MAZDA MODEL CX-5 2015 Quick Guide (in English)

20
When Driving
For details, refer to Section 4, “Smart City Brake Support [Forward] (SCBS
F)”, “Smart City Brake Support [Reverse] (SCBS R)”.
Smart City Brake Support [Forward] (SCBS F)/Smart City Brake Support [Reverse] (SCBS R)
The Smart City Brake Support [Forward] (SCBS F) is a system designed to reduce
damage in the event of a collision by operating the brake control when the system’s
laser sensor (front) detects a vehicle ahead and the system determines that a
collision is unavoidable. The system operates while the vehicle is moving in the
forward direction in the speed range of 4 to 30 km/h (3 to 18 mph), reducing
damage in the event of a collision.
It may also be possible to avoid a collision if the relative speed between your
vehicle and the vehicle in front of you is less than about 20 km/h (12 mph).
Smart City Brake Support [Forward] (SCBS F)
The Smart City Brake Support [Reverse] (SCBS R) is a system designed to reduce
damage in the event of a collision by operating the brake control when the system’s
ultrasonic sensors detect a vehicle or a wall at the rear of the vehicle and the system
determines that a collision is unavoidable.
The system operates while the vehicle is reversing in the speed range of 2 to 8 km/h
(2 to 4 mph), reducing damage in the event of a collision.
Smart City Brake Support [Reverse] (SCBS R)
Do not rely completely on the system:
• (Smart City Brake Support [Forward] (SCBS F))
If the vehicle height or inclination is changed, the system will not be able to
correctly detect vehicles ahead. This will result in the Smart City Brake
Support (SCBS) system not operating normally or mistakenly operating,
which could cause a serious accident.
WARNING
Do not modify the suspension: • (Smart City Brake Support [Reverse] (SCBS R))The Smart City Brake Support [Forward] (SCBS F) operates in response to
a vehicle (4-wheeled vehicle) in front of your vehicle. Operation in
response to 2-wheeled vehicles or pedestrians is not guaranteed.
The Smart City Brake Support [Reverse] (SCBS R) operates in response to
a vehicle (4-wheeled vehicle) behind of your vehicle or a wall. Operation in
response to 2-wheeled vehicles or pedestrians is not guaranteed.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
1219
NOTE
• (Smart City Brake Support [Forward] (SCBS F))
• Trucks with low loading platforms and vehicles with an extremely low or
high profile.
Smart City Brake Support [Forward] (SCBS F)/Smart City Brake Support [Reverse] (SCBS R)
The Smart City Brake Support [Forward] (SCBS F) detects a vehicle ahead
by emitting a near-infrared laser beam and receiving the beam reflected off
the reflector of the vehicle ahead, and then using it for the measurement.
Consequently, the Smart City Brake Support [Forward] (SCBS F) may not
operate under the following conditions:
•
Under bad weather condition, such as rain, fog and snow.
• The window washer is being used or the windscreen wipers are not used
when it's raining.
• The windscreen is dirty.
• The steering wheel is turned completely left or right, or the vehicle is
accelerated rapidly and comes close to the vehicle ahead.
• (Smart City Brake Support [Reverse] (SCBS R))
• The obstruction is small.
The Smart City Brake Support [Reverse] (SCBS R) operates using ultrasonic
sensors (rear) which detect obstructions at the rear by emitting ultrasonic
waves and then receiving the returning waves reflected off the obstructions.
•
The obstruction is thin such as a signpost.
• The obstruction is soft such as a hanging curtain or snow stuck to a vehicle.
• The obstruction is shaped irregularly.
• The surface of the obstruction is not pointed vertically relative to the vehicle.
In the following cases, the ultrasonic sensors (rear) cannot detect obstructions
and the Smart City Brake Support [Reverse] (SCBS R) may not operate.
•
The obstruction is positioned away from the centre of the vehicle.
• Something is stuck on the bumper near an ultrasonic sensor (rear).
• When travelling near objects such as foliage, barriers, vehicles, walls, and
fences along a road.
• When driving off-road in areas where there is grass and forage.
Other details are described in the related text.
For details, refer to Section 4, “Smart City Brake Support [Forward] (SCBS
F)”, “Smart City Brake Support [Reverse] (SCBS R)”.
Other details are described in the related text.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

