display Hyundai Sonata Hybrid 2016 Multimedia Manual
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2016, Model line: Sonata Hybrid, Model: Hyundai Sonata Hybrid 2016Pages: 308, PDF Size: 15.72 MB
Page 133 of 308
Copyright for Brand Icon Copyright for Brand Icon
The marks of companies displayed by this product to indicate business locations are the marks of their respective owners. The use of
such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product.
Copyright for Junction ViewCopyright for Junction View
Junction View Data provided by ZENRIN USA, INC. Copyright(C) 20XX, All rights Reserved.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 136 of 308
6-2 I Voice Recognition
What is Voice Recognition?
Voice recognition technology runs the sys-
tem as ordered by recognizing your voice
command for operation of the multimedia
while y
ou are driving the car.
Regretfully, not all possible voice com-
mands are recognized by the system due
to technological limitations. To make up for
these limitations, the system displays the
voice commands that are available for you
to use.
There are errors in communication between
people. Likewise, voice recognition some-
times misunderstands your voice command
in some circumstances. If this happens,
either check the screen for the available
options and say the command again, or
manually select and press the button for the
corresponding command on the screen.
Precautions Required
for Successful Voice
Recognition
1. Voice recognition supports only the
commands that are displayed on the
screen and written in the User's Guide.
2. To ensure the correct recognition and
execution of your command, say your
command when you hear the beep after
a voice prompt.
3. Voice recognition automatically ends if:
1) A call is incoming or outgoing
2) A media (USB or iPod, etc.) is con-
nected or disconnected
3) The front or rear view camera is
operated (optional)
4) The car engine starts or stops
5) A system key, such as
RADIO key
or
MEDIA key is selected
6) An emergency occurs, for example
re-searching for the route after the
navigation route has been lost 4.
The microphone that recognizes your
voice is located over the head part in
the driver's seat. To make your com-
mands better understood, keep your
body straight in the driver's seat when
speaking the command.
5. Speaking naturally and clearly will
ensure better recognition of your voice
commands.
6. In the following cases voice recognition
will be affected by ambient noise.
1) The sound of the wind if any win-
dow or the sun roof is open.
2) High speed blower from the air
v
ents. Set climate control to blow
lower than level 3.
3)
Vibrations from passing through a
tunnel.
4) Vibrations from driving on an
uneven road.
5) Storms and heavy rain.
Voice Recognition
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 137 of 308
Starting/Ending and Setting Voice Recognition I 6-3
06
Starting/Ending and Setting
Voice Recognition
Starting Voice Recognition
Press the key briefly (less than 0.8
seconds) on the steering wheel control to
activate voice recognition.
Ending Voice Recognition
1. Select “Exit” to the left of the bottom to end voice recognition.
2. Press and hold (over 0.8 seconds) the
key on the steering wheel con-
trol to end voice recognition.
Quick Run of Voice
Recognition (Manual Mode)
Usually, you are supposed to say a com-
mand to execute the desired operation
after the voice guidance. However, it takes
a little time to wait for the voice guidance.
If you would like to activate the desired
operation more quickly, you can just touch
the commands displayed on the screen.
This feature is useful when you feel the
voice guidance is too long or voice com-
mands do not work as you desired.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 140 of 308
6-6 I Voice Recognition
Voice Recognition Screen
Overview
Start Screen
Help Display
NameDescription
Most
frequently
used
commands Displays the six most fre-
quently used commands.
Not
available
command Displays commands that
are not available due to
a failure in meeting the
conditions for using them
and thus need additional
settings. The conditions
required for using them
will be described briefly
under each command.
Name
Description
Voice
recognition
status icons Standby Voice guidance Voice command
process
User's
speaking
volume being
recognized Displays the voice
command volume in
real time.
Recognized
results Displays the voice rec-
ognition result.
Help
Displays all available
help commands in a
tree format.
Exit
Ends the voice recog-
nition.
Name
Description
Command
list
!Ÿ
Shows the available
commands.
!Ÿ
Select or say a com-
mand to display addi-
tional commands in
detail.
How to
use for
selected
item This section shows how to
use voice recognition for
the selected item.
How to
use in
general This section displays how
to use voice recognition in
general.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 141 of 308
Voice Recognition Screen Overview I 6-7
06
Instructions for Using
Voic e R e cognit ioni Information
In the instructions screen, no voice is
recogniz
ed, so you must manually issue
commands. Because the instructions screen
displays a lot of content, you can not view it
while driving for safety precautions.
Name Description
Detail
instruction This section describes
how to use voice recog-
nition in detail.
Close button
Closes the screen and
restarts voice recogni-
tion.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 142 of 308
6-8 I Voice Recognition
Voice Commands
Types of Commands
Voice recognition commands are classified as "Global Commands"
and "Local Commands."
1. Global Commands ("J
): Commands that can be used immedi-
ately after activating voice recognition.
2. Local Commands (
!¹): Commands that can be used when a
multimedia, navigation, or Bluetooth call is running, or displayed
on the screen, after activating voice recognition.
Call Commands
* Check the following before using call commands :
1. Voice commands related to phone calls can be used after con- necting a Bluetooth device.
2.
To call a person, for example “Call
list. For details on downloading contacts, see “Part 3. Using
Bluetooth > Chapter 3. Bluetooth Phone > 3.10 Contacts”.
3. After downloading the Bluetooth contacts, it will take some time to convert the Contacts into voice data during which time you
cannot make a call by name yet. The time it takes to convert
v
oice data may vary depending on the number of Contacts
downloaded on the phone.
Command Operation
"J Call Displays downloaded Contacts, after this
you can make a call by saying the name.
"J Call
in the downloaded Contacts.
