warning light MERCEDES-BENZ C-Class COUPE 2017 CL205 Manual Online

tance Center. The Customer Assistance Center
thenforwards thisi nformation to you.
Yo uc an select the wa yinwhich yo ureceive this
information beforehand .Possibl eoptions
includ etext message ,e-mail or an automated
call.
The data yo ureceive contains the following
information:
Rthe location where the spee dlimit wasexcee-
ded
Rthe tim eatwhich the spee dlimit wase xcee-
ded
Rthe selected spee dlimit which wa sexceeded
Geof encing
Geofencing allows yo utoselect areaswhich the
vehicl eshoul dnot ente rorleave .You will be
informed if the vehicl ecrossest he boundaries
of the selected areas. Yo ucan select the wa yin
which yo ureceive thisi nformation beforehand.
Possibl eoptions includ etext message ,e-mail or
an automated call.
The area can be determine daseitherac ircle or
ap olygon withamaximum of ten corners. You
can specify up to ten area ssimul taneously .Dif-
ferent setting sarepossibl efor each area.
These setting scan be calle dupunder "Owners
Online "athttp://www.mbusa.com.
Alternatively ,you can trigge ranMBInfo calland
inform the custome rservice representative that
yo uw ishtoa ctivate ge ofencing.
Currently inactiv eareas can be activated by text
message.
Triggerin gthe vehicle alarm
With thisf unction, yo ucan trigge rthe vehicle's
panic alar mvia text message .Analarmsounds
and the exterio rlighting flashes. Depending on
the setting ,the panic alar mlasts fiv eort en sec-
onds. Afterwards ,the alar mswitches off.
Garaged ooro pener
General notes
The HomeLink®garage door opene rintegrated
in the rear-view mirrora llowsyou to operate up
to thre edifferent door and gate systems. Use the integrated garage door opene
ronlyo n
garage doors that:
Rhave safety stop and revers efeatures and
Rmee tcurrent U.S. federa lsafety standards
Once programed ,the integrated garage door
opene rinthe rear-view mirrorw illa ssum ethe
functio nofthe garage door system's remote
control. Please also rea dthe operating instruc-
tions for the garage door system.
When programming agarag edooro pener, park
the vehicl eoutside the garage .Donot runt he
engine whil eprogramming.
Certain garage door drives ar eincompatible
with the integrated garage door opener. If you
have difficulty programing the integrated garage
door opener, contact an authorize dMercedes-
Benz Center.
Alternatively ,you can cal lthe following tele-
phone assistance services:
RUSA: Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
RCanada: Customer Service at
1-800-387-0100
RHomeLink®hotline 1-800-355-3515 (free of
charge)
Mor einformation on HomeLink
®and/or com-
patible products is also availabl eonline at
http://www.homelink.com .
No

te sont he declaratio nofconformity
(
Ypage 28).
USA: FCC ID: CB2HMIHL4
Canada: IC:2 79B-HMIHL4
Important safety notes
GWARNING
When yo uoperate or progra mthe garage door
with the integrated garage door opener, per-
son sint he range of movement of the garage
door can become trapped or struck by the
garage door. There is ariskofi njury.
When using the integrated garage door
opener, always make sure thatn obodyis
withint he range of movement of the garage
door.
GWARNING
Combustion engine semitp oiso nous exhaust
gasess uchasc arbonmonoxide. Inhaling
Features283
Stowag eand featur es
Z

Garage door system witharolling code: indi-
cator lamp :flashes green.
The transmitte rwill transmit asignal as long
as th ebutton is pressed. The transmission is
halted after amaximum of te nseconds and
indicator lamp :lightsupy ellow.
XPress button ;,=or? again if necessary.
Clearing th ememory
Makes ure that you clear th ememory of the
integrate dgarag edoor opener before sellingt he
vehicle.
XTurn th eSma rtKey to position 2in th eignition
lock(Ypage 131).
XPress and hold buttons ;and ?.
The indicator lamp initially lightsupy ellow
and then green.
XRelease buttons ;and ?.
The memory of th eintegrate dgarag edoor
opener in th erear-view mirror is cleared.
Floormats
GWARNING
Object sinthedriver'sf ootwell can restrict the
pedal travel or obstruc tadepressedp edal.
The operatin gand road safety of th evehicle is
jeopardized. Thereisar isk of an accident.
Makes ure that all object sinthevehicle are
stowed correctly, and that they canno tenter
th ed river'sf ootwell. Install th efloormats
securely and as specified in order to ensure
sufficient clearance for th epedals.Don otuse
loosef loormats and do no tplace floormats on
to pofo neanother.
XSlid ethe relevan tseat back.
XTo install: place thefloormat in th efootwell.
XPress studs :onto retainers ;.
XTo remove:pull thefloormat off retainers ;.
XRemovethefloormat.
286Features
Stowage and features

