navigation MERCEDES-BENZ C-CLASS COUPE 2015 User Guide

X
Confir mbyp ressing aon thesteering
wheel.
X Press :or9 to select th edigital
speedometer.
Resetting values X
Press òon thesteering wheel to open the
men ulist.
X Press :or9 on thesteering wheel to
select the Trip
Tripmenu.
X Confir mbyp ressing aon thesteering
wheel.
X Press :or9 to select th efunction that
you wish to reset.
X Press a.
X Press :to select Yes Yesand press ato
confirm.
You can reset th evalues of th efollowin gfunc-
tions:
R Trip meter
R "From start "tripc om puter
R "From reset "tripc om puter
R ECO display
If you reset th evalues in th e"ECO display", the
values in th e"From start "tripc om puter are also
reset .Ifyou reset th evalues in th e"From start"
trip computer, th evalues in th e"ECO display"
are also reset. Navigation menu
Displaying navigation instructions In the
Navi Navimenu, th emultifunction display
shows navigation instructions. You can fin dfur-
ther informatio nonnavigation instruction sin
th es eparate operatin ginstructions.
X Switch on th emultimedia system (see sepa-
rat eo peratin ginstructions).
X Press òon thesteering wheel to open the
men ulist.
X Press :or9 on thesteering wheel to
select the Navi
Navimenu.
X Confir mbyp ressing aon thesteering
wheel. Route guidance not active
:
Direction of travel
; Curren troad
Route guidance active No change of direction announced
:
Distance to th enextd estination
; Estimate darrival time
= Distance to th enextc hang eofd irection
? Curren troad 238
Menu
sand submenusOn-boar dcomputer and displays

X
Press ato confirm.
The curren tselection appears.
X To activate/deactivate: press theabut-
ton again.
Further information about Blind Spot Assist
(Y page 218).
For further information about Active Blind Spot
Assist ,see (Y page 221).
Setting ATTENTION ASSIST X Press òon the steerin gwheel to open the
menu list.
X Press :or9 on the steerin gwheel to
select the Settings Settings menu.
X Confirm by pressing aon the steering
wheel.
X Press :or9 to select the Assistance
Assistance
submenu.
X Press ato confirm.
X Select ATTENTION ASSIST
ATTENTION ASSIST with: or
9.
X Press ato confirm.
X Press :or9 to select Deactivated
Deactivated,
Standard
Standard orSensitive
Sensitive.
X Press the abutton to confirm the selec-
tion.
When ATTENTION ASSIST is deactivated, the
é symbol appears in the Assistance
Assistance
graphic graphic menu in the multifunction display.
For further information about ATTENTION
ASSIST, see (Y page 215).
Setting Lane Keeping Assist X Press òon the steerin gwheel to open the
menu list.
X Press :or9 on the steerin gwheel to
select the Settings
Settings menu.
X Confirm by pressing aon the steering
wheel.
X Press :or9 to select the Assistance
Assistance
submenu.
X Press ato confirm.
X Select Lane Keeping Assist
Lane Keeping Assist with: or
9.
X Press ato confirm.
The curren tselection, Standard
Standard orAdap‐
Adap‐
tive
tive,a ppears.
X To change the setting: pressaagain.
For further information about Lane Keeping
Assist ;see (Y page 219). Further information about Active Lane Keeping
Assist (Y page 223).
Head-up display submenu Selecting other displays
:
Vehicle speed display
; Vehicle speed and navigation instruction
display
= Vehicle speed display and Traffic Sign Assist
You have up to four different display options
with the Display Display content
contentfunction, depending
on the vehicle's equipment. The selected con-
tentsa ppear in the head-up display.
In Mercedes-AMG vehicles, you can also choose
between two AMG displays. If you select an
AMG display, the head-up display shows AMG-
specific contents.
X Press òon the steerin gwheel to open the
menu list.
X Press :or9 on the steerin gwheel to
select the Settings
Settings menu.
X Confirm by pressing aon the steering
wheel.
X Press :or9 to select the Head-up Head-up
display display submenu.
X Press ato confirm.
X Select Display
Display content
contentwith: or9.
X Press ato confirm.
Ag raphic selection list appears.
X Press :or9 to select the desired dis-
play.
X Press the abutton to confirm the selec-
tion.
You can find more information on the navigation displays in the multimedia system (see separate
operating instructions).
Information on Traffic Sign Assist (Y page 216).246
Menus and submenusOn-board computer and displays

X
Confir mbyp ressing aon thesteering
wheel.
X Press :or9 to select the Lights
Lights
submenu.
X Press ato confirm.
X Press :or9 to select the Dipped
Dipped
beams Settin gfor
beams Settin gforfunction.
You will see th eselected setting, right-
right-
sid et raffic
sid et raffic orleft-side traffic
left-side traffic.
X Press the abuttontos ave th esetting.
If you chang ethe setting, conversion does not
tak eplaceu ntil th enexttim et he vehicle is
stationary.
If you set th edipped-beam headlamps for driv-
ing on th eright/left ,the nm otorway mod eand
th ee xtended range foglamps are unavailable.
Thes eare only deactivate difthesettin gfor driv-
ing on th eleft/right is set opposit etoyour vehi-
cle's country version.
Aq ualified specialist worksho pcan set the
dipped-beam headlamps for driving on th eleft/
right.
Instrumen tcluster submenu Selecting th
edistance unit
The Display Display unit unitSpeed-/odometer
Speed-/odometer function
allows you to choos ewhether certain displays
appear in kilometres or mile sinthemultifunc-
tio nd isplay.
X Press òon thesteering wheel to open the
men ulist.
X Press the :or9 buttononthesteering
wheel to select the Settings
Settings menu.
X Confir mbyp ressing aon thesteering
wheel.
X Use : or9 to select the Instrument
Instrument
cluster
cluster submenu.
X Press ato confirm.
X Press :or9 to select the Display
Display
uni tS peed-/odometer
uni tS peed-/odometer function.
The curren tsetting km
kmorMiles
Miles appears.
X Press the abuttontos ave th esetting.
The selected unit of measuremen tfor distance
applies to the:
R digital speedometer in the Trip
Tripmenu
R total distanc erecorder and th etripm eter
R trip computer
R curren tconsum ption and th erange
R range R
navigation instruction sintheNavi
Navi menu
R Cruis econtrol
R SPEEDTRONIC
R DISTRONI CPLUSw ithS teering Assist and
Stop&Go Pilot
R ASSYS TPLUSs ervic einterval display
Switching th eadditiona lspeedometer
on/off
Unite dKingdom :thisf unction is unavailable.
The additional speedometer is always switched
on.
If th eadditional speedometer is switched on,
th es pee diss hown in th estatus bar of th emul-
tifunctio ndisplay instead of th eoutside tem-
perature.
The spee ddisplay is invers etoyour speedome-
ter.
X Press òon thesteering wheel to open the
men ulist.
X Press :or9 on thesteering wheel to
select the Settings Settings menu.
X Confir mbyp ressing aon thesteering
wheel.
X Press :or9 to select the Instru‐
Instru‐
men tc luster
men tc luster submenu.
X Press ato confirm.
X Press :or9 to select the Digital
Digital
speedo [km/h]
speedo [km/h] function.
The curren tselection appears.
X To activate/deactivate: press theabut-
to na gain.
Vehicle submenu Settin
gpermanent SPEEDTRONIC
X Press òon thesteering wheel to open the
men ulist.
X Press :or9 on thesteering wheel to
select the Settings Settings menu.
X Confir mbyp ressing aon thesteering
wheel.
X Press :or9 to select the Vehicle Vehicle
submenu.
X Press ato confirm.
X Press :or9 to select the Limit
Limit
speed (winte rtyres)
speed (winte rtyres) function.
The curren tsettin gappears.
X Press ato confirm. 248
Menu
sand submenusOn-boar dcomputer and displays

Warning/
indicator
lamp
N N
Signal type
Possiblec auses/consequences and M
MSolutions !
N
The yellow ABS warning lamp is lit while the engine is running.
