warning MAZDA MODEL 3 HATCHBACK 2016 Quick Guide (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2016, Model line: MODEL 3 HATCHBACK, Model: MAZDA MODEL 3 HATCHBACK 2016Pages: 39, PDF Size: 1.23 MB
Page 26 of 39
When Driving
25For details, refer to Section 4, “i-ACTIVSENSE”.
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS)
If the LDWS OFF indicator light in the instrument
cluster turns off when the ignition is switched ON,
the system goes on standby. System Operation
If the LDWS OFF indicator light in the
instrument cluster turns on when the ignition is
switched ON, press the LDWS OFF switch so
that the system goes on standby.
• The vehicle is driven in the centre of the driving lane with the white
or yello
w lines on the left and right sides, or on either side.
• The vehicle speed is about 70 km/h (44 mph) or faster.
Other conditions are described in the related text.Drive the vehicle in the centre of the vehicle lane while
the system is on standby. The system becomes
operational when all of the following conditions are met.
• The vehicle is driven on a straight road or road with gentle curves.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 27 of 39
26
When Driving
When the Lane-keep Assist System (LAS) & Lane Departure Warning System
(LDWS) goes from stand-by to operational status, the vehicle lane lines are
indicated in the multi-information display or active driving display.
Vehicle lane line display
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS)
For details, refer to Section 4, “i-ACTIVSENSE”.
Indication on display
System condition
Multi-information display Active driving display
Stand-by
Operation status
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 28 of 39
![MAZDA MODEL 3 HATCHBACK 2016 Quick Guide (in English) When Driving
Advanced Smart City Brake Support (Advanced SCBS)/ Smart City Brake
Support [Forward] (SCBS F)/ Smart City Brake Support [Reverse] (SCBS R)
For details, refer to Section 4, “i-ACTIVSEN](/img/28/13412/w960_13412-27.png "MAZDA MODEL 3 HATCHBACK 2016 Quick Guide (in English) When Driving
Advanced Smart City Brake Support (Advanced SCBS)/ Smart City Brake
Support [Forward] (SCBS F)/ Smart City Brake Support [Reverse] (SCBS R)
For details, refer to Section 4, “i-ACTIVSEN")
When Driving
Advanced Smart City Brake Support (Advanced SCBS)/ Smart City Brake
Support [Forward] (SCBS F)/ Smart City Brake Support [Reverse] (SCBS R)
For details, refer to Section 4, “i-ACTIVSENSE”
Advanced Smart City Brake Support (Advanced SCBS) (Except The
Philippines, Taiwan)
The Smart City Brake Support [Reverse] (SCBS R) is a system which is designed to reduce
damage in the event of a collision by operating the brake control (SCBS brake) when the
system’s ultrasonic sensors detect an obstruction at the rear of the vehicle while driving at a
speed of about 2 to 8 km/h (2 to 4 mph) and the system determines that a collision is
unavoidable. In addition, when the driver depresses the brake pedal while the system is in
the operation range at a vehicle speed of about 2 to 8 km/h (2 to 4 mph), the brakes are
applied firmly and quickly to provide assistance. (Brake Assist (SCBS brake assist))
Smart City Brake Support [Reverse] (SCBS R)
The Advanced Smart City Brake Support (Advanced SCBS) alerts the driver of a possible
collision using the display and a warning sound when the Forward Sensing Camera (FSC) detects
a vehicle ahead or pedestrian and determines that a collision with the object is unavoidable while
the vehicle is driven at a vehicle speed of about 4 to 80 km/h (2 to 50 mph) if the object is a
vehicle ahead and about 10 to 80 km/h (6.2 to 50 mph) if the object is a pedestrian.
Smart City Brake Support [Forward] (SCBS F) (The Philippines, Taiwan)
The Smart City Brake Support [Forward] (SCBS F) system alerts the driver of a possible
collision using an indication in the display and a warning sound when the Forward
Sensing Camera (FSC) detects a vehicle ahead and determines that a collision with a
vehicle ahead is unavoidable while the vehicle is being driven at a vehicle speed of about
4 to 80 km/h (2 to 50 mph). In addition, the system reduces damage in the event of a
collision by operating the brake control (SCBS brake) when the system determines that a
collision is unavoidable while the vehicle is being driven at a vehicle speed of about 4 to
30 km/h (2 to 18 mph). It may also be possible to avoid a collision if the relative speed
between your vehicle and the vehicle in front of you is less than about 20 km/h (12 mph).
• The system is only designed to reduce damage in the event of a collision. Over reliance
on the system leading to the accelerator pedal or brake pedal being mistakenly
operated could result in an accident.
• (Advanced Smart City Brake Support (Advanced SCBS)) Do not rely completely on the system:
WARNING
The Advanced Smart City Brake Support (Advanced SCBS) system operates
in response to a vehicle ahead or a pedestrian. The system does not operate
in response to obstructions such as a wall, 2-wheeled vehicles, or animals.