"J Call
Mobile You can call a
person
the n
umber that is saved as “Mobile” in
the downloaded Contacts.
e.g.) Call “John Smith” on Mobile
"J Call
Office You can call a
person
the n
umber that is saved as “Office” in the
downloaded Contacts.
e.g.) Call “John Smith” in Office
"J Call
Home You can call a
person
the n
umber that is saved as “Home” in the
downloaded Contacts.
e.g.) Call “John Smith” at Home
"J Call
Other You can call a person
the n
umber that is saved as “Other” than
“Mobile, Home, or Office” in the down-
loaded Contacts.
e.g.) Call “John Smith” on Other
"J Dial Number Displays a screen where you can say a
phone number to dial.
"J Dial
e.g.) Dial 111 555 1234
"J Redial Directly calls at the number that you last
dialed.
"J Call History Displays your Call History, where you can
say the list number to make a call.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 143 of 308
Voice Commands I 6-9
06
Navigation Commands
* Check the following before you use navigation commands :
1. Search for and find addresses located in the state or province your car is currently in.
If you want to search in another state, say the name of state/ province and then look it up.
Find Address is classified by states/provinces to provide you with faster service.
2. Some commands such as “Cancel Route” are available only when the destination is fixed.
Command Operation
"J POIs Near
Destination Finds POIs near the destination.
After this command, you can find the name of
a location step-by-step.
"J
Near
Destination Find
For details of
Nearest
e.g.) “Banks” Near Destination
"J Map Moves to the current position on the naviga-
tion map
"J Previous
Points Displays a list combining Previous Destinations,
Previous Searches, and Previous Starting Points
all together.
You can then set a destination by saying the list
number.
"J Previous
Destinations Displays a list of recent destinations that you
can return to by saying the number in the list.
"J Previous
Searches Displays a list of recent searches, where you
can set a destination by saying the number in
the list.
"J Previous
Starting Points Displays a list of recent starting points that you
can return to by saying the number in the list.
"J Traffic
Information Moves to the Traffic Information menu screen.
"J Go Home Set the destination to your home.
Your home must first be set in the Navigation
system.
"J Go to Office Set the destination to your office/work.
Your office/work must first be set in the
Navigation system.
Command
Operation
"J Find Address
in
!Ÿ
Finds the address in
the destination.
e.g.) Find Address in California
!Ÿ
To find an address, you should say "House
Number ª
Street ª
City" (in order, exclud-
ing the state).
e.g.) 300 (Three Zero Zero) Main Street, Almond
"J Find Address Finds the address and sets it as the destination.
"J Find the
Nearest POI Find the nearest points of interest from your
current location.
After this command, you can find the name of
a location step-by-step.
"J Find the
Nearest
location.
For details of
Nearest
e.g.) Find the Nearest
“Parking”
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 144 of 308
6-10 I Voice Recognition
CommandOperation
"J Hospital Displays a list of the nearest hospitals.
You can then set a destination by saying the
list number.
"J Dealership Displays a list of the nearest car dealerships.
You can then set a destination by saying the
list number.
"J Road
Assistance Displays a list of the nearest road assistance
locations.
You can then set a destination by saying the
list number.
"J Show Route Displays a map overview of the entire route
to your destination.Command
Operation
"J Turn Guidance
On Turns on the voice guidance system.
"J Turn Guidance
Off Turns off the voice guidance system.
"J Zoom All the
Way Out Zooms out from the navigation map to the
fullest.
"J Zoom All the
Way In Zooms in on the navigation map to the fullest.
"J Cancel Route Cancels the route to the fixed destination and
exits guidance.
"J Destination
Information Tells you the remaining distance and time to
your destination.
"J Route Options Restarts the route to your destination.You can
then select either “Faster Time” or “Shorter
Distance”.
"J Find Faster
Time Route Starts a new route to your destination that will
take the least amount of time.
"J Find Shorter
Distance
Route Starts a new route to your destination that will
use the shortest distance.
"J Emergency
Services Displays a list of nearest Police Station,
Hospital, Dealership, or Road Assistance.
You can then set a destination by saying the
list number.
"J Police Station Displays a list of the nearest police stations.
You can then set a destination by saying the
list number.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 149 of 308
Voice Commands I 6-15
06
Other Commands List
(Commands used in List / Help)
CommandOperation
"J Help Moves to the voice recognition help screen.
All available commands can then be identified
and used.
!¹ Line 1~5
(One~Five) When you cannot select a certain name,
such as in Call History, you can select it
using numbers.
Simple numbers can be recognized, such
as “One” or “Two."
!¹ Yes / No When voice recognition is activated, this
command is used when an answer is
requested for a confirmation question.
!¹ Previous Page /
Next Page When five or more searched items are listed,
you can move to the previous or next page
using a voice command.
!¹ Manual Input When Dial or POI Name search results are
displayed, this command is used to search
manually, rather than to search with a voice
command.
Voice recognition stops after this command
is used.
!¹ Go Back Moves to the previous screen.
"J Exit Ends the voice recognition.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 159 of 308
Hybrid I 7-3
07
ECO Level
ECO driving information is shown in 8 levels
according to the vehicle’s driving.
The following ECO levels are displayed
according to the vehicle’s mode.
The level increases as your driving
becomes more economical and environ-
ment-friendly.Energy Flow
Status of power delivery is shown for each
component according to the vehicle’s driv-
ing.
FeaturesDescription
EngineShows operating status of
the engine.
Electric
Motor Shows operating status of
the hybrid motor.
Battery
Shows operating status and
remaining battery power for
driving the motor.
Shows flow of power delivery between
the components.
Shows driving status of the hybrid
vehicle.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E