XMake sure that the windshield wipers are
turned off.
XPull release lever:on the hood.
The hood is released.
XReach into the gap, pull hood catch handle ;
up and lift the hood.
If you lift the hood by approximately 15 in
(40 cm), the hood is opened and held open
automatically by the gas-filled strut.
Closing the hood
XLower the hood and let it fall from aheight of
approximately 8in(20 cm).
XCheck that the hood has engaged properly.
If the hood can be raised slightly, it is not
properly engaged. Open it again and close it
withalittle more force.
Radiator
Do not cover up the radiator, such as with a
thermal mat or insect protection cover. The
readings of the on-board-diagnostic system may
otherwise be inaccurate. Some of these read-
ings are required by law and must be accurate at
all times.
Engine oil
Important safety notes
GWARNING
Certain components in the engine compart-
ment, such as the engine, radiator and parts
of the exhaust system, can become very hot.
Working in the engine compartmentp oses a
risk of injury.
Where possible, let the engine cool down and touch only the components described in the
following.
GWARNING
If engine oil comes into contact with hot com- ponentsint he engine compartment, it may
ignite. There is arisk of fire and injury.
Make sure that engine oil is not spilled next to
the filler neck.L et the engine cool down and
thoroughly clean the engine oil off the com-
ponentsb efore startin gthe engine.
General notes
Depending on your driving style, the vehicle
consumes up to 0.9 US qt (0.8 liters) of oil per
600 miles (1,000 km). The oil consumption may
be higher than this when the vehicle is new or if
you frequently drive at high engine speeds.
Depending on the engine, the oil dipstick may be
inad ifferent location.
When checking the oil level:
Rpark the vehicle on alevel surface
Rthe engine should be switched off for approx-
imately five minutes if the engine is at normal
operating temperature
Rall vehicles (except Mercedes-AMG C63/C
63S): if the engine is not at normal operating
temperature, e.g. if the engine was only star-
ted briefly, wait approximately 30 minutes
before carrying out the measurement
The oil level of the Mercedes-AMG C63/C 63 S
must be checked only when the engine is at
normal operating temperature.
288Engine compartment
Maintenance and care

when theengine is switche doff or at very
low speeds.O therwise, when in transmis-
sion position Dor Rthea utomatic trans-
mission will automatically switch to park
position Pand blockt hewheels.
ROperatin gwith th eStart/Stop button:
Do not open th edriver's door when the
engine is switche doff or at veryl ow
speeds.O therwise, when in transmission
position Dor Rth ea utomatic transmission
will automatically switch to park position P
and blockt hewheels.
Observe th efollowing to makes ure that the
automatic transmission stays in position Nneu-
tral:
Operatin gwith th eSmartKey and th eStart/
Stop button:
XMake sure that th eignitio nisswitche don.
XMake sure that th evehicle is stationary.
XDepress and hold th ebrakep edal.
Operatin gwith th eStart/Stop button only:
XEngage park position P.
XRelease thebrakep edal.
XRemoveS tart/Stop button fromi gnitionlock
(Ypage 131).
XInsert th eSmartKey int othe ignitio nlock.
XSwitch on th eignition.
XDepress and hold th ebrakep edal.
Operatin gwith th eSmartKey and th eStart/
Stop button:
XShif tton eutral N.
XRelease th ebrakep edal.
XRelease th eelectric parking brake, if neces-
sary.
XSwitch off th eignitio nand leave th eSma rtKey
in th eignitio nlock.
You can wash th evehicle in an automatic car
wash fromt heverys tart.
If th evehicle is veryd irty, pre-wash it bef