• (Smart City Brake Support [Forward] (SCBS F))
The Advanced Smart City Brake Support (Advanced SCBS) is a system
which operates in response to a vehicle ahead. The system may not be able
to detect or react to 2-wheeled vehicles or pedestrians.
27
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 29 of 39
When Driving
28For details, refer to Section 4, “i-ACTIVSENSE”.
NOTE
Advanced Smart City Brake Support (Advanced SCBS)Advanced Smart City Brake Support (Advanced SCBS)/
Smart City Brake
Support [Forward] (SCBS F)/ Smart City Brake Support [Reverse] (SCBS R)
• The Advanced Smart City Brake Support (Advanced SCBS) system is not
turned off. • The engine is running.
The vehicle speed is between about 4 to 80 km/h (2 to 50 mph).
Smart City Brake Support [Forward] (SCBS F)
The Smart City Brake Support [Forward] (SCBS F) system will operate under
the following conditions.
•
The engine is running.
•The Smart Brake Support/Smart City Brake Support (SBS/SCBS) system
warning light (amber) does not illuminate.
• “SCBS Not Available” is not displayed in the multi-information display. (with
multi-information display)
• (Rear-end collision warning)
Smart City Brake Support [Reverse] (SCBS R)
• The change lever (manual transaxle vehicle) or the selector lever (automatic
transaxle vehicle) is in the R (reverse) position.
•“Reverse Smart City Brake Support Malfunction” is not displayed in the multi-
information display.
•The vehicle speed is between about 2 to 8 km/h (2 to 4 mph).
•The Smart City Brake Support [Reverse] (SCBS R) is not turned off.
• The DSC is not malfunctioning. TheAdvanced Smart City Brake Support (Advanced SCBS) system will
operate under the following conditions.
• The Smart City Brake Support (SCBS) warning light (amber) does not
illuminate.
• (Object is vehicle ahead)
• (Object is a pedestrian)
The vehicle speed is between about 10 to 80 km/h (6.2 to 50 mph).
The vehicle speed is about 4 to 80 km/h (2 to 50 mph).
• (Brake control (SCBS brake))
The vehicle speed is about 4 to 30 km/h (2 to 18 mph).
• The Smart City Brake Support [Forward] (SCBS F) system is not turned off.
The Smart City Brake Support [Reverse] (SCBS R) system will operate under
the following conditions.
• The engine is running.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 30 of 39
When Driving
For details, refer to Section 4, “i-ACTIVSENSE”.
Smart Brake Support (SBS)
The Smart Brake Support (SBS) system alerts the driver of a possible collision
using a display and warning sound if the radar sensor (front) and the Forward
Sensing Camera (FSC) determine that there is the possibility of a collision with a
vehicle ahead while the vehicle is being driven at about 15 km/h or faster (10
mph or faster). Furthermore, if the radar sensor (front) and the Forward Sensing
Camera (FSC) determines that a collision is unavoidable, the automatic brake
control is performed to reduce damage in the event of a collision.
Do not rely completely on the Smart Brake Support (SBS) system and always
drive carefully:
The Smart Brake Support (SBS) is designed to reduce damage in the event of a
collision, not avoid an accident. The ability to detect an obstruction is limited
depending on the obstruction, weather conditions, or traffic conditions. Therefore, if
the accelerator pedal or brake pedal is mistakenly operated it could result in an
accident. Always verify the safety of the surrounding area and depress the brake pedal
or accelerator pedal while keeping a safer distance from vehicles ahead or on-coming
vehicles.
WARNING
In addition, when the driver depresses the brake pedal, the brakes are applied
firmly and quickly to assist. (Brake Assist (SBS brake assist)).
29
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 31 of 39
30
When Driving
For details, refer to Section 4, “i-ACTIVSENSE”.
If there is the possibility of a collision with a
vehicle ahead, the beep sounds continuously and a
warning is indicated in the active driving display.
Collision Warning
The Smart Brake Support (SBS) system may not operate under the following
conditions:
•If the vehicle is accelerated rapidly and it comes close to a vehicle ahead.
Although the objects which activate the system are four-wheeled vehicles, the
radar sensor (front) could detect the following objects, determine them to be an
obstruction, and operate the Smart Brake Support (SBS) system.
•Objects on the road at the entrance to a curve (including guardrails and
snow banks).
•The vehicle is driven at the same speed as the vehicle ahead.
•The accelerator pedal is depressed.
•A vehicle appears in the opposite lane while cornering or rounding a curve.
•When crossing a narrow bridge.
•When entering an underground parking area.
•Metal objects, bumps, or protruding objects on the road. NOTE
Smart Brake Support (SBS)
•The brake pedal is depressed.
•The steering wheel is being operated.
•The selector lever is being operated.
• The direction indicator is being used.
• When the vehicle ahead is not equipped with tail lights or the tail lights are
turned off.
