driver seat adjustment HONDA PRELUDE 1990 Owners Manual

Seats

Front Seat

Adjust the seat position by pulling up on the adjustment lever under
the front edge of the seat cushion, and sliding the seat to the
desired position. Then release the lever and make sure the seat is locked in position by moving it back and forth.

ADJUSTMENT
LEVER
RELEASE LEVER
The angle of the seat-back can be changed by pulling up on the lever
at the outside edge of the seat and leaning forward or back. Release
the lever and let the seat lock into place when it reaches the desired
angle.
Seat belts are most effective when the driver and passenger are
sitting up straight and well back in each seat.
Minor Adjustment of Driver's Seat-back Angle (Si)

For minor
adjustment of the driver's
seat-back angle, move the lever at
the lower left side of the seat-back forward or backward.

Do not adjust the driver's seat while the car is moving; the seat

could move suddenly, causing loss of vehicle control.
To reduce the risk of sliding under the seat belts in a collision,

the seat-backs should be reclined no more than is necessary for

comfort.

(cont'd)

LEVERProCarManuals.comMain Menu t s

Seats (cont'd)
To Get In/Out of Rear Seat
For easier access to or from the rear seat, pull up the angle
adjustment lever on each front seat or the lever on the inside edge
of the passenger seat-back to swing the seat-back forward.
Seat-back Angle Memory (Si)
The driver's seat is equipped witha "memory" button to allow the

seat-back to
return to its

previously set angle.

Push the "memory" button

before pulling the angle adjust-
ment lever up for rear seat access.
MEMORY BUTTON
Store any luggage or cargo in the trunk. If you are carrying more items than will fit in the trunk, use the floor space between the
front and rear seats.
Do not store any items on the shelf behind the rear seat; they
may become dangerous projectiles in a collision.
Weight limits shown on the label on the edge of the driver's door must be observed. The total weight of passengers and
cargo must not exceed the total weight limit on the label. Pull upProCarManuals.comMain Menu t s

Driver's Lumbar Support (Si)
The tower back support can be adjusted by moving the
lever on the inner side of the
seat-back to give more or
less support.
Driver's Side Supports (Si)
Seat-back side support can be
adjusted wider or narrower by
turning the knob on the inner side of the seat-back.
Do not try to adjust lumbar or side supports while driving. Make
the adjustment while sitting in your normal driving position before driving away.

(cont'd)ProCarManuals.comMain Menu t s