display Lexus ES300h 2014 Navigation Manual

153
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
zTo cancel the registration, select “Cancel”.
z If the Bluetooth
® phone to be registered
has a Bluetooth® audio function, this can
be registered at the same time.
5This screen will be displayed when reg-
istration is complete.
z When using the same phone, it is not nec-
essary to register it again.
X When this screen is displayed, follow the
guidance on the screen to try again.
X When another Bluetooth
® device is con-
nected
z When another Bluetooth® device is cur-
rently connected, this screen is displayed.
z To disconnect the Bluetooth
® device,
select “Yes” .
XWhen 5 Bluetooth® devices have al-
ready been registered
1When 5 Bluetooth® devices have al-
ready been registered, a registered de-
vice needs to be deleted. Select “Yes” to
delete 1 or more.
2Select the device to be deleted, then se-
lect “Remove” .
3Select “Yes”.
X If the Bluetooth
® phone has a
Bluetooth® audio function
z When the Bluetooth® phone to be regis-
tered has a Bluetooth® audio function, this
audio function will be registered automati-
cally at the same time and this screen may
be displayed. If this screen is displayed,
select “Yes” to connect the audio function
or select “No” to cancel the connection.

154
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
zFor automatic connection, see “CHANG-
ING “Bluetooth* Power”” on page 202.
z When the “START STOP ENGINE”
<“POWER”> switch is in ACCESSORY or
IGNITION ON mode, the system
searches for a nearby registered cellular
phone.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
z The system will connect with the phone that
was last connected, if it is nearby.
When “Display Phone Status” is set to
“On” , the connection status is displayed.
(See “Bluetooth
® DEVICE CONNEC-
TION STATUS DISPLAY SETTINGS” on
page 204.)
z This screen appears when the Bluetooth
®
phone is first connected after the “START
STOP ENGINE” <“POWER”> switch is in
ACCESSORY or IGNITION ON
mode.
CONNECTING A Bluetooth®
PHONE
AUTOMATICALLY
When a phone is registered, auto con-
nection is turned on. Always set it to this
mode and leave the Bluetooth
® phone
in a location where connection can be
established.
INFORMATION
●
It may take time if the phone connection
is carried out during Bluetooth® device
playback.
Depending on the type of Bluetooth
®
phone being connected, it may be neces-
sary to perform additional steps on the
phone.

155
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Connect Phone” .
3Select the screen bu tton corresponding
to the desired phone connection.
z When the cellular phone’s device name has
not been able to be obtained, “Device 1” to
“Device 5” will be displayed in the order the
phones were registered.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
4This screen is displayed.
5When the connection is completed, this
screen is displayed.
z Now you can use the Bluetooth® phone.
X When a phone is connected while
Bluetooth® audio is playing
zThis screen is displayed, and the
Bluetooth® audio will stop temporarily.
MANUALLY
When the auto connection has failed or
“Bluetooth* Power” is turned off, it is
necessary to connect Bluetooth
® man-
ually.

156
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
zIf a Bluetooth® phone is disconnected on
purpose, such as turning it off, this does not
happen. Reconnect the Bluetooth
® phone
manually.
RECONNECTING THE
Bluetooth® PHONE
If a Bluetooth® phone is disconnected
due to poor reception from the
Bluetooth
® network when the “START
STOP ENGINE” <“POWER”> switch is
in ACCESSORY or IGNITION ON
mode, the system automatically
reconnects the Bluetooth
® phone.
When “Display Phone Status” is set to
“On” , the connection status is displayed.

157
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
4. CALL ON THE Bluetooth® PHONE
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Phone” on the “Menu” screen.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
3Select the desired keys to input the
phone number.
zEach time is select ed, an input digit is
deleted.
4Select or press the switch on
the steering wheel.
z Depending on the type of Bluetooth®
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
1Select “Contacts” .
2Select the desired data from the list.
After a Bluetooth® phone has been reg-
istered, a call can be made using the
hands-free system. There are 7 methods
by which a call can be made. These are
described below.
BY DIAL
A call can be made by inputting the
phone number.
This cannot be operated while driving.
BY PHONEBOOK
Calls can be made by using the phone-
book data which is transferred from the
registered cellular phone.
The phonebook changes depending on
the phone connected. Up to 1000 con-
tacts (maximum of 3 numbers per con-
tact) can be regi stered in each
phonebook.
This cannot be operated while driving.

159
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4When the data transfer from a PBAP in-
compatible but OPP compatible model
is complete, “Done” will appear on the
screen. Select “Done”.1Select “Speed Dials” .
2Select the desired number to call.
zThe list to be displayed can be changed by
selecting the “Speed Dial 1” , “Speed Dial
2” or “Speed Dial 3” tab.
INFORMATION
●
Depending on the type of Bluetooth®
phone:
• It may be necessary to perform addi- tional steps on the phone when transfer-
ring phonebook data.
• The registered image on the phone- book may not appe ar when phonebook
data is transferred.
BY SPEED DIAL
Calls can be made using registered
phone numbers which can be selected
from a phonebook. (See “REGISTER-
ING THE SPEED DIAL” on page 183
for registering the speed dial.)
This can be operated while driving.