ore
cleaning it in an automatic car wash.
After using an automatic car wash, wipe off wax
fromt hewindshield and th ewiper blades. This
will prevent smearsa nd reducewiping noises
caused by residue on th ewindshield.
Washing by hand
In some countries, washingbyh and is only
allowed at specially equipped washingb ays.
Observe th elegal requirements in each country.
XDo not use hot water and do not wash the
vehicle in directs unlight.
XUseasofts ponge to clean.
XUse amild cleaning agent, such as acar
shampoo approved by Mercedes-Benz.
XThoroughly hose down th evehicle with agen-
tle jet of water.
XDo not pointt hewater jet directly towards the
air inlet.
XUse plenty of water and rinse out th esponge
frequently.
XRinse th evehicle with clean water and dry
thoroughly with achamois.
XDo not let th ecleaning agentd ry on thepaint-
work.
Carefull yremove all deposits of road salt as
soon as possible when driving in winter.
Power washers
GWARNING
The water jet fromac ircular jet nozzle (dirt
blasters) can cause invisible exterior damage
to th etires or chassis components. Compo-
nents damaged in this way may fail unexpect-
edly. Thereisar isk of an accident.
Do not use power washersw ith circular jet
nozzles to clean th evehicle. Have damaged
tires or chassis component sreplaced imme-
diately.
!Always maintain adistanc eofatl east
11.8 in (30 cm) between th evehicle and the
power washer nozzle. Information about the
correctd istanceisavailable fromt heequip-
mentm anufacturer.
Move th epower washer nozzle aroundw hen
cleaning your vehicle.
Do not aim directly at any of th efollowing:
Rtires
Rdoor gaps, roof gaps, joints, etc.
Relectrical components
Rbattery
Rconnectors
Care293
Maintenance and care
Z

Cleaning thevehicle parts
Cleaning th ewheels
GWARNING
The wate rjet from acircular je tnozzle (dirt
blasters)c an causeinvisible exterior damage
to th etires or chassis components .Compo-
nent sdamaged in this way may fail unexpect-
edly. Thereisar iskofana ccident.
Do no tuse power washers withc ircular jet
nozzles to clean th evehicle .Haved amaged
tires or chassis components replaced imme-
diately.
!Do no tuse acidic wheel cleanin gproducts
to remove brak edust.T his coul ddamage
wheel boltsa nd brakecomponents.
!Do no tpark th evehicle for an extended
period straigh tafter cleanin git, particularly
after having cleane dthe wheelsw ithwheel
cleaner. Wheelc leaners couldcause
increased corrosion of th ebrak ediscsa nd
brak epads/linings. For this reason,y ou
should driv efor afew minute safter cleaning.
Brakin gheatst hebrak ediscsa nd thebrake
pads/linings, thus dryin gthem. The vehicle
can then be parked.
Cleaning th ewindows
GWARNING
You coul dbecome trapped by th ewindshield
wipersift heys tart moving while cleanin gthe
windshield or wiper blades.T hereisarisko f
injury.
Always switch off th ewindshield wipersa nd
th ei gnition before cleanin gthe windshield or
wiper blades.
!Do no tuse dry cloths, abrasive products,
solvents or cleanin gagents containing sol-
vents to clean th einside of th ewindows. Do
no ttou ch th einsides of th ewindows with
hard objects, e.g .anice scrape rorring. There
is otherwise ariskofd amaging th ewindows.
!Clean th ewaterdrainage channels of the
windshield and th erear window at regular
intervals. Deposits suchasl eaves, petals and
pollenm ay undercertain circumstances pre- ven
twate rfromd raining away. This can lead
to corrosion damagea nd damagetoelec-
tronic components.
XClean th einside and outside of th ewindows
withad amp cloth and acleanin gproduct that
is recommended and approved by Mercedes-
Benz.
Cleaning wiper blades
GWARNING
You coul dbecome trapped by th ewindshield
wipersift heys tart moving while cleanin gthe
windshield or wiper blades.T hereisarisko f
injury.
Always switch off th ewindshield wipersa nd
th ei gnition before cleanin gthe windshield or
wiper blades.
!Do no tpull th ewiper blade. Otherwise, the
wiper blade coul dbedamaged.
!Do notclean wiper blades to ooften and do
no trub them to ohard .Otherwise, th egraph-
ite coatin gcoul dbed amaged. This could
caus ewiper noise.
!Holdthe wiper arm securely when folding
back .The windshield coul dbedamaged if the
wiper arm smacks against it suddenly.
XFol dthe windshield wiper arm saway from the
windshield (Ypage 116).
XCarefully clean th ewiper blades withad amp
cloth.
XFol dthe windshield wiper arm sback again
before switching on th eignition.
Cleaning th eexterior lighting
!Only use cleanin gagents or cleanin gcloths
whicha re suitable for plastic light lenses.
Unsuitable cleanin gagents or cleanin gcloths
coul dscratch or damag ethe plastic light len-
ses.
XClean th eplastic lenses of th eexteri or light-
ing usingaw et sponge and amild cleaning
agent, e.g .Mercedes-Ben zcar shampoo or
cleanin gcloths.
Care295
Maintenance and care
Z

