light INFINITI QX60 2014 Quick Reference Guide

19
Rear Climate Controls
To activate the system:



1.
Press the REAR button

01 on the front control panel until Rear Air-conditioning screen
is displayed.
•

The

indicator

light

will

illuminate.
08 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the defroster control button to turn the system on. The A/C automatically
turns on when the defroster mode is selected. This feature removes humid\
ity from
the air.
To defrost the front and side windows, set the temperature controls 03 and fan
speed controls 07 to their maximum settings.
09 DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS
Push the rear window defroster switch
to turn the system on or off. This function automatically turns off after approximately 15 minutes.
10 REAR AIR CONDITIONER To control the rear automatic air conditioning

system with the front air conditioner control
panel, press the REAR button.
When the rear automatic air conditioning system
is on, the indicator light on the
REAR button will
illuminate and the front display will switch to the
rear air conditioner screen. Use the driver
temperature and fan speed buttons to adjust settings.
To adjust the front air conditioning system, press the REAR button again.
To turn off the rear automatic air conditioning system from the front co\
ntrols, press
the REAR button until the Rear Air-conditioning screen is displayed. Then press the
OFF button.
The rear control buttons will not function when Rear Air-conditioning screen is shown
on the front display.
11 INTAKE AIR CONTROL BUTTON
Press the intake air control button to recirculate interior air inside the vehicle. The
indicator light on the button will illuminate. This system is used to a\
void certain
outside odors and helps to adjust the inside vehicle temperature more ef\
fectively.
The air recirculation mode cannot be activated when the climate control \
sys tem is in the
front defrost mode
or front defrost and foot vent mode
.
Press the intake air control button again to change the air circulation from the
intake air to the outside air. The
indicator light on the button will turn off.
12 OFF BUTTON Press the
OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 1910/9/13 11:09 AM

first drive features
0201
030506
04
FM/AM/SiriusXM®* Satellite Radio with CD/DVD Player (if so equipped)
01 VOLUME/ON•OFF CONTROL KNOB
Press the
VOL/ON•OFF control knob to turn the system on or off. Turn the knob right or
left to increase or decrease the volume.
02 TUNE/FOLDER/AUDIO CONTROL KNOB
To manually tune the radio, turn the
TUNE/FOLDER/AUDIO knob left or right.
03 SEEK•CAT/TRACK BUTTONS
To scan quickly and stop at the previous or next broadcast station, pres\
s th
e or
end of the SEEK•CAT/TRACK button.
For satellite radio, press the or end of the SEEK•CAT/TRACK button to switch
to the first channel of the previous or next category.
To change tracks on a CD, press the or end of the SEEK•CAT/TRACK button.
To fast forward or rewind a track on a CD, press and hold the or end of the
SEEK•CAT/TRACK button.
01
02
05
0304
*SiriusXM® Satellite Radio is only available on vehicles equipped with an optional\
satellite radio subscription service.20 •
The
Fan Speed, Temperature, AUTO, and OFF buttons will now control the Rear
Air-conditioning system.


2.
Press the
REAR button

01 again, and the screen
will return to what was previously displayed.
•


The


indicator

light

will

stay illuminated to
indicate that the Rear Air-conditioning system
is active.
OFF button
02 — Turns off the rear climate control
system, and
REAR button indicator light.
Fan speed control buttons 03 — Press
or
to increase or decrease fan speed.
Temperature increase and decrease buttons 04 —
Adjusts the rear temperature up or down
.
AUTO button
05 — System automatically works
to keep air flow and fan speed at a
constant temperature.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 2010/9/13 11:09 AM

21
USB/iPod® Interface
The USB jack 01 is located in the center console
under the arm rest.
When a compatible USB memory device or
iPod® is plugged into the USB jack, compatible
audio and video files stored on the device can
be played through the vehicle’s audio system
and front display.
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual.
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has
reached 25 MPH (40 km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the CRUISE

ON/OFF

switch
01. The
CRUISE
indicator light in



the instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the
desired speed, push the COAST/SET switch
02
and release. The SET indicator light
in the instrument panel will illuminate. Take your foot
off the accelerator pedal.
y
our vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 03. When the



vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 02. Release the



switch when the vehicle slows to the desired speed.
0102
03
04
01
04 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, six for the AM band and eigh\
teen for
satellite radio.
To store a station in a preset, you must first select a radio band by pr\
essing the
FM•AM


