turn signal HONDA INSIGHT 2004 1.G Owners Manual
[x] Cancel search | Manufacturer: HONDA, Model Year: 2004, Model line: INSIGHT, Model: HONDA INSIGHT 2004 1.GPages: 218, PDF Size: 2.59 MB
Page 6 of 218
Î
Î
Your Vehicle at a Glance
3
U.S. modelMIRROR CONTROLS
POWER WINDOW
SWITCHES HEADLIGHTS/TURN SIGNALS HORN REAR WINDOW DEFOGGER
WINDSHIELD WIPERS/WASHERS
ECON BUTTON
DRIVING MODE BUTTONS (CVT)
(P.
66)
(P. 65)
(P.54) (P.
52)
(P.113) (P.
53)
(P.73)
HAZARD WARNING
BUTTON(P. 55)
AUDIO SYSTEM
(P. 78)
(P. 56)
Page 42 of 218
This section gives inf ormation about
the controls and displays that
contribute to the daily operation of
your Honda. All the essential
controls are within easy reach............................
Control Locations .40
............................
Instrument Panel .41
..........
Instrument Panel Indicators . 42
.............................................
Gauges .46
..................................
Fuel Gauge .47
...................
Temperature Gauge . 47
.....................................
Odometer .47
..............
Display Change Button . 47
.................
Current Fuel Mileage . 48
.................................
Trip Meters .48
................................
Trip Mileage .48
Segment Distance and Fuel ....................................
Mileage .49
................
Lif etime Fuel Mileage . 49
Turning Of f the Mileage ....................................
Displays .50
..................
Battery Level Gauge . 51
................
Charge/Assist Gauge . 51
Controls Near the Steering ...........................................
Wheel .52
.
Windshield Wipers and Washers . 53
...........
Turn Signal and Headlights . 54
........
Instrument Panel Brightness . 55
.............
Hazard Warning Button . 55
.............
Rear Window Def ogger . 56
...............................
Keys and Locks .57 ........................
Immobilizer System .58
................................
Ignition Switch .59
......................................
Door Locks .60
................................................
Hatch .60
.......................
Remote Transmitter .62
.................................................
Seats .64
..............................
Power Windows .65
.............................................
Mirrors .66
.................................
Parking Brake .67
...........
Interior Convenience Items . 68
.................................
Storage Box .69
.........................
Beverage Holder .69
....................................
Glove Box .69
...........
Accessory Power Socket . 69
.................................
Interior Lights .70
Instruments and Controls
Inst rument s and Cont rols39
Page 44 of 218
Î
Î
Î
Î Shif t Lever Position Indicators on CVT model (P. ) The U.S. instrument panel is shown. Dif f erences f or the Canadian models are noted in the text.
1:
2 : 111
Instrument Panel
Inst rument s and Cont rols
Manual T ransmission shown
41
SUPPLEMENTAL RESTRAINT SYSTEM INDICATOR
ELECTRIC POWER STEERING INDICATOR
LOW OIL PRESSURE INDICATOR
MALFUNCTION INDICATOR LAMP
AUTO IDLE STOP INDICATOR
IMMOBILIZER SYSTEM INDICATOR CHARGING SYSTEM INDICATORMAINTENANCE
REQUIRED INDICATOR
LOW FUEL INDICATOR IMA SYSTEM INDICATOR
HIGH BEAM INDICATOR
TURN SIGNAL AND HAZARD WARNING INDICATORS
DOOR AND HATCH OPEN INDICATOR
SEAT BELT REMINDER INDICATOR
(P.
42)
(P. 42)
(P. 44)
(P. 42, 177)
(P. 178)
(P. 110, 117) (P.
43)
(P. 44)
(P.43)
PARKING BRAKE AND BRAKE SYSTEM INDICATOR
(P.44)
ANTI-LOCK BRAKE SYSTEM (ABS)
INDICATOR (P.
43)
SHIFT UP/SHIFT DOWN
INDICATORS (P.109)
(P. 42)
(P. 44)
(P.
