Oil change Lexus ES300 1999 Owner's Manuals (in English)
[x] Cancel search | Manufacturer: LEXUS, Model Year: 1999, Model line: ES300, Model: Lexus ES300 1999Pages: 472, PDF Size: 2.32 MB
Page 240 of 472
AIR CONDITIONING AND AUDIO
220(e) Your automatic changer
20E016±2
If your Lexus is equipped with an automatic changer, it
can play selected discs or continuously play all the discs
set in the magazine.
When you set discs into the magazine, make sure they
face the co
rrect way. If not, the player will display ºERRº
and the disc number.
NOTICE
Never try to disassemble or oil any part of the compact disc player. Do not insert anythingexcept a compact disc into the magazine.
The player is intended for use with 12 cm (4.7 in.) discs
only.
Page 375 of 472
MAINTENANCE
355
Engine compartment
Items listed below should be checked from time to
time, e.g. each time when refueling.
Washer fluid
Make sure there is sufficient fluid in the tank. See page
432 for additional information.
Engine coolant level
Make sure the coolant level is between the ºFULLº and
ºLOWº lines on the see±through reservoir when the
engine is cold. See page 383 for additional information.
Battery
Your Lexus has a maintenance free battery. You do not
have to add distilled water. For longer life of the battery,
however, see page 415 for additional information.
Brake fluid level
Make sure the brake fluid level is correct. See page 391
for additional information.
Engine oil level
Check the level on the dipstick with the engine turned off
and the vehicle parked on a level spot. See page 378 for
additional information.
Power steering fluid level
Check the level through the reservoir. The level should
be in the ºHOTº or ºCOLDº range depending on the fluid temperature. See page 393 for additional information.
Exhaust system
Look
for cracks, holes and loose supports. If you notice
any change in the sound of the exhaust or smell exhaust
fumes, have the cause located and corrected
immediately. (See engine exhaust cautions in Section
3±1.)
Page 391 of 472
62L005±1
Temperature range anticipated before next oil change
ENGINE
371
Oil capacity
Drain and refillwith filter
without filter
Oil grade
Recommended oil viscosity (SAE):
4.7 L (5.0 qt., 4.1 lmp.qt.)
4.5 L (4.8 qt., 4.0 lmp.qt.)
API SJ, ºEnergy±Conservingº multigrade engine oil or
ILSAC multigrade engine oil
± COOLING SYSTEM
Capacity
Coolant type
8.8 L (9.3 qt., 7.7 lmp.qt.)
ºToyota Long Life Coolantº or equivalent
With ethylene±glycol type coolant for a proper
corrosion protection of aluminum components
Do not use alcohol type antifreeze or plain water
alone.
± FUELFuel type
Octane Rating
Only UNLEADED
87 (Research Octane Number 91) or higher
Page 396 of 472
ENGINE
376The amount of engine oil consumed depends on the
viscosity of the oil, the quality of the oil and the way
the vehicle is driven.
More oil is consumed under driving conditions such as
high speeds and frequent acceleration and
deceleration.
A new engine consumes more oil, since its pistons,
piston rings and cylinder walls have not become
conditioned.
When judging the amount of oil consumption, keep
in mind that the oil may have become diluted,
making it difficult to judge the true level accurately.
For example, if a vehicle is used for repeated short trips
and consumes a normal amount of oil, the dipstick may
not show any drop in the oil level at all, even after 1000
km (600 miles) or more. This is because the oil is
gradually
becoming diluted with fuel or moisture, making
it appear that the oil level has not changed.
The diluting ingredients evaporate out when the vehicle
is then driven at high speeds, as on an expressway,
making it appear that oil is excessively consumed after
driving at high speeds.
Importance of engine oil level check
One of the most important points in proper vehicle
maintenance is to keep the engine oil at the optimum
level so that oil function will not be impaired. Therefore,
it is essential that the oil level be checked regularly.
Lexus recommends that the oil level be checked every
time you refuel the vehicle.
NOTICE
Failure to check the oil level regularly could lead to serious engine trouble due to insufficient oil.
For detailed information on oil level check, see
ºChecking the engine oil levelº on page 378.
Page 402 of 472
ENGINE
382
Engine oil selection
Use API SJ, ºEnergy±Conservingº multigrade engine oil
or ILSAC multigrade engine oil.
Recommended viscosity (SAE):
62L005±1
Temperature range anticipated before next oil change
SAE 5W±30 is the best choice for your vehicle, for
good fuel economy, and good starting in cold
weather.
If you use SAE 10W±30 engine oil in extremely low
temperatures, the engine may become difficult to
start, so SAE 5W±30 engine oil is recommended.