battery MAZDA CX90 2024 User Guide

e-SKYACTIV PHEV Overview
1. Engine
2. Motor and regenerative braking
3. High voltage battery
4. Charge port
5. AC Power Outlet (120 V/1,500 W)
6. Approaching vehicle audible system
Engine
Depending on the driving condition and driving mode, the engine operates as a
power source or generator for the wheels, and stops when power or power
generation is not required.
Motor
The motor transmits the motor power to the wheels using the electrical power of the
high voltage battery.
Regenerative Braking
Regenerative braking uses the motor to decelerate the vehicle. Power is generated
by the wheels rotating the motor while decelerating and the generated power
charges the high voltage battery.
High Voltage Battery
The high voltage battery is a large-capacity battery and stores the charged power and
the electrical power generated by regenerative braking.
Driving
e-SKYACTIV PHEV
5-17
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Charge port
The charge port connects the charge connector of the charge cable and charges the
high voltage battery with power from an external power supply.
AC Power Outlet (120 V/1,500 W)
The AC power outlet (120 V/1,500 W) provides power for household electrical
appliances while the vehicle power is switched ON (hybrid system off).
Approaching Vehicle Audible System
The approaching vehicle audible system notifies pedestrians of the vehicle
approaching using a warning sound while driving at low speeds.
Driving
e-SKYACTIV PHEV
5-18
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Warning and Cautions for Using the e-SKYACTIV PHEV
The hybrid system has high voltage areas and high temperature areas. Labels
indicating the cautions on use are applied to these areas. Always follow the
instructions on the label and use the vehicle correctly.
WARNING
Be very careful of high voltage areas. In addition, do not disassemble, modify, or
remove any high voltage parts.
The following areas contain high voltage parts and may cause electrical shock if
touched.
1. Motor
2. High voltage battery
3. Onboard charger
4. AC Power Outlet (120 V/1,500 W)
5. Warning label example
6. Service plug
7. High voltage cable
8. Water heater
9. Inverter
10.DC-DC converter
11.Electric compressor
Driving
e-SKYACTIV PHEV
5-19
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Be very careful of high temperature areas.
The hybrid system and the engine become hot when they operate. Follow the
instructions on the label attached to the vehicle and always pay attention to high
voltage areas and high temperature areas.
Do not touch the service plug.
A service plug is installed in the high voltage battery. This service plug is used at an
Authorized Mazda Dealer when repairing vehicles in order to cut off the high voltage
of the high voltage battery. Do not touch the service plug. If you handle the service
plug mistakenly, it could lead to an electrical shock causing serious injury or death.
1. Service plug
Maintenance and Repairs
For vehicle maintenance or repairs, consult an Authorized Mazda Dealer.
Technical knowledge and skill are necessary in handling the high voltage battery.
WARNING
To ensure safe and correct handling of the high voltage battery, always heed the
following precautions.
 Do not remove the high voltage battery.
 Do not resell, transfer, or modify the high voltage battery.
 Do not make secondary use of the high voltage batter.
If the drive battery is not handled properly, the following may occur which could
lead to serious injury or death.
 Touching an unattended high voltage battery may cause an electric shock.
 If the high voltage battery is used on a vehicle other than the one it came
equipped on (including modified vehicles), accidents such as electric shock, heat
generation, smoking, combustion, and explosions, or an electrolyte leakage may
occur.
Heed the following instructions to prevent deterioration of the high voltage battery
or damage to the high voltage battery.
Do not leave the vehicle for a long time under extremely high or low temperature
conditions.
Do not leave the vehicle for 14 days or longer while the high voltage battery power
gauge is at Empty (level 0).
Driving
e-SKYACTIV PHEV
5-20
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

If an Accident Occurs
Heed the following cautions to prevent serious injury such as electric shock, or in the
worst case death.
WARNING
Do not continue to drive the vehicle.
To prevent further accidents, stop the vehicle in a safe place, shift the selector lever
to the P position, and then apply the parking brake to stop the hybrid system.
Never touch electrical wiring that may be protruding into or outside of the cabin.
Otherwise, it could result in electrical shock and serious injury.
Never touch any area where electrolyte is visible or electrolyte is leaking from the
area.