45)
(P. 42, 178)
(P. 44)
1
2
Page 46 of 218
This indicator has two f unctions:This indicator comes on when you
turn the ignition switch to ON (II).
It is a reminder to check the
parking brake. Driving with the
parking brake not f ully released
can damage the brakes and tires.
If it remains lit af ter you f ully
release the parking brake while
the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more inf ormation, see
page . See page .
The lef t or right turn signal indicator
blinks when you signal a lane change
or turn. If the indicators do not blink
or blink rapidly, it usually means one
of the turn signal bulbs is burned out
(see page ). Replace the bulb as
soon as possible, since other drivers
cannot see that you are signaling.
WhenyouturnontheHazard
Warning button, both turn signal
indicators blink. All turn signals on
the outside of the vehicle should
flash. This indicator normally comes on f or
a f ew seconds when you turn the
ignition switch to ON (II), and when
the ignition switch is turned to
START (III). If it comes on at any
other time, there is a problem in the
ABS. If this happens, have your
vehicle checked by your Honda
dealer. With this indicator on, your
vehicle still has normal braking
ability but no anti-lock. For more
inf ormation, see page .
2. 1.
180 178
146 120
Instrument Panel Indicators
Inst rument s and Cont rols
Parking Brake and Brake System
IndicatorMalf unction Indicator
Lamp
Turn Signal and Hazard Warning
Indicators Anti-lock Brake System
(A BS) Indicator
43
U.S. Canada
Page 55 of 218
Î
Î
To use the horn, press the pad around the ‘‘H’’ logo.
:
Controls Near the Steering Wheel
Inst rument s and Cont rols52
WINDSHIELD
WIPERS/WASHERS
HORN ECON BUTTON
POWER WINDOW SWITCHES
HEADLIGHTS/TURN SIGNALS DRIVING MODE BUTTONS
(CVT model only)REAR WINDOW
DEFOGGER
MIRROR CONTROLS
AUDIO SYSTEM
(P.
65) (P.66)
(P.53)
(P.73) (P.
55)
HAZARD WARNING BUTTON
(P.78)
(P. 56)
(P. 113)
(P.
54)
Page 57 of 218
µµ µ
Push down on the
lef t lever to signal a lef t turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to
center when you release it or
complete a turn.
Turn Signal
Of f
Parking and interior lights
Headlight on
High beams
Flashhighbeams Rotating the
switch on the lef t lever to the
‘‘ ’’ position turns on the parking
lights, taillights, side-marker lights,
and rear license plate light. Turning
the switch to the ‘‘ ’’ position
turns on the headlights. If you leave
the lights on with the key removed
f rom the ignition switch, you will
hear a reminder tone when you open
the driver’s door. To turn on, push
the lever f orward until you hear a
click. The blue high beam indicator
will come on (see page ). Pull it
back to return to low beams.
The headlights revert to normal
operation when you turn them on
with the switch. With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
of f , even if you set the parking brake. To f lash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
1.
2.
3.
4.
5.
6. 44
Turn Signal
Headlights On High Beams
(Canadian Models) Daytime Running L ights
Turn Signal and Headlights
Inst rument s and Cont rols54
Page 58 of 218
´µ´µ
µ´
The buttons in the lower left corner
of the instrument panel adjust the
brightness of the display in six steps.
Push the or button five times
to see the f ull range. Thedisplaydimswhentheparking
lights or headlights are turned on.
Adjust the brightness to the desired
level with the headlight switch of f ,
and also with the headlight switch on.
Both settings will remain at those
levels until you change them.
With the headlight switch on, you
can switch the display to f ull daytime
brightness by pushing and holding
the button. Push the button to
return the display to the original
brightness.
Push the button to the right of the
center vents to turn on the hazard
warning lights (f our-way f lashers).
This causes all f our outside turn
signals and both indicators in the
instrument panel to f lash. Use the
hazard warning lights if you need to
park in a dangerous area near heavy
traf f ic, or if your vehicle is disabled.
