display Lexus ES300 2001 s (in English) User Guide

AUDIO
246
Radio operation
(a) Listening to the radio
20E104
Push these buttons to choose either an AM or FM
station.
ªAMº, ªFM1º or ªFM2º appears on the display.

AUDIO
247
20E205
Push this button on the upper side to step up the
station band or on the lower side to step down.
Your radio automatically changes to stereo reception
when a stereo broadcast is received. ªSTº appears on
the display. If the signal becomes weak, the radio
reduces the amount of channel separation to prevent the
weak signal from creating noise. If the signal becomes
extremely weak, the radio switches from stereo to mono
reception. In this case, ªSTº disappears from the
display. (b) Presetting a station

AUDIO
248
20E206
1. Tune in the desired station.
2. Push one of the station selector buttons (1±6) and
hold it until a beep is heard. This sets the station to
the button and the button number (1±6) appears on
the display.
Each button can store one AM station and two FM
stations. To change the preset station to a different one,
follow the same procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown
fuse. (c) Selecting a station
Your Lexus has an electronic tuning radio (ETR). Tune
in the desired station using one of the following methods.

AUDIO
249
20E139
Preset tuning: Push the button (1±6) for the station you
want briefly. The button number (1±6) and station
frequency appear on the display.
Manual tuning: Push the ªTUNE SEEKº button briefly.
Each time you push the button, the radio will step up or
down to another frequency.
Seek tuning: Push the ªTUNE SEEKº button and hold
it until you hear a beep. The radio will begin seeking up
or down for a station of the nearest frequency and will
stop on reception. Each time you push the button, the
stations will be searched out one after another.

AUDIO
250
20E125
To scan all the frequencies: Push the ªSCANº button.
ªSCANº appears on the display. The radio will find the
next station up the band, stay there for a few seconds,
and then scan again. To select a station, push the
ªSCANº button a second time.
To scan the preset stations: Push the ªP.SCANº
button. ªP.SCANº appears on the display. The radio will
tune in the next preset station up the band, stay there for
a few seconds, and then move to the next preset station.
To select a station, push the ªP.SCANº button a second
time.Cassette tape player operation
(a) Playing a cassette tape
20E214

AUDIO
251
When you insert a cassette tape, the exposed tape
should be to the right.
The player will automatically start when you insert a
cassette tape. At this time, ªTAPEº appears on the
display.
If a metal or chrome equivalent cassette
tape is put in the
cassette player, the player will automatically adapt to it
and ªMETALº appears on the display.
To stop or eject the cassette tape, push the ªEJECTº
button.
Auto±reverse feature: After the cassette player
reaches the end of a tape, it automatically reverses and
begins to play the other side, regardless of whether the
cassette was playing or fast forwarding.
20E174

AUDIO
252If a cassette is already in the slot, push the ªTAPEº
button.
Dolby Noise Reduction* feature:
If you are listening to
a tape that was recorded with Dolby* B or C Noise
Reduction, push the button by the double±D symbol until
the appropriate symbol appears on the display.
The Dolby B NR mode reduces tape noise by about 10
dB. The Dolby C NR mode reduces tape noise by
another 10 dB or about 20 dB total. For best sound
reproduction, select the same NR mode that was used
to record the tape.
To play a tape recorded without Dolby NR, push the
button until the symbol disappears from the display.
* Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation. ªDOLBYº and the
double±D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
(b) Manual program selection

AUDIO
253
20E109
ªProgramº button: Push the ª
º button to select
the other side of a cassette tape. The display indicates
which side is currently selected (ª º indicates top side,
ª  º indicates bottom side).
ªRewindº button: Push the ª º button to rewind a
tape. ªREWº appears on the display.
To stop rewinding, push the same button or ªTAPEº
button.
ªFast forwardº button: Push the ª

º button to fast
forward a cassette tape. ªFFº appears on the display.
To stop fast forwarding, push the same button or ªT APEº
button. (c) Automatic program selection

AUDIO
255
20E215
ªAutomatic program selectionº button: The
automatic program selection feature allows you to
program your cassette player to skip forward or
backward to locate the song you want to hear. You can
skip up to nine programs at a time.
Push this button on the upper side to skip forward. ªFFº
and the number will appear on the display. Push the
button until the number you want to skip appears on the
display. After that, the player will automatically skip
forward.
When the end of the tape is reached, the player
automatically reverses sides and resumes normal play.

AUDIO
256Push this button on the lower side to skip backward.
Push the button until ªREWº and the number you want
to skip appear on the display.

If you set ªREW 1º, the player will rewind to the
beginning of the current program.
 When counting the number of programs you want to
rewind, remember to count the current program as
well. For example, if you want to rewind to a song that
is two before the song you are listening to, push this
button until ªREW 3º appears on the display.
When the beginning of the tape is reached, the player
automatically resumes normal play.
There must be at least 3 seconds of blank space
between programs for this feature to work correctly.
ªRPTº, ªSKIPº and ªAutomatic program selectionº
features: These features may not work well with some
spoken word, live or classical recordings.
Compact disc player operation
The compact disc player is an optional accessory that
your vehicle is pre±wired to accept. Although your audio
system has a ªCDº button, your vehicle may or may not
be equipped with a CD player. Please contact your
dealer for additional details if you would like to have the
optional CD player installed.
(a) Inserting compact discs