instrument cluster ISUZU TFS SERIES 1997 Workshop Manual

10-26 CAB
INSTRUMENT PANEL
REMOVAL
2 9
6
715 1013 81211
4
3
Disassembly Steps
1. Center console assembly
2. ECM cover (M/T Remote only)
3. Glove box
4. Glove box cover
5. Instrument panel passenger lower cover
assembly
6. Instrument panel driver lower cover
assembly
7. Lower cluster assembly
8. Meter cluster assembly
9. Instrument panel lower center cover
assembly
10. Control lever assembly
11. Instrument panel assembly
12. Meter assembly
13. Radio assembly

CAB 10-27
Important Operations
1. Center Console Assembly
Remove shift knob and 2 fixing screws (front side).
Open the grommet and remove 2 fixing screws (rear
side).
2. ECM cover
3. Glove Box
Remove 2 fixing screws and pulling the handle.
4. Glove Box Cover
Remove 4 fixing screws and pull the cover toward you
and remove the clips at 2 positions.
5. Instrument Panel Passenger Lower Cover Assembly
Remove 3 fixing screws and 1 clip.
6. Instrument Panel Driver Lower Cover Assembly
Remove the engine hood opener 2 fixing screws and 6
fixing screws.
Disconnect the connector of the illumination.
7. Lower Cluster Assembly
Remove 3 fixing clips.
8. Meter Cluster Assembly
Remove 3 fixing screws, 7 clips and switch connectors.
9. Instrument Panel Lower Center Cover Assembly
Remove 7 fixing screws and disconnect the connector of
the cigarette lighter.

CAB 10-29
INSTALLATION
12
Installation Steps
1. Radio assembly
2. Meter assembly
3. Instrument panel assembly
4. Control lever assembly
5. Instrument panel lower center cover
assembly
6. Meter cluster assembly7. Lower cluster assembly
8. Instrument panel driver lower cover
assembly
9. Instrument panel passenger lower cover
assembly
10. Glove box cover
11. Glove box
12. ECM cover (M/T Remote only)
13. Center console assembly

10-26 CAB
INSTRUMENT PANEL
REMOVAL
2 9
6
715 1013 81211
4
3
Disassembly Steps
1. Center console assembly
2. ECM cover (M/T Remote only)
3. Glove box
4. Glove box cover
5. Instrument panel passenger lower cover
assembly
6. Instrument panel driver lower cover
assembly
7. Lower cluster assembly
8. Meter cluster assembly
9. Instrument panel lower center cover
assembly
10. Control lever assembly
11. Instrument panel assembly
12. Meter assembly
13. Radio assembly

CAB 10-27
Important Operations
1. Center Console Assembly
Remove shift knob and 2 fixing screws (front side).
Open the grommet and remove 2 fixing screws (rear
side).
2. ECM cover
3. Glove Box
Remove 2 fixing screws and pulling the handle.
4. Glove Box Cover
Remove 4 fixing screws and pull the cover toward you
and remove the clips at 2 positions.
5. Instrument Panel Passenger Lower Cover Assembly
Remove 3 fixing screws and 1 clip.
6. Instrument Panel Driver Lower Cover Assembly
Remove the engine hood opener 2 fixing screws and 6
fixing screws.
Disconnect the connector of the illumination.
7. Lower Cluster Assembly
Remove 3 fixing clips.
8. Meter Cluster Assembly
Remove 3 fixing screws, 7 clips and switch connectors.
9. Instrument Panel Lower Center Cover Assembly
Remove 7 fixing screws and disconnect the connector of
the cigarette lighter.

CAB 10-29
INSTALLATION
12
Installation Steps
1. Radio assembly
2. Meter assembly
3. Instrument panel assembly
4. Control lever assembly
5. Instrument panel lower center cover
assembly
6. Meter cluster assembly7. Lower cluster assembly
8. Instrument panel driver lower cover
assembly
9. Instrument panel passenger lower cover
assembly
10. Glove box cover
11. Glove box
12. ECM cover (M/T Remote only)
13. Center console assembly