wheel Lancia Delta 2010 Owner handbook (in English)
[x] Cancel search | Manufacturer: LANCIA, Model Year: 2010, Model line: Delta, Model: Lancia Delta 2010Pages: 276, PDF Size: 5.31 MB
Page 211 of 276

210IN AN EMERGENCY
38
38
38
–
38
38
38
38
38
38
38
38F42
F43
F44
F45
F46
F47
F48
F49
F50
F51
F52
F535
30
15
–
20
20
20
5
7.5
5/7.5 (*)
15
7.5
CONSUMERS FUSE AMPERE DIAGRAM
Brake Node, yaw sensor
Windscreen wiper system on steering wheel interface, bi-directional
windscreen/rearscreen washer pump system on steering wheel interface
Cigar lighter/power socket on tunnel,
luggage compartment power socket
Spare
Sunroof motor
Driver-side front electric window
Passenger-side front electric window
Emergency, right, left and central control panels on radio/
radio-navigator (illumination), steering wheel controls (illumination),
controls on front courtesy light (illumination), volume-sensing
alarm control unit, electric sunroof system (controls illumination
control unit), rain/dusk sensor,
electro-chrome mirror, heated front seats controls
Air Bag Node
Cigar lighter (illumination), cruise control control,
Convergence Node, Parking Sensor Node, AQS sensor, climate control
unit, door mirror adjustment, tyre
pressure detection control unit, Lane assistance Node,
control unit on right-hand gas discharge headlight (*)
Rear wiper system on steering wheel interface
Instrument panel, direction indicators
175-214 Delta 4ed gb 24-02-2010 14:36 Pagina 210
Page 215 of 276

214IN AN EMERGENCY
TOWING THE CAR
The tow ring provided with the car is housed in the tool
box under the luggage compartment mat.
FASTENING THE TOW RING fig. 43-44
Proceed as follows:
❍release cap A;
❍take the tow hook B from its seat in the tool support;
❍tighten the ring on the rear or front threaded pin.
fig. 43L0E0090mfig. 44L0E0091m
Before starting towing operations, turn the ig-
nition key to MAR and then to STOP, without
extracting it. If the key is extracted, the steer-
ing wheel lock will be automatically activated, thus
preventing steering. The power brakes and the elec-
trical power steering will not work while the car is be-
ing towed. More effort on the brake pedal and steer-
ing wheel will therefore be required. Do not use wires
for towing. Do not jerk. Make sure not to damage parts
in contact with the car while towing. Respect the spe-
cific rules of the Highway Code when towing the car
specifically in relation to the towing device and the be-
haviour to maintain on the road. Do not start the en-
gine while towing the car.
175-214 Delta 4ed gb 24-02-2010 14:36 Pagina 214
Page 216 of 276

CARE AND MAINTENANCE215
5
Scheduled maintenance ................................................................. 216
Scheduled maintenance plan ......................................................... 217
Periodic checks .............................................................................. 221
Demanding use of the car............................................................... 221
Checking fluid levels ..................................................................... 223
Air filter ........................................................................................ 230
Pollen filter ................................................................................... 230
Diesel fuel filter ............................................................................. 230
Battery .......................................................................................... 231
Wheels and tyres ........................................................................... 234
Rubber hoses ................................................................................ 236
Windscreen wiper/rear wiper ......................................................... 236
Bodywork...................................................................................... 239
Interiors ......................................................................................... 242
215-242 Delta 3ed gb 11-11-2009 12:14 Pagina 215
Page 232 of 276

CARE AND MAINTENANCE231
5
BATTERY
The battery F-fig, 1-2-3 provided with this vehicle is a
“Reduced maintenance” battery: no top-ups with distilled
water are needed in normal conditions of use.
It should nevertheless be periodically checked by a Lan-
cia Dealership or specialised personnel to check its effi-
ciency.
The battery fluid is poisonous and corrosive.
Avoid contact with the skin and eyes. Keep
naked flames and sources of sparks away
from the battery: risk of explosion and fire.
Running the battery with an excessively low
liquid level will damage the battery beyond
repair and even cause an explosion.
CHANGING THE BATTERY
If required, replace the battery with a genuine spare part
with the same specifications.
If a battery with different specifications is fitted, the ser-
vice intervals given in the “Scheduled Service Plan” will
no longer be valid.
Refer therefore to the instructions provided by the battery
manufacturer.
If the battery is disconnected, the áwarning light will
come on (together with a message in the display) to indi-
cate that the system must be realigned. To switch the
warning light off, carry out the following initialization pro-
cedure:
❍turn the ignition key to the ON position;
❍turn the steering wheel fully both clockwise and anti-
clockwise (to move from the position with the wheels
straight);
❍turn the ignition key to the OFF position and then turn
it back ON.
If the áwarning light does not go out after a few seconds,
seek assistance from a Lancia Dealership.
215-242 Delta 3ed gb 11-11-2009 12:14 Pagina 231
Page 235 of 276