• When warnings and messages, such as a dirty windscreen, related to the
Forward Sensing Camera (FSC) are being displayed in the multi-
information display.
•
When passing under a low gate or through a tunnel or narrow gate.
•If you suddenly come close to a vehicle ahead.
•When driving in areas where there is high grass or forage.
•Two-wheeled vehicles such as motorbikes or bicycles.
•Pedestrians or non-metallic objects such as standing trees.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 33 of 39
32
When Driving
For details, refer to Section 4, “i-ELOOP” or Section 7,
“Warning/Indicator Lights and Warning Sounds”.
The i-ELOOP power generating status is displayed in the audio display.
Indication on display
Control Status Display
Control status
Displays the level of electricity generated by
regenerative braking.
Displays the amount of the electricity stored
in the rechargeable battery.
Displays the status of the electricity stored
in the rechargeable battery and being
supplied to the electrical devices (whole
vehicle in display is illuminated
simultaneously).
i-ELOOP Warning Beep
The beep will activate if you attempt to drive the
vehicle under the following conditions.
• The i-ELOOP indicator light is flashing green.
• “i-ELOOP Charging” is indicated in the centre display (Type C/Type D audio).
The beep will stop when the vehicle is stopped. Make sure the indicator light is no
longer illuminated and the message is no longer displayed before driving the vehicle.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 34 of 39
33
When Driving
Diesel Particulate Filter
The diesel particulate filter collects and removes most of the particulate matter
(PM) in the exhaust gas of a diesel engine.
• If the vehicle is driven at 15 km/h (9 mph) or less continuously.
For details, refer to Section 4, “Tyre Pressure Monitoring System” or
“Diesel Particulate Filter”.
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four tyres. If the air pressure of one or more tyres is too low, the system warns the
driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
•
Tyre rotation is performed.
• A tyre or wheel is replaced.
• The battery is replaced or completely drained.
• The tyre pressure monitoring system warning
light is illuminated.
Tyre Pressure Monitoring System
PM collected by the diesel particulate filter is cleared during normal driving,
however, PM may not be removed and the diesel particulate filter indicator light
may illuminate under the following conditions:
• If the vehicle is repeatedly driven for a short period of time (10 minute or less)
or driven while the engine is cold.
• If the vehicle is idled for a long time.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 36 of 39
35
Maintenance and Care
Selector
X Mark MAX MIN
Owner Maintenance Precautions
Routine Service
We highly recommend that these items be inspected daily, or at least every week.
• Engine Oil Level
• Engine Coolant Level
• Brake and Clutch Fluid Level
• Washer Fluid Level
• Battery Maintenance
• Tyre Inflation Pressure
For details, refer to Section 6, “Owner Maintenance”.
Inspecting Engine Oil Level
If the engine oil level exceeds the “X” mark on the dipstick, replace the engine oil.
When inspecting the engine oil level, pull out the dipstick straight without twisting.
In addition, when inserting the dipstick, always insert it without twisting so that
the “X” mark faces the front of the vehicle.
Whenever the engine oil is replaced, the vehicles engine control unit needs to be reset as
soon as possible. Otherwise the wrench indicator light or engine oil warning light may
turn on. To reset the engine control unit, consult an expert repairer, we recommend an
Authorised Mazda Repairer or refer to the vehicle engine control unit reset procedure.
NOTE
The initialization (engine oil data resetting) of the recorded value can be
performed using the following procedure:
1. Switch the ignition OFF.
2. Switch the ignition ON with the selector pressed, and press and hold the
selector for about 5 seconds until the master w
arning light flashes.
3. After the master warning light flashes for several seconds, the
initialization is completed.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 37 of 39
36
If Trouble Arises
If Trouble Arises
• Flat Tyre
If you have a flat tyre, drive slowly to a level spot that is well off the road and
out of the way of traffic to change the tyre.
In the event of a flat tyre, use the emergency flat tyre repair kit to repair the tyre
temporarily or use the temporary spare tyre.
• Overheating
1. Drive safely to the side of the road and park off the right-of-way.
2. Check whether coolant or steam is escaping from the engine compartment.
If steam is coming from the engine compartment:
Do not go near the front of the vehicle. Stop the engine.
Wait until the steam dissipates, then open the bonnet and start the engine.
If neither coolant nor steam is escaping:
Open the bonnet and idle the engine until it cools.
• Towing Description
We recommend that towing be done only by an expert repairer, we recommend
an
Authorised Mazda Repairer or a commercial tow-truck service.
• Warning Lights and Warning Sounds
If a warning light illuminates or flashes or a warning sound is heard, check for
details concerning the warning light or sound in this guide. If the problem
cannot be resolved, contact an Authorised Mazda Repairer.
For details, refer to Section 7, “Flat Tyre”, “Overheating”, “Emergency Towing” or
“Warning/Indicator Lights and Warning Sounds”.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D