Cleaning themirror turn signals
!Only use cleanin gagents or cleanin gcloths
that are suitable for plastic lenses.U nsuitable
cleanin gagents or cleanin gcloth scould
scratch or damag ethe plastic lenses of the
mirror tur nsignals.
XClean th eplastic lenses of th emirror tur nsig-
nals in th eexteri or mirror housing usingaw et
sponge and mild cleanin gagent, e.g.
Mercedes-Ben zcar shampoo or cleaning
cloths.
Cleaning th esensors
!If you clean th esensorsw ithapower
washer, mak esure that you keep adistance
of at least 11.8 in (30 cm)between the vehicl e
and th epower washer nozzle. Information
about th ecorrec tdistanc eisavailabl efrom
th ee quipment manufacturer.
XClean sensors :of th edriving systems with
water, car shampoo and asoftc loth.
Cleaning th erearv iew camera and 360°
camera
!Do no tclean th ecamera lensa nd thearea
aroun dthe rear view camera or 360°camera
with ahigh-pressurew aterjet.
XMakes ure that th evehicle is stationar yand
that th eSmartKey is in position 2in th eigni-
tio nlock.
XOpen th ecamera cover for cleanin gvia the
multimedia system (see th eseparate operat-
ing instructions).
XTo clean th ecamera: use clean wate rand a
softc loth to clean camera lens :.
360°camera: if you driveatspeeds above
20 mph (30 km/h) or with th eSma rtKey in posi-
tion 0or 1in th eignition lock, th ecover of the
360° camera closes automatically.
Cleaning th eexhaust pipes
GWARNING
The exhaust tail pipe and tail pipe trim can
become ver yhot.Ify ou com eintoc ontact
with these part softhevehicle ,you coul dburn
yourself. Thereisar isk of injury.
Always be particularly careful aroun dthe
exhaust tail pipe and th etail pipe trim. Allow
these component stocooldown before touch-
ing them.
!Do no tclean th eexhaust pipe with acid-
based cleanin gagents ,suchasb athroom
cleaner or wheel cleaner.
!Mercedes-AM Gvehicle swith black exhaust
pipes:t heblack-chrome tailpipe finishers
shouldn otbe polished with achrom epolish.
They will otherwise lose their black sheen. For
optimal care, th efaceplates shouldber ubbed
with alightly oiled cloth after everyc ar wash.
Commercially availabl eengine and car eoils
are suitable for this.
For heavier soiling, you can apply afinep aint-
work polishw itham icrofiber cloth .Remove
th ee xcess polishr esidue after polishing.
296Care
Maintenance and care

Note that regular care is essential to ensure that
the appearance and comfort of the covers is
retained over time.
Genuine leather seat covers
!To retain the natural appearance of the
leather, observe the following cleaning
instructions:
RClea ngenuine leather covers carefully with
ad amp cloth and then wipe the covers
down with adry cloth.
RMake sure that the leather does not
become soaked. It may otherwise become
rough and cracked.
ROnly use leather care agents that have
been tested and approve dbyMercedes-
Benz. You can obtain these from aqualified
specialist workshop.
Leather is anatural product.
It exhibits natural surface characteristics, for
example:
Rdifferences in the texture
Rmarks caused by growth and injury
Rslight nuances of color
These are characteristics of leather and not
material defects.
Seat covers of other materials
!Observe the following when cleaning:
Rclean artificia lleather covers with acloth
moistened with asolutio ncontaining 1%
detergent (e.g. dish washing liquid).
Rclean cloth covers with amicrofiber cloth
moistened with asolutio ncontaining 1%
detergent (e.g. dish washing liquid). Rub
carefully and always wipe entire seat sec-
tions to avoid leaving visiblel ines. Leave
the seat to dry afterwards. Cleaning results
depend on the type of dirt and how long it
has been there.
Rclean DINAMICA covers with adamp cloth.
Make sure that you wipe entire seat sec-
tions to avoid leaving visiblel ines.
Cleaning the seat belts
GWARNING
Seat belts can become severely weakened if
bleached or dyed .This could cause the seat
belts to tear or fail, for instance, in the event of
an accident. This poses an increased risk of
injury or fatal injury.
Never bleach or dye the seat belts.
!Do not clean the seat belts using chemical
cleaning agents. Do not dry the seat belts by
heating at temperatures above 176 ‡(80 †)
or in direct sunlight.
XUse clean, lukewarm water and soaps olution.
Cleaning the headliner and carpets
XHeadliner:if it is very dirty ,use asoft brus hor
dry shampoo.
XCarpets: use the carpe tand textile cleaning
agents recommended and approved by
Mercedes-Benz.
298Care
Maintenancea nd care

