light MAZDA CX90 2024 Owners Manual

Independent mode (indicator light
turned off)
The set temperature can be controlled
independently for the driver's side and
front passenger's side.
Press the driver’s side temperature
setting switch or the front passenger’s
side temperature setting switch to
control the temperature.
Interconnection mode (indicator light
turned on)
The set temperature for the driver's
side and front passenger's side is
controlled simultaneously.
Press the driver's side temperature
setting switch to control the
temperature.
NOTE
The set temperature for the front
passenger's side and the rear (while
the rear climate control system is
ON) changes to that of the driver
when independent mode is switched
to interconnection mode.
When the front passenger’s side
temperature setting switch or the
rear temperature setting switch is
pressed while in interconnection
mode (SYNC switch indicator light
turned on), the mode switches to
independent mode (SYNC switch
indicator light turned off).
A/C switch
The cooling/dehumidifying function
switches between on and off each time
the switch is pressed. The indicator
light turns on while the function is
operating.
NOTE
The air conditioner may not operate
when the ambient temperature falls to
nearly 0 ℃ to protect the system.
Rear window defogger switch
Use to defog the rear window.
Refer to How to Use the Rear Window
Defogger Switch on page 5-79.
Air intake selector switch
The mode is switched between
recirculate mode and fresh air mode
each time the switch is pressed.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Front)
6-9
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to decrease the airflow amount
The airflow amount changes each time
the switch is pressed. The airflow
amount is indicated on the display.
The airflow amount can be adjusted to
7 levels.
Climate control system power switch
(system on/off)
Switches the climate control system on
and off.
The indicator light turns on while the
function is operating.
Windshield defroster switch
Use to defrost the windshield and front
windows.
Automatically switches to fresh air
mode. The indicator light turns on.
WARNING
Do not lower the airflow temperature
when defrosting the windshield.
Otherwise, the outer side of the
windshield will frost causing reduced
visibility which may lead to an
accident.
NOTE
For faster defrosting , do any of the
following operations.
Operate the fan switch and
increase the airflow amount.
Press the temperature setting
switch to increase the airflow
temperature.
Be careful that the windows do not
fog up when doing any of the
following operations.
Switch to recirculate mode.Tu r n o ff t h e a i r co n d i t i o n e r.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Front)
6-11
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

During the cabin preconditioning
operation, the cooling fan, the
compressor, and the cabin fans
operate, but this does not indicate a
problem.
 The climate control system functions
you can use
differ depending on the
vehicle power position.
Function Vehicle power position
OFF ACC ON
(Hy- brid sys-
tem off) ON
(Hy- brid sys-
tem on)
Air circulation — — X X
Cooling/heating — — X
*1X
Climate Control
Timer X———
Remote climate
control X———
X: Available
—: Not available
*1 The cooling/heating function can
be used only while charging.
NOTE
The recommended set temperature
is 22 °C (72 °F). If you set an
extremely high or low temperature,
power consumption will increase
and the charging time will take
longer.
If you operate the cabin
preconditioning while the charge
connector is connected, you can
reduce the electric power
consumption of the high voltage
battery.
While the cabin preconditioning is
operating , the indicator light for the
climate control power switch turns
on.
The cabin preconditioning operates
for 20 minutes. If you set the
departure time using the climate
control timer, set it 20 minutes or
later from the current time and if you
want to make several settings, space
them out at intervals of 30 minutes
or longer.
How to set the Climate Control Timer
1. Select “Settings” from the Mazda Connect home screen.
2. Select “EV Settings”.
3. Select “Climate Control Timer”.
4. Select the item setting you would like to change from the displayed
content.
5. Switch the vehicle power OFF.
Climate Control Timer
Allows climate control to adjust cabin
temperature before driving.
Function Available setting changes
1 ---
Enable,
Disable
*1Edit,
Delete*2
2 ---
3 ---
4 ---
5 ---
6 ---
7 ---
*1 If an item selected using the cursor has been set, the item can be
enabled or disabled.
*2 Settings can be “Edit”/“Delete” bysliding an item selected using the
cursor to the right.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Front)
6-13
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the FullyAutomatic Climate Control System
(Operation from front seats)
1. Start the hybrid system.
2. Turn the front climate control system on.
3.
The indicator light turns on.
NOTE
When the rear climate control
system is turned on using the Rear
climate control system power
switch, each setting is the setting
before the rear climate control
system was turned off.
4.
The indicator light turns on and the
screen changes to the rear climate
control system operation screen.
5. Press the temperature setting switch to set the desired temperature.
Each function is automatically
controlled according to the set
temperature.
NOTE
The following switches cannot be
operated while the rear climate
control system operation screen is
displayed.
Air intake selector switchFront passenger’s side
temperature setting switch
A/C switchIf none of the following switches
are operated, the screen returns
to the front climate control
system operation screen after 10
seconds.
AUTO switchDriver’s side temperature
setting switch
SYNC (synchronized
temperature) switch
Mode selector switchFan control switch
6. To stop the operation, press the climate control system power
switch.

Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-19
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

(Operation from rear seats)
1. Start the hybrid system.
2.
3.
4. Press the temperature setting switchto set the desired temperature.
Each function is automatically
controlled according to the set
temperature.
NOTE
The recommended set
temperature is 22 ℃(72 °F).
If mode selector switch or fan
control switch is operated during
auto operation, the AUTO switch
indicator light turns off.
If the AUTO switch is pressed
while the front A/C switch is off,
the rear air conditioner operates
only to circulate air.
5. To stop the operation, press the climate control system power
switch.
Operating Each Switch
AUTO switch
Automatically controlled according to
the set temperature.
Temperature setting switch
How to increase the set temperature
How to decrease the set temperature
NOTE
The set temperature changes in
increments of 0.5 ℃ within a range
of 15 ℃ (60 °F) and 29 ℃ (84 °F).
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-20
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

The set temperature can be quickly
adjusted by pressing and holding the
temperature setting switch.
When the temperature is set to the
lower or upper limit, “Lo” or “Hi” is
displayed.
Mode selector switch
The desired airflow mode can be
selected.
The mode changes each time the
switch is pressed. The selected mode is
indicated on the display.
Fan control switch
How to increase the airflow amount
How to decrease the airflow amount
The
airflow amount changes each time
the switch is pressed. The airflow
amount is indicated on the display.
The airflow amount can be adjusted to
5 levels.
Climate control system power switch
(system on/off)
Switches the air conditioner on and
off.
The indicator light turns on while the
function is operating.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-21
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

CAUTION
Do not use organic solvents to clean
the seat. It may damage the seat
surface and the heater.
 (second-row)
Before folding a second-row
seatback, make sure that the
second-row seat warmer switch is
off. If a second-row seatback is
folded while the second-row seat
warmer is in operation, it may heat
the seat excessively and damage the
seat surface.
How to Use the Seat
Warmer
1. Start the hybrid system.
2.Front
1. OFF
2. High
3. Mid
4. Low
Second-row seat
*
1. OFF
2. High
3. Mid
4. Low
The indicator light in the seat
warmer switch turns on according
to the set temperature.
The set temperature changes each
time the seat warmer switch is
pressed.
Equipment to Make Cabin More Comfortable
Seat Warmer
*Some models.6-23
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use HeatedSteering Wheel
Using the Heated Steering Wheel
1. Start the hybrid system.
2.
1. Heating area
The indicator light in the heated
steering wheel switch turns on.
NOTE
The heated steering wheel operates for
a certain period of time and then stops
automatically.
Turning Off the Heated Steering
Wheel
Press the heated steering wheel switch.
The heated steering wheel stops and
the indicator light in the switch turns
off.
Convenient Ways to Use
Heated Steering Wheel
The steering warmer can be
automatically (auto mode) turned
on/off depending on the conditions in
the cabin.
The steering warmer can be operated
in conjunction with auto mode for the
climate control system.
1. Turn on the “Occupant Comfort” Refer to Mazda Connect Owner's
Manual or consult an Authorized
Mazda Dealer.
2. Press the AUTO switch for the
climate control system.
NOTE
If the heated steering wheel switch is
pressed during auto mode or the
auto operation of the climate control
system is canceled, the heated
steering wheel switches from auto
mode to manual mode.
To return to auto operation, press
the AUTO switch for the climate
control system.
If the vehicle power is switched OFF
while the heated steering wheel is
operating in auto mode, the heated
steering wheel operates in auto
mode again the next time the vehicle
power is switched ON.
Equipment to Make Cabin More Comfortable
Heated Steering Wheel
6-26
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the SeatVentilation
1. Start the hybrid system.
2.Front
1. OFF
2. High
3. Mid
4. Low
Second-row seat
*
1. OFF
2. High
3. Mid
4. Low
While the seat ventilation is
operating, the indicator light in the
seat ventilation switch turns on
according to the set mode.
NOTE
If the hybrid system is stopped while
the seat ventilation is operating in
manual mode, the seat ventilation
does not turn on automatically the
next time the hybrid system is started.
To turn the seat ventilation on, press
the switch again.
Equipment to Make Cabin More Comfortable
Seat Ventilation
6-28*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Interior Lights......................... 7-41Illuminated Entry System.......7-41
How to Use the Illuminated Entry
System................................ 7-41
How to Use the Overhead
Lights.................................. 7-42
How to Use the Map Lights..........
.......................................... 7-43
How to Use the Door Courtesy
Lights.................................. 7-44
How to Use the Luggage
Compartment Lights............ 7-44
How to Use the Ambient
Lights.................................. 7-45
Accessory Sockets................... 7-46 Accessory Sockets................ 7-46
Warnings and Cautions When
Using the Accessory Socket ..........
.......................................... 7-46
How to Use the Accessory
Socket.................................7-47
AC Power Outlet (120 V/150
W)...................................... 7-47
Warnings and Cautions When
Using the AC Power Outlet (120
V/150 W)........................... 7-48
How to Use the AC Power Outlet
(120 V/150 W)................... 7-49
AC Power Outlet (120 V/1,500
W)...................................... 7-50
Warnings and Cautions When
Using the AC Power Outlet (120
V/1,500 W)........................ 7-50
How to Use the AC Power Outlet
(120 V/1,500 W).................7-51
USB Power Outlet................ 7-52
Warnings and Cautions When
Using the USB Power
Outlet................................. 7-53How to Use the USB Power
Outlet................................. 7-53
Wireless Charger (Qi).............. 7-54 Wireless Charger (Qi)........... 7-54
Warnings and Cautions When
Using the Wireless Charger
(Qi).................................... 7-54
How to Use the Wireless Charger
(Qi).................................... 7-56
Convenient Ways to Use the
Wireless Charger (Qi)........... 7-57
Assist Grip..............................7-58 Warnings and Cautions When
Using the Assist Grips........... 7-58
How to Use the Assist
Grips.................................. 7-58
Towing (U.S.A. and Canada)..... 7-59 Towing................................ 7-59
Warnings and Cautions for Using
the Towing.......................... 7-60
How to Use the Towing........ 7-62
HomeLink Wireless Control
System...................................7-68 HomeLink Wireless Control
System................................ 7-68
Warning and Cautions for Using
the HomeLink Wireless Control
System................................ 7-68
How to Use the HomeLink
Wireless Control System....... 7-69
Accessories............................ 7-73 Warnings and Cautions For Using
the Accessories.................... 7-73
7-2
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04