22
When Driving
Smart Brake Support (SBS)
Smart Brake Support (SBS) is a system which alerts the driver of a possible
collision using an indicator and warning sound in the instrument cluster while the
vehicle is being driven at about 15 km/h or faster (10 mph or faster) and the
system's radar sensor determines that your vehicle may hit a vehicle ahead.
Furthermore, if the radar sensor determines that a collision is unavoidable, the
automatic brake control is performed to reduce damage in the event of a collision.
For details, refer to Section 4, “Smart Brake Support (SBS)”.
Do not rely completely on the Smart Brake Support (SBS) system and always
drive carefully:
The Smart Brake Support (SBS) system is only designed to reduce damage in the
event of a collision. The ability to detect obstructions is limited depending on the
obstruction, weather conditions, or traffic conditions.
Check the safety of the surroundings and pay sufficient attention to the
distance between your vehicle and the vehicles travelling in front and behind.
WARNING
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
23For details, refer to Section 4, “Smart Brake Support (SBS)”.
Smart Brake Support (SBS)
NOTE
The Smart Brake Support (SBS) system may not operate under the followingy
conditions:
• If there is the possibility of hitting only a part of a vehicle ahead.
Although the objects which activate the system are 4-wheeled vehicles, the radar
sensor could detect the following objects, determine them to be an obstruction,
and operate the Smart Brake Support (SBS) system.
• Objects on the road at the entrance to a curve (including guardrails and
snow banks).
If there is the possibility of a collision with a vehicle or
obstruction ahead, the beep sounds continuously and a
warning is indicated in the display.
Collision Warning
Other details are described in the related text.
Other details are described in the related text.
• The vehicle is driven at the same speed as the vehicle ahead.
• The brake pedal, steering wheel, selector lever, or a direction indicator is
operated.
• A vehicle appears in the opposite lane while cornering or rounding a curve.
• When crossing a narrow bridge, passing through a low gate or tunnel, a
narrow gate, or entering an underground parking area.
• Metal objects, bumps, or protruding objects on the road.
• Two-wheeled vehicles such as motorcycles and bicycles, pedestrians, trees.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

24
When Driving
i-ELOOP System
On conventional vehicles, the kinetic energy that is generated when the vehicle is
decelerated by applying the brakes or during engine braking ends up being discarded
as heat. By utilizing this discarded kinetic energy to generate electricity and use it to
power the vehicle's electrical devices and accessories such as the A/C and audio, fuel
consumption can be reduced. Mazda's system for generating electricity from this
kinetic energy is called the Deceleration Energy Generation System (i-ELOOP).
For details, refer to Section 4, “i-ELOOP”.
Electric components Engine Components Vehicle Systems: Air-conditioning Audio Head-lights, etc
Accelerator OFF
Accelerator ON
Energy
regeneration Charge Battery
Battery Power
Power Electric components
Engine Components
Vehicle Systems:
Air-conditioning
Audio
Head-lights, etc
Engine
Variable
Voltage
alternator
Variable
Voltage
alternator Engine
Tyre TyreCapacitor
Capacitor DC-DC
converter
DC-DC
converter
Kinetic energy
Electrical power
The i-ELOOP power generating status is displayed in the audio display.
Indication on display
Control Status Display
Control status
Displays the level of electricity generated by
regenerative braking.
Displays the amount of the electricity stored
in the capacitor.
Displays the status of the electricity stored
in the capacitor and being supplied to the
electrical devices (whole vehicle in display
is illuminated simultaneously).
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