05 or XM
06 button, then tune to the desired FM, AM or XM satellite radio station.
Then press and hold the desired station preset button
(1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indic\
ator will then
display and the sound will resume. Programming is now complete.
To retrieve a previously set station, select the radio band where the pr\
eset was stored
then press the corresponding station select button (1-6).
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 2110/9/13 11:09 AM

first drive features
Intelligent Cruise Control (ICC) System (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set Vehicle-To-Vehicle Distance Control mode,



press the
CRUISE ON/OFF button
01 for less than 1.5
seconds. The
CRUISE indicator light
02 will illuminate.
Accelerate to the desired speed.
Push down on the
COAST/SET switch
03 and release
it. Cruise control will be set to the desired speed.
Press the distance button 04 repeatedly to change
the set distance between long, middle, and short.
Wh en a vehicle is not detected ahead of you in



the lane, the set distance and set vehicle speed




indicator lights will illuminate 05 in set mode.
When a vehicle is detected ahead of you in the lane,



the vehicle ahead detection, set distance, and set



vehicle speed indicator lights will illuminate 06 in set mode.
To reset at a faster cruising speed, push and hold the
ACCEL/RES
switch
07. When the vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET
switch
03. Release the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch
08 or tap the brake pedal. The set
vehicle speed indicator 05 will go out.
To turn off cruise control, press the
CRUISE ON/OFF button
01. The CRUISE indicator light

02, in the instrument panel, will turn off.
To set conventional (fixed speed) cruise control mode:
While cruise control is off, press the CRUISE ON/OFF
button 01
and hold it down for more
than 1.5 seconds. The
CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.



Cruise control will be set to the desired speed.
To switch between the two cruise control modes:
When one of the two cruise modes is in use, you must turn the system off\
, a nd then turn it
on again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
0403
0708
0205
06
To cancel the preset speed, push the CANCEL switch
04.
To turn off cruise control, push the CRUISE
ON/OFF switch
01. Both the
CRUISE indicator
light
and the

SET indicator light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
22
1591599_14b_Infiniti_QX60_QRG_100913.indd 2210/9/13 11:09 AM

system guide
Navigation System (if so equipped)
01 Touch screen display.
02 Destination (DEST) – Press to enter a destination.
03 Information
(INFO) – Press to display the vehicle, traffic (if so equipped), weather \
(if so
equipped) or voice recognition information.
04 SETTING – Press to access the system settings.
05 Infiniti Controller

• ENTER Button – Press the ENTER button to select the highlighted item on the screen.
•
Center

Dial – Turn the dial to highlight an item on the screen, adjust a setting or adjust
the map scale.


•
Slide
the controller (push upward/downward/leftward/rightward) to select an item on
the screen, to adjust a setting or scroll the map in 8 directions.
06 ROUTE – Press to access guidance control functions such as guidance cancel\
lation, route
priority or waypoint setting on the route.
07 MAP – Press to display the map. While following a programmed route, pres\
s multiple times
to change the type of route information.
08 STATUS – Press multiple times to display audio information, the air conditioner status,
fuel economy or navigation directions.
01
020304
0908
1110
0706
05
30
1591599_14b_Infiniti_QX60_QRG_100913.indd 3010/9/13 11:09 AM

HomeLink® Universal Transceiver
The HomeLink system can learn and consolidate the functions of up to 3 d\
ifferent hand-
held transmitters, operating items such as garage doors, property gates,\
outdoor and
indoor lights or alarm systems.
To program the HomeLink® Universal Transceiver:
•
Position


the

handheld

transceiver 1-3 in (26-76 mm) away from the HomeLink surface,
keeping the HomeLink indicator light in view.


•
Press


and

hold

the

desired HomeLink button and the handheld transmitter button

simultaneously until the HomeLink indicator light flashes slowly and the\
n rapidly.


•
Both


buttons

may

be

released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the HomeLink button\
and observe the
indicator light:

•
A
solid continuous light indicates the programing is complete and the HomeLink button
will activate your device.
•
A

blinking light that turns to a solid continuous light after 2 seconds indicates
additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete th\
e
programing process:

•
At
the receiver of the device that you are programing to the HomeLink button, press and
release the learn or smart button (the name may vary by manufacturer, b\
ut it is usually
located near where the hanging antenna wire is attached to the unit).
y ou have
approximately 30 seconds to initiate the following step.
•
Press

and hold the programed HomeLink button for 2 seconds and release.
y ou may have to repeat the previous 2 steps up to 3 times to complete the\
programing
process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website
at www.homelink.com or call 1-800-355-3515.
HOMELINk
32
system guide
1591599_14b_Infiniti_QX60_QRG_100913.indd 3210/9/13 11:09 AM