display Lexus ES300h 2014 Navigation Manual

132
4. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch, then select “Setup”.
2Select “Navigation” on the “Setup”
screen.
3Select “Detailed Navi. Settings” on the
“Navigation Settings” screen.
4Select “Pop-up Information”.
5Select “On” or “Off” .
6Select “Save” .
zWhen “Pop-up Information” is turned off,
the following messages will not be dis-
played.
X This message appears when the map
scale is over 0.5 miles (800 m).
X This message appears when the map is
switched to dual map screen mode.INFORMATION
●
If this procedure is not performed when
the tires are replaced, the current posi-
tion mark may be incorrectly displayed.
POP-UP INFORMATION
When “Pop-up information” is turned
on, pop-up information will be displayed.

133
4. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
2. VEHICLE SETTINGS
1Press the “MENU” button on the
Remote Touch.
2Select “Setup” .
3Select “Vehicle” .
4Select “Maintenance” .
5Select the desired screen button.
zSetting maintenance information. (See
page 133.)
z Setting dealer. (See page 135.)
1Press the “MENU” button on the
Remote Touch, then select “Setup”.
2Select “Vehicle” on the “Setup” screen.
3Select “Maintenance” on the “Vehicle
Settings” screen.
MAINTENANCE
When the navigation system is turned
on, the “Maintenance Reminder” screen
displays when it is time to replace a part
or certain components. (See page 32.)
MAINTENANCE
INFORMATION SETTING

136
4. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
zWhen “Set Dealer” registration is finished,
the “Dealer” screen is displayed.
6Select “Edit” next to the item to be edit-
ed.
■ TO EDIT “Dealer” OR “Contact”
1Select “Edit” next to “Dealer” or “Con-
tact”.
2Enter the name using the alphanumeric
keys.
z Up to 70 characters can be entered for
dealer and 24 characters for contact.
3Select “OK”.
zThe previous screen will be displayed.
No.Function
Select to enter the name of a dealer.
(See page 136.)
Select to enter the name of a dealer
member. (See page 136.)
Select to set the location. (See page
137.)
Select to enter the phone number.
(See page 137.)
Select to delete the dealer informa-
tion displayed on the screen.
Select to set the displayed dealer as a
destination. (See “STARTING
ROUTE GUIDANCE” on page 87.)

137
4. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
■TO EDIT “Location”
1Select “Edit” next to “Location”.
2Select one of the 8 directional screen
buttons to move the cursor to the de-
sired point on the map screen.
3Select “OK”.
zThe previous screen will be displayed.
■ TO EDIT “Phone #”
(PHONE NUMBER)
1Select “Edit” next to “Phone #”.
2Enter the number using number keys.
3Select “OK”.
zThe previous screen will be displayed.

138
4. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Setup” on the “Menu” screen.
3Select “Vehicle” on the “Setup” screen.
4Select “Vehicle Customization” .
5Select the desired items to be set.
zFor a list of the settings that can be
changed, refer to “Owner’s Manual”.
6After changing th e settings, select
“Save” . A message indicating that the
settings are being saved will appear. Do
not perform any other operations while
this message is displayed.
VEHICLE CUSTOMIZATION
Vehicle settings can be changed.
CAUTION
●When performing the customization pro-
cedure, ensure that there is sufficient ven-
tilation in the vehicle and surrounding
area. If there is insu fficient ventilation,
exhaust gases may collect and enter the
vehicle. Exhaust gases include harmful
carbon monoxide (CO) and inhaling
them may lead to death or a serious
health hazard.
INFORMATION
●
To avoid discharging the 12-volt battery,
perform the customization procedure
with the engine running tem operating>.

140
5. GPS (GLOBAL POSITIONING SYSTEM)
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
zAccurate current position may not be
shown in the following cases:
• When driving on a small angled Y-shaped
road.
• When driving on a winding road.
• When driving on a slippery road such as in sand, gravel, snow, etc.
• When driving on a lo ng straight road.
• When freeway and surface streets run in parallel.
• After moving by ferry or vehicle carrier.
• When a long route is searched during high speed driving.
• When driving without setting the current position calibration correctly.
• After repeating a change of direction by going forward and backward, or turning
on a turntable in a parking lot.
• When leaving a covered parking lot or parking garage.
• When a roof carrier is installed.
• When driving with tire chains installed.
• When the tires are worn.
• After replacing a tire or tires.
• When using tires that are smaller or larger than the fact ory specifications.
• When the tire pressure in any of the 4 tires is not correct. z
Inappropriate route guidance may occur in
the following cases:
• When turning at an intersection off the
designated route guidance.
• If you set more than 1 destination but skip any of them, auto reroute will display a
route returning to the destination on the
previous route.
• When turning at an intersection for which there is no route guidance.
• When passing through an intersection for which there is no route guidance.
• During auto reroute, the route guidance may not be available for the next turn to
the right or left.
• During high speed driving, it may take a long time for auto reroute to operate. In
auto reroute, a detour route may be
shown.
• After auto reroute, the route may not be changed.
• If an unnecessary U-turn is shown or announced.
• If a location has multiple names and the system announces 1 or more of them.
• When a route cannot be searched.
• If the route to your destination includes gravel, unpaved roads or alleys, the route
guidance may not be shown.
• Your destination point might be shown on the opposite side of the street.
• When a portion of the route has regula- tions prohibiting the entry of the vehicle
that vary by time or season or other rea-
sons.
• The road and map data stored in the navi- gation system may not be complete or
may not be the latest version.
z If the vehicle cannot receive GPS signals,
the current position can be adjusted
manually. For information on setting the
current position calibration, see page
130.

