auxiliary battery MAZDA MODEL CX-5 2017 Owners Manual (in English)

3–47
Before Driving
Security System
*Some models.
Theft-Deterrent System *
If the theft-deterrent system detects an
inappropriate entry into the vehicle,
which could result in the vehicle or its
contents being stolen, the alarm alerts the
surrounding area of an abnormality by
sounding the horn and fl ashing the hazard
warning lights.

The system will not function unless it's
properly armed. So when you leave the
vehicle, follow the arming procedure
correctly.
Operation
System triggering conditions
The horn sounds intermittently and the
hazard warning lights fl ash for about
30 seconds when the system is triggered
by any one of the following:
   Unlocking a door with the key, door
lock switch, or an inside door-lock knob.
   Forcing open a door, the hood or the
liftgate.
   Opening the hood by operating the hood
release handle.
   Switching the ignition ON without using
the push button start.

If the system is triggered again, the lights
and horn will activate until the driver's
door or the liftgate is unlocked with the
transmitter.
(With the advanced keyless function)
The lights and horn can also be
deactivated by pressing the request switch
on a door.
NOTE
   The liftgate does not open while the
theft-deterrent system is operating.
  For vehicles equipped with the power
liftgate, the liftgate can be opened
even while the theft-deterrent system is
operating by pressing the power liftgate
button on the transmitter or the electric
liftgate opener switch while carrying
the key.
  If the battery goes dead while the theft-
deterrent system is armed, the horn will
activate and the hazard warning lights
will fl ash when the battery is charged or
replaced.

How to Arm the System
1. Close the windows and the moonroof *
securely.
2. Switch the ignition OFF.
3. Make sure the hood, the doors, and the liftgate are closed.
4. Press the lock button on the transmitter or lock the driver's door from the
outside with the auxiliary key.
The hazard warning lights will fl ash
once.
The following method will also arm the theft-deterrent system:
Press the door-lock switch “
” while
any door is open and then close all of
the doors.
(With the advanced keyless function)
Press a request switch.

The security indicator light in the instrument cluster fl ashes twice per
second for 20 seconds.


5. After 20 seconds, the system is fully armed.

CX-5_8FN1-EA-16L_Edition1.indb 472016/12/12 10:05:37

5–17
Interior Features
Before Using the Audio System
NOTE
  This mode may not be usable depending
on the portable audio device to be
connected.
  Before using the auxiliary jack/USB
port, refer to the instruction manual for
the portable audio device.
  Use a commercially-available, non-
impedance (3.5
) stereo mini plug for
connecting the portable audio unit to
the auxiliary jack. Before using the
auxiliary jack, read the manufacturer's
instructions for connecting a portable
audio unit to the auxiliary jack.
   To prevent discharging of the battery,
do not use the auxiliary input for long
periods with the engine off or idling.
  When connecting a device to the
auxiliary jack or USB port, noise may
occur depending on the connected
device. If the device is connected to the
vehicle's accessory socket, the noise can
be reduced by unplugging it from the
accessory socket.

How to connect USB port/Auxiliary jack
Type A


USB port Auxiliary jack

Type B


USB port Auxiliary jack

Connecting a device
1. Open the console lid.
2. If there is a cover on the auxiliary jack or USB port, remove the cover. (Type
A)
3. Connect the connector on the device to the USB port.

CX-5_8FN1-EA-16L_Edition1.indb 172016/12/12 10:06:27

6–37
Maintenance and Care
Owner Maintenance
The following conditions indicate that the
battery power is low:
  The KEY indicator light (green) fl ashes
in the instrument cluster for about
30 seconds after the engine is turned off
(for vehicles with a type A instrument
cluster (page 4-32 ), messages are
displayed in the instrument cluster).
   The system does not operate and
the operation indicator light on the
transmitter does not fl ash when the
buttons are pressed.
   The system's operational range is
reduced.

Replacing the battery at an Authorized
Mazda Dealer is recommended to prevent
damage to the key. If replacing the battery
by yourself, follow the instruction.
Replacing the key battery
1. Press the knob and pull out the auxiliary key.

Knob
2. Twist a tape-wrapped
fl athead
screwdriver in the direction of the
arrow and open the cover slightly.

Cover

3. Insert the tape-wrapped fl athead
screwdriver into the gap and slide it in
the direction of the arrow.

Cover
Gap

4. Twist the fl athead screwdriver in the
direction of the arrow and remove the
cover.

Cover

CX-5_8FN1-EA-16L_Edition1.indb 372016/12/12 10:07:12

6–38
Maintenance and Care
Owner Maintenance
5. Remove the battery cap, then remove the battery.


CAUTION
 Be careful not to allow the rubber ring shown in the fi gure to be scratched or
damaged.
 If the rubber ring detaches, reattach it before inserting a new battery.


Rubber ring

6. Insert a new battery with the positive pole facing up, and then cover the
battery with the battery cap.


7. Close the cover.


8. Reinsert the auxiliary key.

CX-5_8FN1-EA-16L_Edition1.indb 382016/12/12 10:07:12