25
When Driving
X Mark Full Low
Diesel Particulate Filter
The diesel particulate filter collects and removes most of the particulate matter
(PM) in the exhaust gas of a diesel engine.
Inspect the engine oil level periodically (before getting in the vehicle). When
inspecting the engine oil, if the engine oil level is close to or exceeds the “X” mark
on the dipstick, replace the engine oil.
Whenever the engine oil is replaced, the vehicles engine control unit needs to be
reset as soon as possible. Otherwise the wrench indicator light or engine oil
warning light may turn on.
For details, refer to Section 4, “i-ELOOP”, “Tyre Pressure Monitoring System”,
“Diesel Particulate Filter” or Section 6, “Owner Maintenance”.
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four wheels. If the air pressure of one or more tyres is too low, the system warns
the driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
• Tyre rotation is performed.
• A tyre or wheel is replaced.
• The battery is replaced or completely drained.
• The tyre pressure monitoring system warning
light is illuminated.
Tyre Pressure Monitoring System
To reset the engine control unit, refer to the vehicle engine control unit reset
procedure or consult an expert repairer, we recommend an Authorised Mazda
Repairer.
i-ELOOP Charging Display
If the vehicle is driven while “i-ELOOP charging”
is displayed, a beep sound is heard. Make sure the
message is no longer displayed before driving.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

Interior Features
26
Airflow display Temperature setting display (driver)
Mode selector
display A/C mode display
Temperature setting display (passenger)
Air intake selector
(recirculated air
position)
Air intake selector
(outside air position) Driver temperature control dial
AUTO switch
Mode selector switch Fan control switchOFF
switchWindscreen defroster switch
Rear window defogger switch
Passenger temperature
control dial
DUAL switch A/C switch
Air-Conditioning System (Fully Automatic Type)
Operation of Automatic Air Conditioning
1. Press the AUTO switch. Selection of the airflow mode, air intake selector and
amount of airflow will be automatically controlled.
2. Use the temperature control dial to select a desired temperature.
3. To turn off the system, press the OFF switch.
Press the DUAL switch or turn the front passenger temperature control dial to
control the set temperature individually for the driver and front passenger.
For details, refer to Section 5, “Air-Conditioning System”.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

27
Maintenance and Care
Windscreen washer fluid reservoir
Engine oil-filler capBrake/Clutch fluid reservoir
Engine oil dipstickBatteryFuse block
Cooling system cap
Engine coolant reservoir
SKYACTIV-G 2.0 and SKYACTIV-G 2.5
SKYACTIV-D 2.2
Windscreen washer fluid reservoir
Engine oil-filler capBrake/Clutch fluid reservoir
Engine oil dipstickBattery
Engine coolant reservoirFuse block
Cooling system cap
Owner Maintenance Precautions
Routine Service
We highly recommend that these items be inspected daily, or at least every week.
• Engine Oil Level
• Engine Coolant Level
• Brake and Clutch Fluid Level
• Washer Fluid Level
• Battery Maintenance
• Tyre Inflation Pressure
For details, refer to Section 6, “Owner Maintenance”.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

If Trouble Arises
28
If Trouble Arises
• Flat Tyre
If you have a flat tyre, drive slowly to a level spot that is well off the road and
out of the way of traffic to change the tyre.
In the event of a flat tyre, use the temporary spare tyre.
• Overheating
1. Drive safely to the side of the road and park off the right-of-way.
2. Check whether coolant or steam is escaping from the engine compartment.
If steam is coming from the engine compartment:
Do not go near the front of the vehicle. Stop the engine.
Wait until the steam dissipates, then open the bonnet and start the engine.
If neither coolant nor steam is escaping:
Open the bonnet and idle the engine until it cools.
• Towing Description
We recommend that towing be done only by an expert repairer, we recommend
an Authorised Mazda Repairer or a commercial tow-truck service.
• Warning Lights and Warning Sounds
If a warning light illuminates or flashes or a warning sound is heard, check for
details concerning the warning light or sound in this guide. If the problem
cannot be resolved, contact an Authorised Mazda Repairer.
For details, refer to Section 7, “Flat Tyre”, “Overheating”, “Emergency Towing” or
“Warning/Indicator Lights and Warning Sounds”.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD