AUX INFINITI QX56 2011 Factory User Guide

AV-56
< ECU DIAGNOSIS INFORMATION >
AV CONTROL UNIT
106(W) 120
(R) Sound signal LH Output Ignition
switch ON When DVD or USB mode is
selected on headrest dis-
play unit LH or RH.
107 (B) 121
(G) Sound signal RH Output Ignition
switch ON When DVD or USB mode is
selected on headrest dis-
play unit LH or RH.
11 7 — S h i e l d — — — —
11 8 (O) 11 9
(W/L) AUX sound signal RH Input Ignition
switch ON When front AUX mode is
selected.
122 — Shield — — — —
129 (G) — USB ground — — — —
130 (R) — USB D
− signal — — — —
131 (W) — V BUS signal — — — —
132 (L) — USB D+ signal — — — —
133 — Shield — — — —
150 — FM sub Input — — —
151 — AM-FM main Input — — —
152 Ground Antenna amp. ON signal Input Ignition
switch ON —12.0 V
153 Ground GPS antenna signal Input Ignition
switch ON Not connected GPS anten-
na connector.
5.0 V
154 — Shield — — — —
157 Ground RGB digital image signal
(
− ) OutputIgnition
switch
ON Not connected connector. 1.3 V
Te r m i n a l
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
SKIB3609E
SKIB3609E
SKIB3609E
Revision: 2010 May2011 QX56

AV
HEADREST DISPLAY UNITAV-63
< ECU DIAGNOSIS INFORMATION >
C
DE
F
G H
I
J
K L
M B A
O P
19
(L/Y) Ground Cont. ground — Ignition
switch ON —0 V
20
(W/L) Ground Image switch signal Output Ignition
switch ON When DVD, USB or front
AUX image is displayed on
headrest display unit.
0.5 V
When rear AUX image is
displayed on headrest dis-
play unit. 4.5 V
23
(R/L) Ground Composite image signal
ground
—Ignition
switch ON —0 V
24
(Y) Ground Composite image signal Input Ignition
switch ON When DVD, USB or front
AUX image is displayed on
headrest display unit.
25 — Shield — — — —
27
(R/W) Ground AV ground — Ignition
switch
ON —0 V
28 — Shield — — — —
30
(P) 29
(BR) Headphone sound signal
RH
InputIgnition
switch
ON Headphone sound output.
32
(SB) 31
(LG) Headphone sound signal
LH
InputIgnition
switch ON Headphone sound output.
Te r m i n a l
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
SKIB2251J
SKIB3609E
SKIB3609E
Revision: 2010 May2011 QX56

AV-64
< ECU DIAGNOSIS INFORMATION >
VIDEO DISTRIBUTOR
VIDEO DISTRIBUTOR
Reference ValueINFOID:0000000006216230
TERMINAL LAYOUT
PHYSICAL VALUES
JSNIA3024ZZ
Terminal
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
1
(B) —Ground — Ignition
switch
ON —0 V
2
(Y/R) Ground Battery power supply Input Ignition
switch OFF — Battery voltage
3
(B) —Ground — Ignition
switch
ON —0 V
4
(V) Ground ACC power supply Input Ignition
switch ACC — Battery voltage
5
(V/W) Ground Cont. ground for headrest
display unit RH —Ignition
switch ON —0 V
6
(L/W) Ground ACC signal for headrest
display unit RH OutputIgnition
switch
OFF — 3.3 V
Ignition switch ACC —0 V
7
(W/R) Ground Cont. ground for headrest
display unit LH —Ignition
switch ON —0 V
8
(GR/R) GroundACC signal for headrest
display unit LH OutputIgnition
switch
OFF — 3.3 V
Ignition switch ACC —0 V
9
(O/B) Ground Image switch signal for
headrest display unit RH
InputIgnition
switch ON When DVD, USB or front
AUX image is displayed on
headrest display unit RH.
0.5 V
When rear AUX image is
displayed on headrest dis-
play unit RH. 4.5 V
Revision: 2010 May2011 QX56

AV
VIDEO DISTRIBUTORAV-65
< ECU DIAGNOSIS INFORMATION >
C
DE
F
G H
I
J
K L
M B A
O P
10
(R/B) Ground
Image switch signal for
headrest display unit LH InputIgnition
switch
ON When DVD, USB or front
AUX image is displayed on
headrest display unit LH.
0.5 V
When rear AUX image is
displayed on headrest dis-
play unit LH. 4.5 V
14
(B) 15
(G) Headphone sound signal
RH for headrest display unit
RH
OutputIgnition
switch ON Output headphone sound
from headrest display unit
RH to headphone.
16
(W) 17
(R) Headphone sound signal
LH for headrest display unit
RH
Output
Ignition
switch
ON Output headphone sound
from headrest display unit
RH to headphone.
18
(P/L) Ground
AV ground for headrest dis-
play unit RH —Ignition
switch
ON —0 V
19
(P) Ground AV ground for headrest dis-
play unit LH
—Ignition
switch ON —0 V
20
(B) 21
(G) Headphone sound signal
RH for headrest display unit
LH
Output
Ignition
switch
ON Output headphone sound
from headrest display unit
LH to headphone.
22
(W) 23
(R) Headphone sound signal
LH for headrest display unit
LH
OutputIgnition
switch ON Output headphone sound
from headrest display unit
LH to headphone.
27
(W) Ground Composite image signal
ground for headrest display
unit RH
—Ignition
switch ON —0 V
28
(R)
Ground Composite image signal for
headrest display unit RH
OutputIgnition
switch ON When DVD, USB, front
AUX or rear AUX image is
displayed on headrest dis-
play unit RH.
Te r m i n a l
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E
SKIB2251J
Revision: 2010 May2011 QX56

AV-66
< ECU DIAGNOSIS INFORMATION >
VIDEO DISTRIBUTOR
29 — Shield — — — —
30 — Shield — — — —
31
(Y/L) Ground Composite image signal
ground for headrest display
unit LH
—Ignition
switch ON —0 V
32
(Y/G) Ground Composite image signal for
headrest display unit LH
OutputIgnition
switch ON When DVD, USB, front
AUX or rear AUX image is
displayed on headrest dis-
play unit LH.
33
(L) Ground
Composite image signal
ground —Ignition
switch
ON —0 V
34
(P) Ground Composite image signal Input Ignition
switch
ON When DVD, USB or front
AUX image is displayed on
headrest display unit LH or
RH.
35 — Shield — — — —
40
(LG) 39
(V) AUX image signal Input Ignition
switch ON When rear AUX image is
displayed on headrest dis-
play unit LH or RH.
41 — Shield — — — —
45
(W) 46
(R) Sound signal LH Input Ignition
switch
ON When DVD, USB or front
AUX mode is selected on
headrest display unit LH or
RH.
47
(B) 48
(G) Sound signal RH Input Ignition
switch ON When DVD, USB or front
AUX mode is selected on
headrest display unit LH or
RH.
49 — Shield — — — —
53 — Shield — — — — Terminal
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
SKIB2251J
SKIB2251J
SKIB2251J
SKIB3609E
SKIB3609E
Revision: 2010 May2011 QX56

AV
VIDEO DISTRIBUTORAV-67
< ECU DIAGNOSIS INFORMATION >
C
DE
F
G H
I
J
K L
M B A
O P54
(B) 56
(R) AUX sound signal LH Input Ignition
switch ON When rear AUX mode is
selected on headrest dis-
play unit LH or RH.
55
(W) 56
(R) AUX sound signal RH Input Ignition
switch ON When rear AUX mode is
selected on headrest dis-
play unit LH or RH.
Te r m i n a l
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
SKIB3609E
SKIB3609E
Revision: 2010 May2011 QX56

AV-72
< ECU DIAGNOSIS INFORMATION >
AROUND VIEW MONITOR CONTROL UNIT
17
(SB) — AV communication signal (H)
Input/
Output —— —
18
(LG) — AV communication signal (L) Input/
Output —— —
23
(LG) Ground Auxiliary infrared LED power
supply OutputIgnition
switch ON “CAMERA” switch is ON or
shift position is “R”.
5.5 V
27
(W) Ground Camera image signal Output Ignition
switch ON At camera image display
28 — Shield — — — —
29
(Y) 30
(G) Side camera passenger side
image signal
InputIgnition
switch
ON “CAMERA” switch is ON or
shift position is “R”.
31 — Shield — — — —
32
(B) Ground
Side camera passenger side
ground —Ignition
switch
ON —0 V
33
(W) Ground Side camera passenger side
communication signal Input/
Output Ignition
switch ON “CAMERA” switch is ON or
shift position is “R”.
34
(R) Ground Side camera passenger side
power supply OutputIgnition
switch ON “CAMERA” switch is ON or
shift position is “R”.
6.0 V
35
(Y) Ground Rear camera communication
signal Input/
Output Ignition
switch ON “CAMERA” switch is ON or
shift position is “R”.
36
(R) Ground Rear camera power supply Output Ignition
switch ON “CAMERA” switch is ON or
shift position is “R”.
6.0 V
37 — Shield — — — —
Te r m i n a l
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
SKIB2251J
JSNIA0834GB
JSNIA0836GB
JSNIA0836GB
Revision: 2010 May2011 QX56

AV
COMPOSITE IMAGE SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DIS-
PLAY UNIT)
AV-167
< DTC/CIRCUIT DIAGNOSIS >
C
DE
F
G H
I
J
K L
M B A
O P
COMPOSITE IMAGE SIGNAL CIRCUI T (AV CONTROL UNIT TO FRONT
DISPLAY UNIT)
DescriptionINFOID:0000000006216328
 DVD is played by inserting DVD into the AV control unit.
 DVD image signals are transmitted to the front display unit and video distributor.
 AV control unit receives the image signal from the front auxiliary input jacks and then transmits it to the front
display unit.
 AV control unit receives the image signal from the USB (video data) and then transmits it to the front display
unit and video distributor.
 Video distributor receives the image signal from the AV control unit and then transmits it to the headrest dis-
play unit.
Diagnosis ProcedureINFOID:0000000006216329
1.CHECK CONTINUITY COMPOS ITE IMAGE SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect AV control unit connector and front display unit connector.
3. Check continuity between AV control unit harness connector and front display unit harness connector.
4. Check continuity between AV control unit harness connector and ground.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair harness or connector.
2.CHECK COMPOSITE IMAGE SIGNAL
1. Connect AV control unit connector and front display unit connector.
2. Turn ignition switch ON.
3. Check signal between AV control unit harness connector and ground.
Is the inspection result normal?
YES >> Replace front display unit. Refer to AV-213, "Removal and Installation".
NO >> Replace AV control unit. Refer to AV-212, "
Removal and Installation".
AV control unit Front display unit
Continuity
Connector Terminal Connector Terminal
M210 68 M215 18 Existed
AV control unit GroundContinuity
Connector Terminal
M210 68 Not existed
(+) (− ) Condition Reference value
AV control unit
Connector Terminal
M210 68 Ground At DVD image is displayed.
SKIB2251J
Revision: 2010 May2011 QX56

AV-168
< DTC/CIRCUIT DIAGNOSIS >
COMPOSITE IMAGE SIGNAL CIRCUIT (AV CONTROL UNIT TO VIDEO DISTRIB-
UTOR)
COMPOSITE IMAGE SIGNAL CIRCUI T (AV CONTROL UNIT TO VIDEO
DISTRIBUTOR)
DescriptionINFOID:0000000006216330
 DVD is played by inserting DVD into the AV control unit.
 DVD image signals are transmitted to the front display unit and video distributor.
 AV control unit receives the image signal from the front auxiliary input jacks and then transmits it to the front
display unit.
 AV control unit receives the image signal from the USB (video data) and then transmits it to the front display
unit and video distributor.
 Video distributor receives the image signal from the AV control unit and then transmits it to the headrest dis-
play unit.
Diagnosis ProcedureINFOID:0000000006216331
1.CHECK CONTINUITY COMPOS ITE IMAGE SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect AV control unit connector and video distributor connector.
3. Check continuity between AV control unit har ness connector and video distributor harness connector.
4. Check continuity between video distributor harness connector and ground.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair harness or connector.
2.CHECK COMPOSITE IMAGE SIGNAL
1. Connect AV control unit connector and video distributor connector.
2. Turn ignition switch ON.
3. Check signal between video distributor harness connector and ground.
Is the inspection result normal?
YES >> Replace video distributor. Refer to AV-215, "Removal and Installation".
NO >> Replace AV control unit. Refer to AV-212, "
Removal and Installation".
AV control unit Video distributor
Continuity
Connector Terminal Connector Terminal
M209 34 M218 34 Existed
Video distributor GroundContinuity
Connector Terminal
M218 34 Not existed
(+) (− ) Condition Reference value
Video distributor
Connector Terminal
M218 34 Ground When DVD, USB or front AUX im-
age is displayed on headrest dis-
play unit LH or RH.
SKIB2251J
Revision: 2010 May2011 QX56

AV
COMPOSITE IMAGE SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO HEADREST
DISPLAY UNIT)
AV-169
< DTC/CIRCUIT DIAGNOSIS >
C
DE
F
G H
I
J
K L
M B A
O P
COMPOSITE IMAGE SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO HEAD-
REST DISPLAY UNIT)
DescriptionINFOID:0000000006216332
 DVD is played by inserting DVD into the AV control unit.
 DVD image signals are transmitted to the front display unit and video distributor.
 AV control unit receives the image signal from the front auxiliary input jacks and then transmits it to the front
display unit.
 AV control unit receives the image signal from the USB (video data) and then transmits it to the front display
unit and video distributor.
 Video distributor receives the image signal from the AV control unit and then transmits it to the headrest dis-
play unit.
Diagnosis ProcedureINFOID:0000000006216333
1.CHECK CONTINUITY COMPOS ITE IMAGE SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect video distributor connecto r and headrest display unit connector.
3. Check continuity between video distributor harne ss connector and headrest display unit harness connec-
tor.
*1: Headrest display unit LH
*2: Headrest display unit RH
4. Check continuity between headrest display unit harness connector and ground.
*1: Headrest display unit LH
*2: Headrest display unit RH
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair harness or connector.
2.CHECK COMPOSITE IMAGE SIGNAL
1. Connect video distributor connector and rear display unit connector.
2. Turn ignition switch ON.
3. Check signal between rear display unit harness connector using an oscilloscope.
Video distributor Headrest display unit Continuity
Connector Terminal Connector Terminal
M217 32
B554
*124 Existed
28 B574
*224 Existed
Headrest display unit GroundContinuity
Connector Terminal
B554
*124 Not existed
B574
*224
(+)
(− ) Condition Reference value
Headrest display unit
Connector Terminal
Revision: 2010 May2011 QX56