XRemove filler hoseB and connecto r= from
th eb otto msection of th etirei nflation com-
presso rhousing ;.
XSlide th eyellow filler hos econnector intothe
mounting on yellow cap Aof tire sealan tfiller
bottl e: until th econnector engages.
XWiththe sealing rings in front, slid eyellow cap
A of tire sealan tfiller bottl e: intot he
mounting of tire inflation compressor ;.The
cap mus tengage in bot hhooks .
XRemove th ecap from valv eC on th efault y
tire.
XScrew filler hos eD onto valv eC.
XInser tconnector =intoas ocke tinyour vehi-
cle .
Cigarette lighte rsocket: (
Ypage 275)
12 Vsocket: (
Ypage 276)
Observ ethe note sont hecigarette lighte r
(
Ypage 275). Observ ethe note sons ockets
(Ypage 276).
XTurn th eSma rtKey to position 1in th eignition
loc k(Ypage 131).
XPress on and off switch ?on th etirei nflation
compressor to ON.
The tire inflation compressor is switched on .
The tire is inflated. First
,tires ealan tispumped int othe tire. The
pressur emay briefly ris etoapproximately
50 0k Pa (5 bar/7 3psi).
Do not swi tcho ff th etirei nflation com -
pressor during this phase .
XLet thetirei nflation compressor run for a
maximum of te nminutes. The tire should then
hav eattained apressur eofatl east 200kPa
(2. 0b ar/2 9psi).
If ap ressur eof200 kPa( 2.0b ar/29 psi) has
been attained after fiv eminutes, see "Tir epres-
sur ereached" (
Ypage 304).
If at irep ressur eof200 kPa(2.0 bar/29 psi) has
not beena ttained after five minutes ,see "Tire
pressure not reached" (
Ypag e303).
If tire sealant has escaped, clea nitoff affected
area sasq uickly as possible. Use plain water i
f
possible.
If you rclothes are soiled with tire sealant, have
them cleaned with perchloroethylene at adry
cleaner as soon as possible.
Tire pressure not reached
If at ire pressure of 200 kPa (2.0 bar/29 psi) has
not beena ttained after ten minutes:
XSwitch off the tire inflation compressor.
XUnscrew the filler hose from the valve of the
faulty tire.
Note that tire sealant may escap ewheny ou
unscrew the filler hose.
XVery slowly drive forwards or reverse approx- imately 30 ft (10 m).
XPump up the tire again.
After amaximu moften minutes ,the tire pres-
sure must be at least 200 kPa (2.0 bar/
29 psi).
GWARNING
If the required tire pressure is not reached
after the specified time, the tire is too badly
damaged. The tire sealant cannot repair the
tire in this instance. Damaged tires and atire
pressure that is too low can significantly
impair the vehicle's braking and driving char-
acteristics. There is arisk of accident.
Do not continue driving. Contact aqualified
specialist workshop.
Flat tire303
Breakdowna ssistance
Z

