect the other end of the jumper
cable to the red, positive (+) battery/
jumper terminal of the assisting
vehicle N.
8. Connect the second jumper cable to
the black, negative (-) battery/jumper
terminal of the assisting vehicle O.
9. Connect the other end of the second
jumper cable to the black, negative (-)
chassis ground of your vehicle P.
Do not allow the jumper cables to
contact anything except the correct
battery or jumper terminals or the
correct ground. Do not lean over the
battery when making connections.
WARNING
Do not connect the jumper cable to
the negative (-) jumper terminal of the
discharged battery. A spark could cause
the battery to explode and lead to a
personal injury or vehicle damage.
008_RS4_HMA.indd 8-52022-04-18 3:48:05
Page 578 of 676
8-11
08
TPMS (Tire Pressure
Monitoring System)
Malfunction Indicator
The TPMS Malfunction Indicator
will illuminate after it blinks for
approximately one minute when there
is a problem with the Tire Pressure
Monitoring System.
Have the system checked by an
authorized retailer of Genesis Branded
products as soon as possible.
NOTICE
If there is a malfunction with the TPMS,
the Low Tire Pressure Position Telltale
will not be displayed even though the
vehicle has an under-inflated tire.
NOTICE
The TPMS Malfunction Indicator may
illuminate after blinking for one minute
if the vehicle is near electric power
supply cables or radio transmitters
such as police stations, government
and public offices, broadcasting
stations, military installations, airports,
transmitting towers, etc.
Additionally, the TPMS Malfunction
Indicator may illuminate if snow chains
are used or electronic devices such as
computers, chargers, remote starters,
navigation, etc. This may interfere with
normal operation of the TPMS.
Changing a Tire with TPMS
If you have a flat tire, the Low Tire
Pressure and Position telltales will come
on. Have the flat tire repaired by an
authorized retailer of Genesis Branded
products as soon as possible or replace
the flat tire with the spare tire.
NOTICE
It is recommended that you do not use a
puncture-repairing agent not approved
by an authorized retailer of Genesis
Branded products to repair and/or
inflate a low pressure tire. Tire sealant
not approved by an authorized retailer
of Genesis Branded products may
damage the tire pressure sensor.
The spare tire does not come with a
tire pressure monitoring sensor. When
the low pressure tire or the flat tire is
replaced with the spare tire, the Low
Tire Pressure LCD position indicator will
remain on. Also, the TPMS Malfunction
Indicator will illuminate after blinking
for one minute if the vehicle is driven
at speed above 15.5 mph (25 km/h) for
approximately 20 minutes.
Once the original wheel equipped with
a tire pressure monitoring sensor is
reinflated to the recommended pressure
and reinstalled on the vehicle, the
Low Tire Pressure Telltale and TPMS
Malfunction Indicator will go off within a
few minutes of driving.
008_RS4_HMA.indd 8-112022-04-18 3:48:07