MAZDA MODEL MX-5 2016 Navigation Manual (in English)

21
1
2
3
4
5
6
Action Button(s)Description
Tilting up and
down
, Changes the vertical view angle of the map in
3D mode.
Select the button once to modify the view in
large steps, or select and hold the button to
modify it continuously and smoothly.
Rotating left
and right
, Changes the horizontal view angle of the map.
Select the button once to modify the view in
large steps, or select and hold the button to
modify it continuously and smoothly.
Compass
The direction of the compass shows North.
Select the button to switch to North-up view,
and then select again to rotate the map in the
previous direction.
Open/close
, The UMP (menu bar) is displayed on the
lower part of the screen.
Hides the displayed UMP if the UMP has been
displayed.
Select
destination
Select this button to select the Cursor as a
new destination. The route is automatically
calculated.
Return to
normal
navigation
Select this button to move the map back to
follow the current GPS position. Automatic
map rotation is also re-enabled.
The map manipulation buttons disappear and
navigation continues.
/"7$76&&JOEC


 /"7$76&&JOEC












22
Action Button(s)Description
2D or 3D view
, ,
When this button is selected, the map view
mode can be changed.
•
: The map is displayed so that north is up
regardless of the direction of travel.
•
: The map is rotated so that the direction
of travel is displayed in the upward
direction.
•
: Displays things such as actual
construction sites three dimensionally on the
map.
Zoom-in/zoom-
out mode
You can zoom-in/zoom-out of maps.
Rotate mode
Rotates maps.
Perspective
angle mode
You can change the angle of perspective on a
map.
/"7$76&&JOEC


 /"7$76&&JOEC












23
1
2
3
4
5
6
2.4.5 Checking the details of the current position (Where Am I?)
This screen contains information about the current position (or about t\
he last known
position if GPS reception is not available).
You can access this screen from the map in one of the following ways: 1. Select
after selecting on the MAP screen.
2. Select the Where Am I? screen.
/"7$76&&JOEC


 /"7$76&&JOEC


 








24
3 On-road navigation
You can set up your route in different ways:
If you need a route for immediate navigation, you can select the destina\
tion and start
navigating to it right away (normal navigation).
You can plan routes with multiple destinations. Select the fi rst destination. Then
select a second destination and add it to your route to create a multi-p\
oint route. You
can add as many destinations to your route as you like.
3.1 Selecting the destination of a route
The navigation system offers you several ways of choosing your destination:
• Enter a full address or a part of an address (page 25).
• Select a POI (point of interest) from a database as your destination (\
page 39).
• Searches the destination from the map (page 55).
• Use a previously saved Favorite destination (page 57).
• Select a location from the History of previously used destinations (pag\
e 59).
• Enter the coordinate of the destination (page 61).
There are other convenient functions.
/"7$76&&JOEC


 /"7$76&&JOEC


 








25
1
2
3
4
5
6
3.1.1 Entering an address or a part of the address
If you know at least a part of the address, it is the quickest way to se\
lect the
destination of the route.
Using the same screen, you can fi nd an address by entering:
• Destination address
• The center of a city
• An intersection
• The midpoint of a street
If an address or part of a facility name is input, a search candidate li\
st including
the input characters is displayed. The greater the number of characters input the
more the list is re fi ned.
3.1.1.1 Entering an address
To enter an address as the destination, do as follows: 1. Select
after selecting on the MAP screen.
2. Select
.
3. By default, the navigation system proposes the country and city where yo\
u are. If needed, select
, enter the fi rst few letters of the country name
on the keyboard, and select one country from the list of results.
/"7$76&&JOEC


 /"7$76&&JOEC


 








26
4. If needed, select a new city:
a. Select
.
b. Start entering the name of the city on the keyboard.
c. Find the city you need:
• The most likely city name is always shown in the input fi eld. To accept
it, select
.
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the lis\
t of
results before it appears automatically, select
). Select the city from
the list.
/"7$76&&JOEC


 /"7$76&&JOEC


 








27
1
2
3
4
5
6
5. Enter the street name: a. Select
.
b. Start entering the street name on the keyboard.
c. Find the street you need: • The most likely street name is always shown in the input fi eld. To accept
it, select
.
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the lis\
t
of results before it appears automatically, select
). Select the street
from the list.
/"7$76&&JOEC


 /"7$76&&JOEC


 








28
6. Enter the house number:
a. Select
.
b. Enter the house number on the keyboard. (To enter letters, select
.)
c. Select
to fi nish entering the address. (If the entered house number
cannot be found, the midpoint of the street is selected as the destinati\
on.)
7. The selected location is shown on the map. The system transitions to the next screen by selecting
, or it
returns to the previous screen by selecting the
button. By touching the
location displayed on the screen, you can change the destination to anyw\
here
on the map.
• : You can search for POI (point of interest) around
the selected location.
•
: The selected location can be registered to Favorites.
/"7$76&&JOEC


 /"7$76&&JOEC


 








29
1
2
3
4
5
6
8. Navigation starts if is selected, or after 10 seconds of no user
interaction.
By touching the location displayed on the screen, you can verify the rou\
te.
Additionally, the route can be revised by selecting other options.
/"7$76&&JOEC


 /"7$76&&JOEC


 








30
3.1.1.2 Entering the midpoint of a street as the destination
You can navigate to the midpoint of a street if the house number is not a\
vailable:
1. Select
after selecting on the MAP screen.
2. Select
.
3. If necessary, modify the country and city as described earlier (page 25).
4. Enter the street name: a. Select
.
b. Start entering the street name on the keyboard.
c. Find the street you need: • The most likely street name is always shown in the input fi eld. To accept
it, select
.
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the lis\
t
of results before it appears automatically, select
). Select the street
from the list.
/"7$76&&JOEC


 /"7$76&&JOEC