ABS (Anti-lock Braking System) is faulty.
An additiona lwarning tone indicates that EBD (electronic brake force distribution)
is faulty.
Other driving and driving safety systems may alsobef aulty.
G WARNING
The brake system continues to function normally, but without the functions listed above. The front and rear wheels coul dtherefore lock, for example, if you brake
hard.
The steerability and braking characteristics may be severely affected. The braking
distance may increas einanemergency braking situation.
If ESP ®
is not operational ,ESP ®
is unable to stabilise the vehicle.
There is an increased dange rofskidding and risk of an accident.
X Observe the additiona ldisplay messages in the multifunction display.
X Drive on carefully.
X Consult aqualified specialist worksho pimmediately.
If the ABS control unit is faulty, there is alsoap ossibility that other systems,such
as the navigation system or the automatic transmission, willbeu navailable.J÷
!
N
The red brake system warning lamp and the yellow ESP ®
and ABS warning lamps
light up while the engine is running.
ABS and ESP ®
are faulty.
Other driving and driving safety systems may alsobef aulty.
G WARNING
The brake system continues to function normally, but without the functions listed above. The front and rear wheels coul dtherefore lock, for example, if you brake
hard.
The steerability and braking characteristics may be severely affected. The braking
distance may increas einanemergency braking situation.
If ESP ®
is not operational ,ESP ®
is unable to stabilise the vehicle.
There is an increased dange rofskidding and risk of an accident.
X Observe the additiona ldisplay messages in the multifunction display.
X Drive on carefully.
X Consult aqualified specialist worksho pimmediately. Warning and indicator lamps in the instrument cluster
287On-board computer and displays Z

Adjusting th
evolume X
Turn th ethumbwheel on th eright of th econ-
troller.
The volume is adjusted:
R for th ecurrentl yselected media source
R during traffic or navigation announcements
R in hands-free mod eduring aphone call
Switchin gthe soun don/off This function is no
tavailable for Mercedes-AMG
vehicles wit hselectable AM GPerformance
exhaust system.
X Press th ethumbwheel to th eright of th econ-
troller.
If th eaudio output is switched off ,the status
lin ew ill sho wthe 8 symbol. If you switch
th em edia source or set th evolume, th esound
is automatically switched on.
i Navigation message
swill be hear devenif
th es oun dism uted.
Functions The multimedia system has th
efollowin gfunc-
tions:
R radi omode
R media mod ewithm edia search
R soun dsystems
R navigation system
COMAND Online: navigation via th ehardd rive
Audio 20 :navigation via SD card
R communication functions
R vehicl efunction swiths ystem settings
R favourite sfunctions
Controller The controller in th
ecentre console let syou:
R select men uitems on th edisplay
R ente rcharacters
R select adestination on th emap
R sav eentries
The controller can be:
R turned 3
R slid lef torright1
R slid forward sorback4 R
slid diagonally 2
R presse dbriefl yorp ressedand held 7
Back button You can use the
%buttontoe xitam enuorto
call up th ebasic display of th ecurren toperating
mode.
X To exit th emenu: brieflypress the %
button.
The multimedia system changes to th enext
higher men ulevel in th ecurren toperating
mode.
X To call up th ebasic display: press the%
butto nfor longer than two seconds.
The multimedia system changes to th ebasic
display of th ecurren toperating mode. Touchpad
Switchin gthe touchpad on/off Multimedia system:
X Select Vehicle
VehicleQSy stem set‐
System set‐
tings tingsQ Activate touchpad
Activate touchpad.
The touchpad is activated Oor deactivated
ª.
Operating th etouchpad :
Touch-sensitive surface
; Favourite sbutton
= Calls up audio and telephon emenu( quick
access)
? Return stotheprevious display Operating system
297Multimedia system Z

Settings in the bottom bar of the cli-
matec ontrol menu Activating/deactivating cooling with air
dehumidification
X Call up the climate control menu
(Y page 300).
X Slide 6the controller repeatedly until the
bottom bar is activated.
X To select O
O A/C
A/C:t urn and press the control-
ler.
