check engine light Lexus GS300 1995 Chassis

CHASSIS
188
CHECKING BRAKE FLUID
Brake fluid reservoir
with traction control system
Brake fluid reservoir
Maximum
level line
Brake fluid reservoir
Maximum level line
Brake fluid reservoir
without traction control system
To check the fluid level, simply look at the see−through
reservoir. The level should be between the “MAX” and
“MIN” lines on the tank.It is normal for the brake fluid level to go down slightly as the
brake pads wear. So be sure to keep the reservoir filled.
If the reservoir needs frequent refilling, it may indicate a
serious mechanical problem.
If the level is low, add FMVSS No.116 DOT 3 or SAE J1703
brake fluid to the brake reservoir.
Remove and replace the reservoir cover by hand. Add brake
fluid up to the “MAX” line.
Use only newly opened brake fluid. Once opened, brake fluid
absorbs moisture from the air, and excess moisture can cause
a dangerous loss of braking efficiency.
CAUTION:
Take care when filling the reservoir because brake fluid
can harm your eyes and damage painted surfaces. If fluid
gets in your eyes, flush your eyes with clean water.
NOTICE (For vehicles with traction control system only):
Idle the engine while pouring brake fluid into the
reservoir.