141
5. GPS (GLOBAL POSITIONING SYSTEM)
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
zAfter replacing a tire, implement the
operation described in “TIRE CHANGE
CALIBRATION”. (See page 131.)
INFORMATION
●
This navigation system uses tire turning
data and is designed to work with factory-
specified tires for the vehicle. Installing
tires that are larger or smaller than the
originally equipped diameter may cause
inaccurate display of the current position.
The tire pressure also affects the diame-
ter of the tires, so make sure that the tire
pressure of all 4 tires is correct.

4
143
1
2
3
4
5
6
7
8
9
ES350/300h_Navi_OM33A66U_(U)13.07.11 09:52
10
1. QUICK REFERENCE ............................ 144
2. PHONE (HANDS-FREE SYSTEM FOR CELLULAR PHONE)................ 146
USING THE PHONE SWITCH ........................ 147
USING THE STEERING SWITCHES ............ 148
ABOUT THE PHONEBOOK IN THIS
SYSTEM .................................................................... 149
WHEN SELLING OR DISPOSING OF THE VEHICLE ....................................................... 149
3. REGISTER A Bluetooth® PHONE..... 152
CONNECTING A Bluetooth® PHONE ..... 154
RECONNECTING THE Bluetooth®
PHONE ..................................................................... 156
4. CALL ON THE Bluetooth®
PHONE..................................................... 157
BY DIAL ........................................................................ 157
BY PHONEBOOK ................................................. 157
BY SPEED DIAL ....................................................... 159
BY CALL HISTORY ............................................... 160
BY VOICE RECOGNITION.............................. 161
CALLING USING AN SMS/MMS
MESSAGE ............................................................... 164
BY POI* CALL .......................................................... 164
5. RECEIVE ON THE Bluetooth®
PHONE..................................................... 165
6. TALK ON THE Bluetooth
®
PHONE...................................................... 166
WHEN YOU SELECT “0-9” .............................. 166
INCOMING CALL WAITING ......................... 168
7. Bluetooth® PHONE MESSAGE
FUNCTION............................................. 169
CHECKING MESSAGES ................................... 169
REPLYING (QUICK REPLY) ............................ 170
NEW MESSAGE NOTIFICATION.................. 171
1. PHONE SETTINGS ................................. 172
PHONE SOUND SETTINGS ............................ 172
PHONEBOOK ......................................................... 174
MESSAGE SETTINGS .......................................... 187
PHONE DISPLAY SETTINGS ........................... 191
2. Bluetooth® SETTINGS ........................... 194
REGISTERED DEVICES ...................................... 194
SELECTING A Bluetooth® PHONE.............. 198
SELECTING PORTABLE PLAYER .............. 200
DETAILED Bluetooth
® SETTINGS ................. 201
1PHONE OPERATION
2SETUP
PHONE
*: Point of Interest

145
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
No.NameFunction
The condition
of Bluetooth®
connection
No connection Good
An antenna for the Bluetooth® connection is built in the instrument
panel. The conditio n of the Bluetooth® connection may deteriorate
and the system may not function when a Bluetooth® phone is used in
the following conditions and/or places:
• The cellular phone is obstructed by certain objects (such as when
it is behind the seat or in the glove box and console box).
• The cellular phone touches or is covered with metal materials.
Leave the Bluetooth
® phone in a place where the condition of the
Bluetooth® connection is good.
When the cellular phone is not connected, “No Connect” is dis-
played.
The amount of
battery charge
leftEmpty Full
This is not displayed when the Bluetooth® is not connected.
The amount displayed does not al ways correspond with the amount
displayed on the cellular phone. Th e amount of battery charge left
may not be displayed depending on the type of phone you have. This
system does not have a charging function.
The receiving
area“Rm” is displayed when receiving in a roaming area.
The receiving area may not be displayed depending on the type of
phone you have.
The level of
receptionPoor Excellent
The level of reception does not alwa ys correspond with the level dis-
played on the cellular phone. The level of reception may not be dis-
played depending on the phone you have.
When the cellular phone is out of th e service area or in a place inac-
cessible by radio waves, “No Service” is displayed.

152
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3. REGISTER A Bluetooth® PHONE
1Press the “MENU” button on the
Remote Touch.
2Select “Phone” .
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
3Select “Yes” to register a phone.
zIf 5 Bluetooth® devices have already been
registered, a registered device needs to be
deleted. See “When 5 Bluetooth
® devices
have already been registered” on page
153.
4When this screen is displayed, operate
the Bluetooth
® device.
z Search for the navigation system displayed
on the system’s screen using your
Bluetooth
® device, and register the
Bluetooth® device.
For details about operating the Bluetooth®
device, see the manual that comes with it.
z A passcode is not required for SSP (Secure
Simple Pairing) compatible Bluetooth
®
phones. Depending on the type of
Bluetooth® phone being connected, a
message confirming registration may be
displayed on the Bluetooth
® phone’s
screen. Respond and operate the
Bluetooth
® phone according to the confir-
mation message.
To use the hands-free system, it is neces-
sary to register a phone with the system.
Once the phone has been registered, it
is possible to make a hands-free call.
If a Bluetooth
® phone has not been reg-
istered yet, it is necessary to register it
first according to the following proce-
dure. A Bluetooth
® phone cannot be
registered while driving.
z See “REGISTERING A Bluetooth®
DEVICE” on page 195 of additional reg-
istration when registering.