X Switch cooling with air dehumidification on
O or off ª.
i The current status of the cooling function is
displayed in the climate control bar: A/C ON
–a ctivated, A/C OFF –deactivated.
i Deactivating the cooling with air dehumidi-
fication function reduces fuel consumption.
Synchronising the climate control set-
tings Use O
O Sync. Sync. (synchronisation )toselect the
climate control settingf or all zones togetherO
or separately ª.
X Call up the climate control menu
(Y page 300).
X Slide 6the controller repeatedly until the
bottom bar is activated.
X To select O
O Sync. Sync.:t urn and press the con-
troller.
X Switch the synchronisation function on Oor
off ª.
For further information on synchronising cli-
mate control settings, see (Y page 133).Navigation mode
Important safety notes G
WARNING
Operating the integrated information systems and communications equipment in the vehicle
while driving will distract you from traffic con-
ditions. You could then lose control of the
vehicle. There is arisk of an accident.
Only operate these devices if road traffic con-
ditions permit. If you are unsure about the surrounding conditions, pull over to
asafe
location and make entries only while the vehi- cle is stationary.
You must observe the legal requirements for the countryinw hich you are currently driving when
operating the navigation system.
General notes Correct functioning of the navigation system
depends, amongst other things, on GPS recep-
tion. In certain situations, GPS reception may be
impaired, there may be interference or there
may be no reception at all, e.g. in tunnels or
multi-storey car parks.
Audio 20 is equippedw ith Garmin®
MAP PILOT
(see the manufacturer's operating instructions).
The Garmin ®
MAP PILOT operating instructions
are stored on the SD memory card as aPDF file.
The SD card box contains aquick guide.
The following descriptions apply to navigation
with COMAND Online. Further information can
be found in the Digital Owner's Manual.
Selecting aroute type and route options Multimedia system:
X Select Navi NaviQNavigation Navigation.
The map displayst he current vehicle position.
X Slide 6the controller.
X Select Options
OptionsQRoute settings Route settings.
Notes for route types:
R Eco route
Eco route
R Dynamic route
Dynamic route
Traffic reports on the route for the route guid-
ance are taken into account.
R Calculate alternative routes Calculate alternative routes
Differen troutes are being calculated. Instead
of Start Start select the Continue Continue menu item.
Notes for route options:
R Use toll roads
Use toll roads
The route calculation includes roads which
require you to pay ausage fee (toll).
R Use vignette roads
Use vignette roads (not available in all
countries)
The route calculation includes roads which
require you to pay atime-based fee (vignette).
Av ignett eallowst emporary use of the route
network,e .g.10d ays or 1year. Operating system
301Multimedia system Z

Enterin
ganaddress Multimedia system:
X Select Navi
NaviQNa vigation
Navigation.
The map displays th ecurren tvehicle position.
X Slide 6thec ontroller.
X Select Destination
DestinationQ Addressentry
Addres sentry.
Ente rana ddress, e.g .asfollows:
R town or postcode, street ,house number
R country, town or postcode
R town or postcode, centre
R street ,tow norp ostcode, junction
X Select Town
Town.
The town in whic hthe vehicle is currently
locate d(curren tvehicle position )isatthetop.
Below this, you will see locations for which
rout eguidance has alread ybeen carried out.
X Ente rthe town.
The Gsymbol: th elocatio niscontained on
th ed igital map multiple times.
X To switch to th elist: slide 5thec ontrol-
ler.
X Select th elocation.
If available, th epostcod eisshown. If there
are differen tpostcodes availabl efor th eloca-
tion, th ecorrespondin gdigitsare displayed
with an X
X.
X Ente rthe street and house number.
The address is in th emenu.
Further options for destination entry:
R search for akeyword
The keyword search finds destination susing
fragment sofwords.
R selec tthe last destination
R selec tacontact
R selec taPOI
You can search for aPOI by location, nam eor
telephone number.
R selec tadestination on th emap
R enter an intermediat edestination
You can map th erout etot hedestination
yourself with up to four intermediat edestina-
tions.
R selec tatravel guide destination (only availa-
ble for selecte dEuropean countries)
R selec tdestination sfromM ercedes-Benz
Apps
R selec tgeo-coordinates Calculating th
eroute Prerequisite: th
eaddress has been entered and
is in th emenu.
X Select Start
StartorContinue
Continue.
The rout eiscalculate dwith th eselecte droute
type and th eselecte drout eoptions.
If rout eguidance has alread ybeen activated,
ap rompt will appear asking whether you wish
to end th ecurren trout eguidance.
X Select Yes
YesorSet as intermediate des‐
Set as intermediate des‐
tination
tination.
Yes Yes cancel sthe curren trout eguidance and
start srout ecalculation to th enew destina-
tion.
Set as intermediate destination Set as intermediate destination adds
th en ew destination in addition to th eexisting
destination and open sthe intermediat edes-
tinations list. Connecting th
emobile phone
Requirements For telephony via th
eBluetooth ®
interface, you
require aBluetooth ®
-capable mobile phone. The
mobile phon emust support Hands-Free Profile
1. 0ora bove.
Multimedia system:
X Select Vehicle
VehicleQSy stem set‐
System set‐
tings
tingsQ Activate Bluetooth
Activate Bluetooth .
X Activate Bluetooth ®
O.
Mobil ephone:
X Activate Bluetooth ®
and, if necessary, Blue-
tooth ®
visibilit yfor other devices (see the
manufacturer' soperatin ginstructions).
The Bluetooth ®
device names for all of on eman-
ufacturer' sproduct smightbei dentical. To
mak eitp ossible to clearly identif yyour mobile
phone, chang ethe device nam e(see th eman-
ufacturer' soperatin ginstructions).
If th emobile phon esupport sthe PBA P(Phone
Book Access Profile) and MA P(Message
Acc ess Profile) Bluetooth ®
profiles ,the follow-
ing informatio nwill be transmitte dafter you
connect:
R phon ebook
R call lists
R messages 302
Operating systemMultimedia system

for example, request an appointment or call for
help in the event of abreakdown.
The Audi o20/COMAND Online display indi-
cates that acall is active. During the call ,you
can change to the navigation menu by pressing
the NAVI button on the multimedi asystem ,for
example.
Voice outpu tisnot available in this case.
You can find more information on Mercedes-
Benz Contact in the separate multimedi asys-
tem operating instructions.
Breakdown assistance call button X
To call breakdow nassistance: press but-
ton :for breakdown assistance.
The breakdown assistance call is initiated.
The Connecting call
Connecting call message appears in
the multifunction display .The audio system is
muted.
Only in certain countries :avoice message
prompts you to confirm the data transmis-
sion. After confirmation, the required vehicle
data is transmitted. During data transmission, you wil lsee acorresponding symbol in the
display .This may take amoment. You are
then connected to an employee.
X To end acall: press the ~button on the
multifunction steering wheel.
or X Press the corresponding multimedi asystem
button for ending aphone call.
Info call button This function is not available in all countries. X
To call: press info call button :.
The breakdown assistance call is initiated.
The Connecting call Connecting call message appears in
the multifunction display .The audio syste mis
muted.
Only in certain countries :avoice message
prompts you to confirm the data transmis-
sion. After confirmation, the required vehicle
data is transmitted. During data transmission,
you wil lsee acorresponding symbol in the
display .This may take amoment. You are
then connected to an employee.
X To end acall: press the ~button on the
multifunction steering wheel.
or
X Press the corresponding multimedi asystem
button for ending aphone call. Floormats
G
WARNING
Objects in the driver's footwell may restrict
the clearance around the pedals or block a
depressed pedal. This jeopardise sthe oper-
ating and road safety of the vehicle. There is a risk of an accident.
Stow all objects securely in the vehicl esothat
they do not get into the driver's footwell.
Always fit the floormats securely and as pre-
scribe dinorder to ensure that there is always
sufficient room for the pedals. Do not use
loos efloormats and do not place severa lfloor-
mats on top of one another. Features
319Stowing and features Z