Instrument Panel Brightness, Hazard Warning Button
Inst rument s and Cont rols
Instrument Panel Brightness Hazard Warning Button
55
BUTTON BUTTON
Page 82 of 218
µµ
µ
µ
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
PWR/VOL knob or the AM/FM
button. Adjust the volume by turning
thesameknob.
The band and f requency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.
You can use any of f ive methods to
f ind radio stations on the selected
band:
the
preset buttons, and .
Use the TUNE knob to
tune the radio to a desired f requency.
Turn the knob right to tune to a
higher f requency, or lef t to tune to a lower f requency.
The SEEK f unction
searches up and down from the
current f requency to f ind a station
with a strong signal. To activate it,
press the or side of the
bar, then release it. Each preset button can
store one f requency on AM, and two
f requencies on FM.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two f requencies with each preset
button.
UsetheTUNE,SEEK,orSCAN
function to tune the radio to a
desired station.
Pick a preset button, and hold it
until you hear a beep.
Repeat steps 1 to 3 to store a total
of six stations on AM and twelve
stations on FM.
The preset f requencies will be lost if
your vehicle’s battery goes dead, is
disconnected, or the radio f use is
removed.
The SCAN f unction
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. You will see SCAN in
the display. The system will scan f or
a station with a strong signal. When
it f inds one, it will stop and play that
station for about 5 seconds.
If you do nothing, the system will
scan f or the next strong station and
play it f or 5 seconds. When it plays a
station you want to listen to, press
the SCAN button again. 1.
2.
3.
4.
CONT INUED
Playing the Radio
Comf ort and Convenience Feat ures
To Play the Radio
To Select a Station
TUNE,SEEK,SCAN, AUTO SELECT
TUNE SEEK
Preset
SCAN
79
Page 129 of 218
̵
µ
µ µ
µ
µ
Your authorized Honda dealer
knows your vehicle best and can
provide competent, ef f icient service.
However, service at a dealer is not
mandatory to keep your warranties
in effect. Maintenance may be done
by any qualif ied service f acility or
skilled person to keep your
warranties in ef f ect. Keep all the
receipts as proof of completion, and
have the person who does the work
f ill out the Maintenance Record.
Check your warranty booklet f or
more inf ormation.
We recommend the use of Honda
parts and f luids whenever you have
maintenance done.
U.S. Vehicles:
According to state and federal
regulations, f ailure to perf orm
maintenance on the items marked
with will not void your emissions
warranties. However, Honda
recommends that all maintenance
services be perf ormed at the
recommended time or mileage
period to ensure long-term reliability.
Youshouldcheckthefollowing
items at the specif ied intervals. If
you are unsure of how to perf orm
any check, turn to the appropriate
page listed.
Lights Check the operation of
the headlights, parking lights,
taillights, high-mount brake light,
turn signals, brake lights, and
license plate light monthly. See
page . Tires Check the tire pressure
monthly. Examine the tread f or
wear and foreign objects. See page
.
Brakes Check the f luid level
monthly. See page . Automatic transmission (CVT)
Check the f luid level monthly. See
page . Engine coolant level Check the
radiator reserve tank every time
you f ill the f uel tank. See page .
Engine oil level Check every time you fill the fuel tank. See
page .
95
140 143
154
144 96
Maintenance Schedule
Maint enance
Servicing Your Vehicle
Maintenance,
replacement, or repair of
emissions control devices and
systems may be done by any
automotive repair establishment
or individual using parts that are
‘‘certif ied’’ to EPA standards.
Owner’s Maintenance Checks
126
Page 149 of 218
Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.To change the bulb on the driver’s
side, start the engine, turn the
steering wheel all the way to the
right, then turn of f the engine. To
change the bulb on the passenger’s
side, turn the steering wheel to the
lef t.
Use a Phillips-head screwdriver to
remove the screw f rom the top of
the f ender.Pull the inner f ender cover back.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
3.
2. 4.
5.
4.
5.
1.
Lights
Maint enance
Replacing the Front Side Marker/
Turn Signal Light Bulb
146