navigation HONDA ODYSSEY 2014 RC1-RC2 / 5.G Navigation Manual

121

Map Menu
Traffic Rerouting™
Navigation
2.Rotate i to select Avoid. Press
u.
Repeat step 1 to 2 as necessary.
3.Move r to select Reroute. Press
u.

The system recalculates a detour
route that avoids the traffic
incidents.
1Traffic Rerouting™ Manually
You can choose to avoid up to 10 traffic
incidents. It is not always possible for the system
to calculate a route that avoids all traffic
incidents or specific traffic incidents you select.
The “On Route” tab on the Traffic List screen is
only available during route guidance.
You cannot select an incident to avoid from the
“All” tab.
You can also detour around a traffic incident
manually if you encounter an unexpected
obstacle.
2Taking a Detour P. 130

122Navigation
Changing Your RouteHMENU button (when en route)
This section describes how to alter your route, add an interim “waypoint” (pit stop),
choose a different destination, cancel your current destination, and continue your
trip after stopping.
Rotate i to select an item. Press u.
The following items are available:
•Voice: Select to hear the voice guidance when en route.2Listening to Voice Guidance
P. 114
•Destination List: Shows a list of waypoints. You can delete waypoints or edit the
order of them.
2Editing the Destination List
P. 128
•Pause Guidance: Pauses your current route.
2Pausing the Route
P. 123
•Resume Guidance: Resumes your current route. This item is displayed while the
route guidance is paused.
•Cancel Route: Cancels the route guidance.
2Canceling the Route
P. 123
•View Routes: Displays three different routes.
2Viewing the Routes
P. 109
1Changing Your Route
d “Display Destination”, d “Display
Navigation” (when en route)
If you press the MENU button when not en
route, the Destination Menu screen is displayed.
2Entering a Destination P. 84

123

Changing Your Route
Pausing the Route
Navigation
•Change Route Preference: Changes the route preferences (calculating method). 2Route Preference
P. 50
•Detour: Calculates a detour route.
2Taking a Detour
P. 130
•Avoid Streets: Avoids streets along your route.
2Avoiding Streets
P. 130
Pausing the RouteHMENU button (when en route)
 Pause Guidance
Pause the route guidance and return to the map screen. The destination icons and all
waypoint flags remain displayed on the map. Press the MENU button when en route
and select Resume Guidance to resume the route guidance.
Canceling the RouteHMENU button (when en route)
 Cancel Route
Cancel the route guidance and remove the destination and all waypoints from the
destination list. The system then returns to the map screen.
1Pausing the Route
You can also pause your route from the Map
Menu.
2Map Menu P. 1161Canceling the Route
You can also cancel your route from the Map
Menu.
2Map Menu P. 116

124

Changing Your Route
Adding Waypoints
Navigation
Adding WaypointsAdd up to four waypoints (pit stops) along the route to your destination.
Waypoints are displayed on the map
screen as small, numbered red flags.
The route follows the waypoints in
the order they are listed in the
Destination List.
1Adding Waypoints
Waypoints allow you to stop for gas or food, for
example, and then continue on to your
destination.
Press the NAV button to return to the map
screen without adding a waypoint at any time.
The search corridor used for adding waypoints
can be adjusted.
2Edit POI Search Radius Along Route P. 54
You can delete waypoints or edit the order of
waypoints in the destination list.
2Editing the Destination List P. 128

125

Changing Your Route
Adding Waypoints
Navigation
HMENU button (when en route)
 Destination List
 Add New Destination

Find Along Route
1.Rotate i to select a search
method to add a waypoint. Press
u.
The following items are available:
•Search Around: Searches in a spiral pattern around the location you select.
•Search Along: Searches within a “corridor” on either side of the locations you
select.
2.Rotate i to select a waypoint
category (e.g., GAS STATION).
Press u.
■Adding Waypoints from the Route Menu
1Adding Waypoints
Search method
“Search around” method
“Search along” method
Continued

126

Changing Your Route
Adding Waypoints
Navigation
3.Rotate i to select a place. Press
u.
The waypoint is added to the
Destination List.
4.Rotate i to select a location and
move the order of destinations.
Press u.
5.Move r and rotate i to select
Start Route. Press u.

The route is automatically
recalculated and displayed on
the map screen.

127

Changing Your Route
Adding Waypoints
Navigation
HMENU button (when en route)
 Destination List
 Add New Destination

Use Nav Menu
1.Rotate i to select a method to
enter a waypoint.
2Entering a Destination
P. 84

A new destination is added to
the end of the Destination list.
2.Move r and rotate i to select
Start Route. Press u.

The route is automatically
recalculated and displayed on
the map screen.
■Adding Waypoints from the Navigation Menu
1Adding Waypoints from the Navigation Menu
You can edit the order of waypoints and
destination.
2Editing the Destination List P. 128

128

Changing Your Route
Editing the Destination List
Navigation
Editing the Destination ListHMENU button (when en route)
 Destination List
1.Move r and rotate i to select
Edit Order. Press u.
2.Rotate i to select a list item to
move. Press u.
3.Rotate i to select a new location.
Press u.
4.Move r and rotate i to select
Start Route. Press u.

The route is automatically
recalculated and displayed on
the map screen.
■Editing the Order of Waypoints
1Editing the Order of Waypoints
Move r to rotate i to select Show All on
Map to display the destination and waypoints on
the map screen.

129

Changing Your Route
Editing the Destination List
Navigation
HMENU button (when en route)
 Destination List
1.Rotate i to select a list item to
delete. Press u.
2.Rotate i to select Delete. Press
u.
3.Rotate i to select Yes. Press u.
■Deleting Waypoints
1Deleting Waypoints
Move r and rotate i to select Delete All to
delete the destination and all the waypoints.
Select Show on Map to display the waypoint on
the map screen.

130

Changing Your Route
Taking a Detour
Navigation
Taking a DetourHMENU button (when en route)
 Detour
Calculate a detour route manually. The system attempts to calculate a new route by
avoiding the next 5 miles (while on a freeway) or 1 mile (while on a surface street).
Avoiding StreetsHMENU button (when en route)
 Avoid Streets
Select a street or streets along your route to avoid.
1.Rotate i to select the street you
want to avoid. Press u.

Repeat the procedure to avoid
other streets.
2.Move r to select Recalculate
Route. Press u.

The system calculates a new
route.
1Taking a Detour
The detour option is convenient if you encounter
an unexpected obstacle such as a road closure or
extremely heavy traffic congestion.1Avoiding Streets
Avoiding certain streets is convenient if you
know of road construction, road closures, or
excessive traffic along the route.
You cannot choose specific streets you want to
use, only those to avoid. However, you can select
intersections or waypoints (places/landmarks)
that the system will use in your route.
2Adding Waypoints P. 124
You can store up to 10 streets to avoid. You
cannot avoid your current street or the streets of
your waypoint(s) or destination (system beeps if
selected).