173
1. BASIC OPERATION
IS250/350_Navi_U
AUDIO/VISUAL SYSTEM
4
1Press the “” button and remove the
disc.
1Press the button to release the lock and
lift the armrest.
2Open the cover and connect a device.
z Turn on the power of the device if it is not
turned on.
3Close the console box.
EJECTING A DISC
NOTICE
● Never try to disassemble or oil any part
of the DVD player. Do not insert anything
other than a disc into the slot.
INFORMATION
● The player is intended for use with 4.7 in.
(12 cm) discs only.
● When inserting a disc , gently insert the
disc with the label facing up.
USB/AUX PORT
There are 2 USB ports and an AUX port
in the console box.
174
1. BASIC OPERATION
IS250/350_Navi_U
1Select .
INFORMATION
●To fully close the console box with the
cable routed to outside the console box,
insert the cable into the holder.
● Up to two portable players can be con-
nected to the USB port at the same time.
SOUND SETTINGS
DSP CONTROL
207
3. MEDIA OPERATION
IS250/350_Navi_U
AUDIO/VISUAL SYSTEM
4
2. DVD
For safety reasons, the DVD video discs can only be viewed when the following con-
ditions are met:
(a) The vehicle is completely stopped.
(b) The engine switch is in ACCESSORY or IGNITION ON mode.
(c) The parking brake is applied.
While driving in DVD video mode, only the DVD’s audio can be heard.
The playback condition of some DVD discs may be determined by the DVD software
producer. This DVD player plays a disc as the software producer intended. As such,
some functions may not work properly. Be sure to read the instruction manual that
comes with the individual DVD disc. ( →P. 249)
OVERVIEW
The DVD operation screen can be reached by the following methods:
XInserting a disc ( →P. 172)
X Using the instrument panel
Press the “MEDIA” button to display the audio control screen.
XUsing the Remote Touch
Press the “MENU” button on the Remote Touch, then select “Media” to display the
audio control screen.