160
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Select “Call History” .
2Select the desired data from the list.
zThe list to be displayed can be changed by
selecting the “All”, “Missed” , “Incoming” or
“Outgoing” tab.
3Select or press the switch on
the steering wheel.BY CALL HISTORY
CALLS CAN BE MADE BY
CALL HISTORY WHICH HAS 4
FUNCTIONS
All : all calls (missed, incoming or outgo-
ing)
Up to 25 call history items can be select-
ed from the “A l l ” tab while driving.
Missed: calls that were missed
Incoming : calls that were received
Outgoing : calls that were made

161
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Press the switch on the steering
wheel to display the “Call History”
screen.
3Press the switch on the steering
wheel to select the latest history item.
4Select or press the switch on
the steering wheel to call the latest his-
tory item.
zWhen making a call by phonebook, the
name (if registered) is displayed.
z When making a call to the same number
continuously, only the most recent call is
listed in call history.
z When a phone number registered in the
phonebook is received, the name and the
number are displayed.
z Number-withheld calls are also memorized
in the system.
z International phone calls may not be made
depending on the type of cellular phone
you have.
CALLS CAN BE MADE USING
THE LATEST CALL HISTORY
ITEMBY VOICE RECOGNITION
Calls can be made by giving a voice
command. (For the operation and com-
mand of voice recognition, see “VOICE
COMMAND SYSTEM” on page 308.)
This can be operated while driving.

162
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the talk switch.
z“Call ” is displayed in the
“Shortcut Menu” screen.
z When “Call ” on the “Short-
cut Menu” screen is dimmed, the phone-
book’s voice command recognition cannot
be used. Check the Bluetooth
® connec-
tion and if the contacts have been trans-
ferred to the navigation system.
2Say the name, or the name and type of
phone, of a registered contact.
z In the same manner as it is displayed on the
screen, “Call ”, after saying
“Call” say the name, or the name and type
of phone, of a contact.
For example: “Call” , “John Smith” or “Call” ,
“Mary Davis” , “Mobile”
z There are 4 types of phones: Home,
Mobile, Office and Other.
z Short or abbreviated names in the phone-
book may not be recognized. Change
names in the phonebook to full names.
z Sometimes a voice recognition result con-
firmation screen will be displayed. After
confirming the result, say “Yes” or “No” .
z When the system recognizes multiple
names from the phoneb ook, a name candi-
date list will be displayed on the screen. If
the desired name is not displayed on the
top of the screen, say the number of the
name from the candidate list (number 1 and
number 2) to select a name from the candi-
date list. z
When a contact has multiple phone num-
bers registered in the phonebook, a candi-
date list will be displa yed. If the desired
phone number is not displayed on the top
of the screen, say the number of the desired
phone number from the candidate list
(number 1 and number 2) to select a phone
number from the candidate list.
3Say “Dial” to call the phone number.
1Press the talk switch.
z“Dial ” is displayed in the “Short-
cut Menu” screen.
z When “Dial ” on the “Shortcut
Menu” screen is dimmed, the phone num-
ber voice recognitio n cannot be used.
Check the Bluetooth
® phone connection.
2Say the phone number.
z In the same manner as it is displayed on the
screen, “Dial ”, after saying “Dial”
say the phone number.
z Say the phone number one digit at a time.
For example, if the phone number is
2345678:
Say “two three four five six seven eight”
Do not say “twenty three forty five sixty
seven eight”
VOICE COMMAND
EXAMPLE: CALL NAME
VOICE COMMAND
EXAMPLE: DIAL NUMBER

163
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
zThe system can recognize the following
types of phone numbers:
3 digit numbers (911, 411, 611)
7 digit numbers (Local phone numbers)
10 digit numbers (Area code + Local
phone number)
11 digit phone numbers (1 + Area code +
Local phone number)
z As the system cannot recognize additional
numbers, say the complete number without
stopping.
z When the system recognizes multiple
phone numbers, a phone number candi-
date list will be displayed on the screen. If
the desired phone number is not displayed
on the top of the screen, say the number of
the desired phone number from the candi-
date list (number 1 and number 2) to select
a phone number from the candidate list.
3Say “Dial” to call the phone number.
■INTERNATIONAL CALL
1Go to the “Main Menu” screen by
pressing the talk sw itch on the steering
wheel and saying “Main menu ” or select
“Main Menu” .
2Say “Use a phone” .
3Say “International call” .
zUp to 24 digits can be recognized when
using the internationa l call function. The
number can also be divided into multiple
groups and recognized.
To dial a phone number that is not a 3, 7,
10 or 11 digit number, for example an in-
ternational number, use “International
Call”.
Calling without the voice recognition :
After the desired ph one number is dis-
played, a call can also made by pressing
the switch on the steering wheel.
Canceling the voice recognition : The
voice recognition will be canceled when
either of the following is performed:
• Press and hold the talk switch.
• Select “Cancel” .