234CARE AND MAINTENANCE
WHEELS AND TYRES
Check the pressure of each tyre, including the spare wheel,
approximately once every two weeks and before starting
a long journey: this check must be performed with the tyre
rested and cold.
It is normal for the pressure to increase when the car is
used; for the correct tyre inflation pressure, see “Wheels”
in chapter “6”.
Incorrect tyre pressure causes abnormal tyre wear fig. 4:
A normal pressure: evenly worn tread;
B low pressure: tread particularly worn on the edges;
C excessive pressure: tread particularly worn in the mid-
dle.
fig. 4L0E0096m
The tyres must be replaced when the tread is less than 1.6
mm thick. In all cases, follow the laws in force in the coun-
try where you are driving.
IMPORTANT NOTES
❍Avoid braking suddenly, burning starts and violent
knocks against the curb, potholes or other obstacles
where possible. Long distances on rough roads may
damage the tyres;
❍check the tyres regularly for cuts on the sides, swelling
or irregular tread wear. Go to a Lancia Dealership if
required;
❍do not overload your car: this may cause serious dam-
age to wheels and tyres;
❍if a tyre is punctured, stop immediately and change it
to avoid damage to the tyre, wheel rim, suspension and
steering system;
215-242 Delta 3ed gb 11-11-2009 12:14 Pagina 234
Page 236 of 276

CARE AND MAINTENANCE235
5
❍the tyre ages even if rarely used. Cracks in the tread and
on the sidewalls are a sign of ageing. Have the tyres
checked by specialised personnel if they have been fit-
ted for longer than 6 years. Remember to check the spare
wheel very carefully;
❍when replacing the tyres, always fit new tyres, avoid-
ing those of dubious origin;
❍if a tyre is changed, also change the inflation valve;
❍to allow even wear between the front and rear tyres,
it is advisable to change them over every 10-15 thou-
sand kilometres, keeping them on the same side of the
car so as not to reverse the direction of rotation.
Remember that the road holding qualities of
your car also depend on the correct inflation
pressure of the tyres.
If the pressure is too low the tyre will get
overheated, with the risk of serious damage
to the tyre.
Avoid moving the tyres from the right side of
the vehicle to the left side and vice versa.
Do not repaint alloy wheel rims at temper-
atures higher than 150°C. The mechanical
characteristics of the wheels might be dis-
rupted.
215-242 Delta 3ed gb 11-11-2009 12:14 Pagina 235
Page 240 of 276

CARE AND MAINTENANCE239
5
BODYWORK
PROTECTION FROM ATMOSPHERIC AGENTS
The main causes of corrosion are the following:
❍atmospheric pollution;
❍salty air and humidity (coastal areas, or hot humid cli-
mates);
❍seasonal environment conditions.
The abrasive action of wind-borne atmospheric dust and
sand, as well as mud and gravel raised by other cars is
also not to be underestimated.
On your car, Lancia has implemented the best manufac-
turing technologies to effectively protect the bodywork
against corrosion.These include:
❍painting products and systems which give the car par-
ticular resistance to corrosion and abrasion;
❍use of galvanised (or pre-treated) steel sheets, with high
resistance to corrosion;
❍spraying the underbody, engine compartment, wheel-
house internal parts and other parts with highly pro-
tective wax products;
❍spraying of plastic parts, with a protective function, in
the most exposed points: underdoor, inner wing parts,
edges, etc.;
❍use of “open” boxed sections to prevent condensation
and pockets of moisture from triggering rust inside.
BODY AND UNDERBODY WARRANTY
Your car is covered by warranty against perforation due
to rust of any original element of the structure or body.
For the general terms of this warranty, refer to the War-
ranty Booklet.
215-242 Delta 3ed gb 11-11-2009 12:14 Pagina 239
Page 244 of 276

TECHNICAL DATA243
6
Identification data ............................................................... 244
Engine codes - bodywork versions........................................ 246
Engine ................................................................................ 247
Fuel system ......................................................................... 249
Transmission ....................................................................... 250
Brakes.................................................................................. 250
Suspension.......................................................................... 251
Steering ............................................................................... 251
Wheels ................................................................................ 252
Dimensions......................................................................... 256
Performance ........................................................................ 257
Weight ................................................................................ 258
Consumables ....................................................................... 260
Fluids and lubricants........................................................... 262
Fuel consumption................................................................ 264
CO
2emissions..................................................................... 266
243-266 Delta 3ed gb 11-11-2009 12:16 Pagina 243
Page 247 of 276

246TECHNICAL DATA
198A4000
198A1000
198A2000
955A4000 (
▲)
844A1000
198A5000
844A2000 (
▲)
844AXA1A 00C
844AXA1A 00D (*)
844AXB1A 01C
844AXB1A 01D (*)
844AXC1A 02E
844AXC1A 02F (*)
844AXF1A 06E (
❏)
844AXF1A 06F (*)
844AXE1A 04C
844AXE1A 04D (*)
844AXD1A 03C
844AXD1A 03D (*)
844AXG1A 08 (
❏)
844AXG1A 08B
ENGINE CODES - BODYWORK VERSIONS
(*) Versions with 18” wheels
(
▲) For versions/markets where applicable
(
❏) Without DPF version
ENGINE CODE BODYWORK VERSION
1.4 Turbo Jet 120 HP
1.4 Turbo Jet 150 HP
1.6 Multijet
1.9 Twin Turbo Multijet
2.0 Multijet
243-266 Delta 3ed gb 11-11-2009 12:16 Pagina 246
Page 252 of 276

TECHNICAL DATA251
6
SUSPENSION
Mc Pherson independent wheel suspension
Interconnected wheels with torsion beam
STEERING
1.4 Turbo Jet - 1.6 Multijet - 1.9 Twin Turbo Multijet - 2.0 Multijet
Gearbox
Parking brake
Rack and pinion with electric steering
10.6/11.2 (*)
(*) With 18” tyres
1.4 Turbo Jet - 1.6 Multijet - 1.9 Twin Turbo Multijet - 2.0 Multijet
Type
Turning circle
(between pavements) m
243-266 Delta 3ed gb 11-11-2009 12:16 Pagina 251