If electrolyte from the high voltage battery gets in the eyes or on the skin, it could
cause loss of vision or skin reactions. If electrolyte comes into contact with the eyes,
do not rub them, and after flushing with water for 15 minutes or longer, seek
medical attention immediately. In addition, if electrolyte comes into contact with
the skin, wash the areas with soap and wate r thoroughly. If you feel any abnormality
in your body, seek medical attention immediately.
Never approach objects that are on fire or extremely hot.
Electrolyte in the high voltage battery may cause a fire. If the vehicle catches fire,
extinguish the fire using a fire extinguisher (type ABC, BC, or C). Only extinguish a
fire with water when a large amount of water is available such as from a fire hydrant.
Using a small amount of water may cause the fire to spread.
Do not tow the vehicle with the front wheels or the rear wheels grounded.
Otherwise, the motor generates electricity which may cause a fire depending on the
condition of the damage. When towing the vehicle, tow it with all 4 wheels off the
ground.
Do not start the hybrid system if there is liquid leaking from the vehicle (other than
air conditioner water).
If liquid leakage (other than air conditioner water) is found on the road surface
under the vehicle, the fuel system may be damaged. Starting the hybrid system in
this condition, may cause a fire. Do not start the hybrid system and contact an
Authorized Mazda Dealer.
Scrapping Your Vehicle and Disposing of High Voltage Battery
The high voltage battery is collected to prevent accidents involving it. When
scrapping your vehicle, replacing the high voltage battery, or disposing of the high
voltage battery, consult an Authorized Mazda Dealer. Please cooperate in ensuring
that the vehicle's high voltage battery is collected.
Driving
e-SKYACTIV PHEV
5-21
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

WARNING
Appropriate disposal of the high voltage battery.
If the high voltage battery is not collected and disposed of appropriately, such as by
leaving it unattended or illegally abando ning it, some other person may touch it
which could cause electrocution leading to serious injury.
Fuel
CAUTION
 The e-SKYACTIV PHEV can be driven on electricity, but depending on the driving
conditions and mode, the vehicle will be driven using the engine and will need to
be refueled. Check the remaining amount of fuel and replenish the fuel if
necessary.
Refer to How to Use the Mazda intelligent Drive Select (Mi-Drive) on page 5-96.
 Depending on the vehicle usage conditions, fuel may remain in the tank for a long
period of time and the quality of the fuel may change. Refuel at least 25 L of fuel
every 12 months (total amount of refueling for 12 months is at least 25 L), as this
may affect parts of the fuel system and the engine.
 If the fuel has not been replenished for a certain period of time and the quality of
the fuel in the fuel tank is expected to change, a message is displayed in the
instrument cluster when the hybrid system is started. When a certain amount of
fuel is consumed, the message displayed in the instrument cluster is no longer
displayed.
Driving
e-SKYACTIV PHEV
5-22
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the
e-SKYACTIV PHEV
Switching the Drive Mode
You can switch the drive mode of the
hybrid system by operating the switch.
TOWING mode/SPORT mode/
NORMAL mode/EV mode/
OFF-ROAD mode
Refer to How to Use the Mazda
intelligent Drive Select (Mi-Drive) on
page 5-96.
CHARGE Mode
The engine is used as a generator, and
the vehicle is driven while charging the
high voltage battery.
1. Start the hybrid system.
2.
When CHARGE mode is activated, the
CHARGE mode indicator light
in
the instrument cluster turns on.
Power is generated to the preset target
charge amount, and when the target
charge amount is reached, power is
generated to maintain it.
NOTE
Switching to CHARGE mode may not
be possible depending on the
conditions of the hybrid system.
When power consumption is high
due to the vehicle driving conditions,
outside air temperature, or when the
air conditioner is used, charging may
take longer than usual or may not
occur.
When the vehicle is driven while in
CHARGE mode, the engine operates
to generate electricity, therefore fuel
consumption may increase
compared to when driving the
vehicle in a mode other than
CHARGE mode.
If the vehicle power is switched OFF
while switching the mode to
CHARGE mode, the CHARGE mode
will be canceled the next time the
vehicle power is switched ON.
When pressing the charge mode
switch while the Mazda intelligent
Drive Select (Mi-Drive) is in EV
mode, the Mi-Drive switches to
NORMAL mode and the vehicle is
driven in CHARGE mode.
The mode may not be able to switch
to CHARGE mode when the fuel is
low.
