wheel bolt torque ISUZU KB P190 2007 Workshop Repair Manual

ISUZU KB P190 2007 Workshop Repair Manual KB P190 2007 ISUZU ISUZU https://www.carmanualsonline.info/img/61/57177/w960_57177-0.png ISUZU KB P190 2007 Workshop Repair Manual

Page 4 of 6020

ISUZU KB P190 2007  Workshop Repair Manual 0A-2  GENERAL INFORMATION 
GENERAL REPAIR INSTRUCTIONS 
1. Park the vehicle on level ground and chock the front or rear wheels before lifting the vehicle. 
2.  Raise the vehicle with a jack set agains

Page 22 of 6020

ISUZU KB P190 2007  Workshop Repair Manual 0B-4  MAINTENANCE AND LUBRICATION 
  
  
I : Inspect and correct or replace as necessary     A : Adjust  
R : Replace or change     T : Tighten to specified torque    L : Lubricate 
 SERVICE INTERVAL:

Page 24 of 6020

ISUZU KB P190 2007  Workshop Repair Manual 0B-6  MAINTENANCE AND LUBRICATION 
  
  
I : Inspect and correct or replace as necessary     A : Adjust  
R : Replace or change     T : Tighten to specified torque    L : Lubricate 
 SERVICE INTERVAL:

Page 26 of 6020

ISUZU KB P190 2007  Workshop Repair Manual 0B-8  MAINTENANCE AND LUBRICATION 
  
  
I : Inspect and correct or replace as necessary     A : Adjust  
R : Replace or change     T : Tighten to specified torque    L : Lubricate 
 SERVICE INTERVAL:

Page 213 of 6020

ISUZU KB P190 2007  Workshop Repair Manual 2B-16  SHEET METAL 
  
 
Important Operations - Removal 
1. Radiator Grille 
Refer to the Radiator Grille in this section.  
3. Front wheel extension (W/front wheel extension)  
Refer to the SECTION 1

Page 316 of 6020

ISUZU KB P190 2007  Workshop Repair Manual POWER-ASSISTED STEERING SYSTEM 3B-55 
Check clearance between capsule and bracket. It must  
be less than 1 mm (0.039 in). 
431RW 031
 
Column Universal Joint (between the 
power steering unit and the

Page 317 of 6020

ISUZU KB P190 2007  Workshop Repair Manual 3B-56 POWER-ASSISTED STEERING SYSTEM 
9. Turn the SRS coil fully counterclockwise, return 
about 3 turns and align the neutral mark (1). (with  
SRS air bag) 
CAUTION: When turning the SRS coil fully

Page 332 of 6020

ISUZU KB P190 2007  Workshop Repair Manual 3C-12  FRONT SUSPENSION 
4. Install link nut, then tighten it to the specified
torque. 
Torque: 50 N ⋅
⋅⋅ 
⋅
m (5.1 kgf ⋅
⋅⋅
⋅
m/37 lb ⋅ft) 
5.  Tighten the cam bolt and lower contro

Page 352 of 6020

ISUZU KB P190 2007  Workshop Repair Manual FRONT SUSPENSION  3C-31 
Shock Absorber 
Shock Absorber and Associated Parts 
 RTW 340MF000901 
Legend  
  (1)  Shock Absorber Nut 
  (2)  Rubber Bushing and W asher 
   
  (3) Shock Absorber Bolt and

Page 405 of 6020

ISUZU KB P190 2007  Workshop Repair Manual WHEELS AND TIRES  3E-1 
SECTION 3E 
WHEELS AND TIRES 
TABLE OF CONTENTS 
 PAGE 
Main Data and Specifications ...........................................................................................
Page:   1-10 11-20 21-30 31-40 41-50 ... 70 next >