Oil grade Lexus IS300h 2014 Owner's Manual

563
9 9-1. Specifications
Vehicle specifications
IS300h_EE(OM53C61E)
■Oil capacity (Drain and refill [Reference*])
*: The engine oil capacity is a reference quantity to be used when changing the engine
oil. Warm up the engine and turn off the hybrid system, wait more than 5 minutes, and
check the oil level on the dipstick.
■Engine oil selection
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Lexus recom-
mends the use of approved “Toyota Genuine Motor Oil”. Another motor oil of
matching quality can also be used.
Oil grade:
0W-20, 5W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-Conserving” or SN
“Resource-Conserving”; or ILSAC multigrade engine oil
1 5 W- 4 0 a n d 2 0 W- 5 0 :
API grade SL, SM or SN multigrade engine oil
Recommended viscosity (SAE):
SAE 0W-20 is filled into your Lexus
vehicle at manufacturing, and the
best choice for good fuel economy
and good starting in cold weather.
If SAE 0W-20 oil is not available,
SAE 5W-30 oil may be used. How-
ever, it should be replaced with SAE
0W-20 at the next oil change.
If you use SAE 10W-30 or a higher
viscosity engine oil in extremely low
temperatures, the engine may
become difficult to start, so SAE
0 W-20, 5W-20 or 5W-30 engine
oil is recommended.
Lubrication system
With filter4.5 L (4.8 qt., 4.0 Imp. qt.)
Without filter4.1 L (4.3. qt., 3.6 Imp. qt.)
Temperature range anticipated
before next oil change.Preferred
IS300h_EE_OM53C61E.book 563 ページ ２０１４年５月２０日　火曜日　午後５時４０分

5649-1. Specifications
IS300h_EE(OM53C61E)
Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the characteristic of the oil which allows cold
startability. Oils with a lower value before the W allow for easier starting of
the engine in cold weather.
• The 20 in 0W-20 indicates the viscosity characteristic of the oil when the
oil is at high temperature. An oil with a higher viscosity (one with a higher
value) may be better suited if the vehicle is operated at high speeds, or
under extreme load conditions.
How to read oil container labels:
Either or both API registered marks are added to some oil containers to help
you select the oil you should use.
API Service Symbol
Top portion: “API SERVICE SN”
means the oil quality designation by
American Petroleum Institute (API).
Center portion: “SAE 0W-20”
means the SAE viscosity grade.
Lower portion: “Resource-
Conserving” means that the oil has
fuel-saving and environmental pro-
tection capabilities.
ILSAC Certification Mark
The International Lubricant Specification Advisory Committee (ILSAC) Certifica-
tion Mark is displayed on the front of the container.
1
2
IS300h_EE_OM53C61E.book 564 ページ ２０１４年５月２０日　火曜日　午後５時４０分

612
IS300h_EE(OM53C61E)GAS STATION INFORMATION
Auxiliary catch leverTrunk openerFuel filler door
P. 437 P. 143 P. 241
Hood lock release leverTi r e i n f l a t i o n p r e s s u r e
P. 4 3 7
P. 5 6 8
Fuel tank capacity
(Reference)66 L (17.4 gal., 14.5 Imp. gal.)
Fuel typeEU area: Unleaded gasoline conforming to European
standard EN228 only
Except EU area: Unleaded gasoline only
P. 2 4 1 , 5 6 2
Cold tire inflation
pressureP. 5 6 8
Engine oil capacity
(Drain and refill —
reference)L (qt., Imp. qt.)
With filter 4.5 (4.8, 4.0)
Without filter 4.1 (4.3, 3.6)
Engine oil type“Toyota Genuine Motor Oil” or equivalent
Oil grade:
0W-20, 5W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-Con-
serving” or SN “Resource-Conserving”; or ILSAC multi-
grade engine oil
1 5 W- 4 0 a n d 2 0 W- 5 0 :
API grade SL, SM or SN multigrade engine oil
P. 5 6 3
IS300h_EE_OM53C61E.book 612 ページ ２０１４年５月２０日　火曜日　午後５時４０分