The target charge amount can be
changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Po we r Me te r
Displays in the instrument cluster while
driving in NORMAL mode or EV mode.
Driving
e-SKYACTIV PHEV
5-23
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

NORMAL mode
1. POWER gauge
2. CHARGE gauge
3. EV drive indicator light
4. Boost indicator light
5. CHARGE mode indicator light
EV mode
1. POWER gauge
2. CHARGE gauge
3. Boost indicator light
POWER gauge
Displays the energy used by the motor
or engine for driving. The higher the
output, the more the power meter
needle moves to the right. The more
the power meter needle moves to the
right, the easier it is to start the engine.
CHARGE gauge
Displays the energy charged in the high
voltage battery by regenerative braking.
The higher the charge, the more the
power meter needle moves
downward.
Boost indicator light
The light turns on when the energy
used for driving is at maximum output.
EV drive indicator light
The light turns on when the vehicle is
being driven using only the motor.
CHARGE mode indicator light
The light turns on when the vehicle is
being driven in CHARGE mode.
Approaching Vehicle Audible System
When the vehicle is driven at low
speeds, a warning sound is
automatically activated to warn that a
vehicle is approaching.
1. Start the hybrid system.
2. Shift the selector lever to a position other than P.
A warning sound is activated and stops
when the vehicle speed reaches 41
km/h (26 mph) or faster.
Driving
e-SKYACTIV PHEV
5-24
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Convenient Ways to Usethe e-SKYACTIV PHEV
Switch to Start in EV Mode
The hybrid system can be changed to
start in EV mode.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Switching the Regenerative Braking
Strength
The regenerative braking strength can
be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
For Eco-Friendly and Economical
Driving
Using the Drive Mode
EV mode is mainly used in urban areas,
while NORMAL mode is used in
suburban areas and on expressways,
which leads to savings in electricity and
fuel consumption.
By actively using regenerative braking
to charge the high voltage battery, it is
possible to increase the EV travel
distance and to reduce fuel
consumption when driving the vehicle
in a mode other than EV mode.
To extend cruising distance
The electrical power consumption
while driving can be reduced and the
cruising distance can be extended by
doing the following operations.
With the charge connector
connected, turn on the climate
control system to provide a
comfortable temperature in the
cabin before driving.
When driving during cold
temperatures, use the seat warmer or
steering warmer instead of the
climate control system.
Adjust the climate control system to
a moderate airflow and temperature
setting.
Refrain from using the defogger
under conditions other than when a
window is fogged or frozen.
By maintaining a sufficient distance
between vehicles and using the
regenerative braking well, more
electrical power can be charged to
the high voltage battery.
To extend the life of the high voltage
battery
The high voltage battery life changes
depending on the vehicle storage
conditions or charging method.
To extend the life of the high voltage
battery, be careful of the following.
(Charging the battery)
Avoid unnecessary, frequent
charging.
Only charge the battery with as much
power as needed, and do not always
fully charge the battery. The
maximum charge limit can be set.
Refer to Convenient Ways to Use of
Charging on page 5-118.
(Parking the vehicle)
Do not park the vehicle in a place
where the ambient temperature is
extremely high or low.
Do not leave the vehicle while the
remaining high voltage battery power
is extremely low.
If the [Battery Cooling] operation notification is displayed on the
center display after driving the
vehicle, select [Activate].
Driving
e-SKYACTIV PHEV
5-25
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Remaining Charge and Temperature
of the High Voltage Battery
If the high voltage battery level is low
or the high voltage battery temperature
is low, the vehicle speed may not
increase even if the accelerator pedal is
depressed because the motor output is
restricted. Check the contents
displayed in the instrument cluster and
the remaining amount of power in the
high voltage battery before driving.
(Battery cooling)
If the high voltage battery temperature
is high after driving the vehicle, it is
possible to cool the high voltage
battery while the vehicle is parked to
extend the life of the high voltage
battery. If the Excessive Battery
Te m p e ra t u r e notification is displayed
on the center display after driving the
vehicle, select Start to start the battery
cooling.
NOTE
Because the electrical power of the
high voltage battery is used by the
battery cooling , we recommend that
the charge connector is connected
while the battery cooling is operating.
Driving
e-SKYACTIV PHEV
5-26
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04