center LEXUS RX270 2014 User Guide

162
1-7. Safety information
RX350/270_EE
CAUTION
■When installing a child restraint system
●If child restraint system regulations exist in the country where you reside, please
contact any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional for the child restraint system installation.
●When a junior seat is installed, always ensure that the shoulder belt is positioned
across the center of the child's shoulder. The belt should be kept away from the
child's neck, but not so that it could fall off the child's shoulder. Failing to do so
may result in death or serious injury in the event of sudden braking, sudden
swerving or an accident.
●Ensure that the belt and tab are securely locked and the seat belt is not twisted.
●Shake the child restraint system left and right, and forward and backward to
ensure that it has been securely installed.
●After securing a child restraint system, never adjust the seat.
●Follow all installation instructions provided by the child restraint system manufac-
turer.
■To correctly attach a child restraint system to the anchors
When using the lower anchors, be sure that there are no foreign objects around the
anchors and that the seat belt is not caught behind the child restraint system. Make
sure the child restraint system is securely attached, or it may cause death or serious
injury to the child or other passengers in the event of a sudden stop, sudden swerve
or accident.
RX350_270_EE_48D77E.book 162 ページ ２０１４年１月２４日　金曜日　午前１０時４分

198
2-2. Instrument cluster
RX350/270_EE
Indicators and warning lights
The indicator and warning lights on the instrument cluster and center
panel inform the driver of the status of the vehicle’s various systems.
For the purpose of explanation, the following illustration displays all indica-
tors and warning lights illuminated.
■Instrument cluster
RX350_270_EE_48D77E.book 198 ページ ２０１４年１月２４日　金曜日　午前１０時４分

199
2-2. Instrument cluster
2
When driving
RX350/270_EE
■Center panel
Without a navigation system
With a navigation system
RX350_270_EE_48D77E.book 199 ページ ２０１４年１月２４日　金曜日　午前１０時４分

217
2
When driving
RX350/270_EE
2-3. Operating the lights and windshield wipers
Headlight switch
Turning on the high beam headlights
With the headlights on, push the
lever away from you to turn on
the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you to turn
on the high beams.
Release the lever to turn them off.
You can flash the high beams with
the headlights on or off.
The headlights can be operated manually or automatically.
Turning the end of the lever turns on the lights as follows:
Off
The headlights and
front position lights
turn on and off auto-
matically.
(When the “ENGINE
START STOP” switch
is in IGNITION ON
mode)
The front position, tail,
license plate and
instrument panel lights
turn on.
The headlights and all
lights listed above turn
on.
RX350_270_EE_48D77E.book 217 ページ ２０１４年１月２４日　金曜日　午前１０時４分

248
2-4. Using other driving systems
RX350/270_EE
Lexus parking assist-sensor∗
The distance to obstacles measured by the sensors is communicated via
the multi-information display and a buzzer when parallel parking or
maneuvering into a garage is conducted. Always check the surrounding
area when using this system.
■Types of sensors
Front corner sensors
Front center sensors
Rear corner sensors
Rear center sensors
■Setting the Lexus parking assist-sensor mode
Press the menu switch.
The multi-information display
will change modes to elec-
tronic features control mode.
Press the “∧” or “∨” switch
until the Lexus parking assist-
sensor mark appears in the
multi-information display.
STEP1
∗: If equipped
RX350_270_EE_48D77E.book 248 ページ ２０１４年１月２４日　金曜日　午前１０時４分

249
2-4. Using other driving systems
2
When driving
RX350/270_EE
Display
When the sensors detect an obstacle, a graphic is shown on the multi-
information display depending on the position and distance to the obsta-
cle.
Front corner sensor operation
Front center sensor operation
Rear corner sensor operation
Rear center sensor operation
Press the “ENTER” switch to
change to “ON”.
The Lexus parking assist-sensor
indicator will be displayed.
Each pressing of the switch
turns the Lexus parking assist-
sensor on and off.
When on, the buzzer sounds to
inform the driver that the system
is operational.
Press the menu switch to
change to the normal display.
STEP2
RX350_270_EE_48D77E.book 249 ページ ２０１４年１月２４日　金曜日　午前１０時４分