XPull the tire sealant bottle out of the tire infla-
tion compressor.
The filler hose remains attached to the tire
sealant bottle.
XDrive to the nearest qualified specialist work-
shop and have the tire changed there.
XHave the tire sealant bottle and the filler hosereplaced as soon as possible at aqualified
specialist workshop.
XHave the tire sealant bottle replaced every
four years at aqualified specialist workshop.
Battery (vehicle)
12 Vb attery –important safety notes
Special tools and expert knowledge are required
when working on the battery, e.g. removal and
installation .You should therefore have all work
involvin gthe battery carried out at aqualified
specialist workshop.
GWARNING
Work carried out incorrectly on the battery
can lead, for example, to ashort circuit and
thus damage the vehicle electronics. This can
lead to function restriction sapplying to
safety-relevant systems, e.g the lighting sys-
tem, the ABS (anti-loc kbraking system) or the
ESP
®(Electronic Stability Program). The oper-
ating safety of your vehicle may be restricted.
You could lose control of the vehicle, for
example:
Rwhen braking
Rin the event of abrupt steerin gmaneuvers
and/or when the vehicle's speed is not
adapted to the road conditions
There is arisk of an accident.
In the event of ashort circuit or asimilar inci-
dent, contact aqualified specialist workshop
immediately. Do not drive any further .You
should have all work involvin gthe battery car-
ried out at aqualified specialist workshop.
For further information about ABS and ESP
®,
see (Ypage 62) and (Ypage 67).
All vehicles except vehicles with alithium-
ion battery:
GWARNING
Electrostatic build-up can lead to the creation of sparks, which could ignite the highly explo-
sive gases of abattery. There is arisk of an
explosion.
Before handling the battery, touch the vehicle
body to remove any existin gelectrostatic
build-up.
The highly flammable gas mixture forms when
charging the battery as well as when jump-start-
ing.
Always make sure that neither you nor the bat-
tery is electrostatically charged. Abuild-up of
electrostatic charge can be caused, for exam-
ple:
Rby wearing clothin gmade from synthetic
fibers
Rdue to friction between clothin gand seats
Rif you push or pull the battery across the car-
pet or other synthetic materials
Rif you wipe the battery with acloth
GWARNING
During the charging process, abattery produ-
ces hydrogen gas. If ashort circuit occurs or
sparks are created, the hydrogen gas can
ignite. There is arisk of an explosion.
RMake sure that the positive terminal of a
connected battery does not come into con-
tact with vehicle parts.
RNever place metal object sortools on abat-
tery.
RIt is importan tthat you observe the descri-
bed order of the battery terminals when
connectin gand disconnectin gabattery.
RWhen jump-starting, make sure that the
battery poles with identical polarity are
connected.
RIt is particularly importan ttoobserve the
described order when connectin gand dis-
connectin gthe jumper cables.
RNever connect or disconnect the battery
terminals while the engine is running.
GWARNING
Battery acid is caustic. There is arisk of injury.
Battery (vehicle)305
Breakdown assistance
Z

Jump-starting
For the jump-starting procedure, use only the jump-starting connection point in the engine com-
partment,consisting of apositive terminal and aground point.
All vehiclese xcept vehiclesw ithalithium-ion battery:
GWARNING
Battery acid is caustic. There is arisk of injury.
Avoid contact with skin, eyes or clothing. Do not inhale any battery gases. Do not lean over the
battery. Keep children away from batteries. Wash away battery acid immediately with plenty of
clean water and seek medical attention.
GWARNING
During charging and jump-starting, explosive gases can escape from the battery. There is arisk
of an explosion.
Particularly avoid fire, open flames, creating sparks and smoking. Ensure there is sufficient ven-
tilation while charging and jump-starting. Do not lean over abattery.
GWARNING
During the charging process, abattery produces hydrogen gas. If ashort circuit occurs or sparks
are created, the hydrogen gas can ignite. There is arisk of an explosion.
RMake sure that the positive terminal of aconnected battery does not come into contact with
vehicle parts.
RNever place metal objects or tools on abattery.
RIt is important that you observe the described order of the battery terminals when connecting
and disconnecting abattery.
RWhen jump-starting, make sure that the battery poles with identical polarity are connected.
RIt is particularly important to observe the described order when connecting and disconnecting
the jumper cables.
RNever connect or disconnectt he battery terminals while the engine is running.
GWARNING
Ad ischarged battery can freeze at temperatures below freezing point. When jump-starting the
vehicle or charging the battery, gases can escape from the battery. There is arisk of an explosion.
Allow the frozen battery to thaw out before charging it or jump-starting.
If, at low temperatures, the indicator lamps/warning lamps in the instrument cluster do not light up,
it is highly likely that the discharged battery has frozen.Int his case, you may neither charge the
battery nor jump-start the vehicle. The service life of athawed-out battery may be shorter. The
starting characteristicsc an be impaired, particularly at low temperatures. Have the thawed-out
battery checked at aqualified specialist workshop.
All vehicles:
!Avoid repeated and lengthy starting attempts. Otherwise, the catalytic converter could be
damaged by the non-combusted fuel.
308Jump-starting
Breakdown assistance