251
2-4. Using other driving systems
2
When driving
RX350/270_EE■Front center sensors
■Rear corner sensors
Detection
levelMulti-information
displayApproximate dis-
tance to obstacleBuzzer
1100 to 50 cm
(3.3 to 1.6 ft.)Slow
250 to 40 cm
(1.6 to 1.3 ft.)Medium
340 to 30 cm
(1.3 to 1.0 ft.)Fa st
430 cm (1.0 ft.) or
lessContinuous
Detection
levelMulti-information
displayApproximate dis-
tance to obstacleBuzzer
250 to 37.5 cm
(1.6 to 1.2 ft.)Medium
337.5 to 25 cm
(1.2 to 0.8 ft.)Fa st
425 cm (0.8 ft.) or
lessContinuous
RX350_270_EE_48D77E.book 251 ページ ２０１４年１月２４日　金曜日　午前１０時４分

252
2-4. Using other driving systems
RX350/270_EE■Rear center sensors
Detection
levelMulti-information
displayApproximate dis-
tance to obstacleBuzzer
1150 to 60 cm
(4.9 to 2.0 ft.)Slow
260 to 45 cm
(2.0 to 1.5 ft.)Medium
345 to 35 cm
(1.5 to 1.2 ft.)Fa st
435 cm (1.2 ft.) or
lessContinuous
RX350_270_EE_48D77E.book 252 ページ ２０１４年１月２４日　金曜日　午前１０時４分

253
2-4. Using other driving systems
2
When driving
RX350/270_EE
Detection range of the sensors
Approximately 100 cm (3.3 ft.)
Approximately 150 cm (4.9 ft.)
Approximately 50 cm (1.6 ft.)
The diagram shows the detection
range of the sensors. Note that the
sensors cannot detect obstacles
that are extremely close to the
vehicle.
The range of the sensors may
change depending on the shape of
the object etc.
■The Lexus parking assist-sensor can be operated when
●Front corner sensors:
• The “ENGINE START STOP” switch is in IGNITION ON mode.
• The shift lever is in a position other than P.
• The vehicle speed is less than about 10 km/h (6 mph).
●Front center sensors:
• The “ENGINE START STOP” switch is in IGNITION ON mode.
• The shift lever is in a position other than P or R.
• The vehicle speed is less than about 10 km/h (6 mph).
●Rear corner and center sensors:
• The “ENGINE START STOP” switch is in IGNITION ON mode.
• The shift lever is in R.
RX350_270_EE_48D77E.book 253 ページ ２０１４年１月２４日　金曜日　午前１０時４分

261
2-4. Using other driving systems
2
When driving
RX350/270_EE
CAUTION
■The electronically modulated air suspension must be turned off when
The electronically modulated air suspension must be turned off in the following situ-
ations as vehicle height may change due to the automatic leveling function, and, you
may catch part of your body in the vehicle and cause an accident, resulting in death
or serious injury.
●Any of the wheels is stuck in a ditch.
●It is necessary to jack up the vehicle.
●It is necessary to tow the vehicle with part of it lifted.
●When connecting/disconnecting a trailer
For safety, stop the engine if necessary.
■“HI” mode
●“HI” mode should only be used when driving on rough roads, for example when
driving off-road. Because the vehicle's center of gravity will become higher when
in the mode, the vehicle may become unstable when turning abruptly and cause
an accident, resulting in death or serious injury.
●Do not select “HI” mode when loading cargo on the roof luggage carrier.
Because the vehicle's center of gravity will become higher when in the mode, the
vehicle may become unstable when turning abruptly, and cause an accident,
resulting in death or serious injury.
RX350_270_EE_48D77E.book 261 ページ ２０１４年１月２４日　金曜日　午前１０時４分