multifunction display messages MERCEDES-BENZ C320 2003 W203 Owner's Manual

111 Controls in detail
Control system
Control system
The control system is activated as soon as
the key in the starter switch is turned to
position1. The control system enables you
to

call up information about your vehicle


change vehicle settings
For example, you can use the control
system to find out when your vehicle is
next due for service, to set the language
for messages in the instrument cluster
display, and much more.
The control system relays information to
the multifunction display.
Multifunction display
1Outside temperature
2Main odometer
3Trip odometer
4Automatic transmission program mode
5Current gear selector lever position
6Digital clock
iThe displays for the audio systems
(radio, CD player, cassette player) will
appear in English, regardless of the
language selected.
Warning!
G
A driver’s attention to the road and traffic
conditions must always be his /her primary
focus when driving.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions
permit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet
(approximately 13.5 m) every second.

119 Controls in detail
Control system

Press button
è
or
ÿ
repeatedly
until you see the malfunction message
memory in the display.
No malfunction messages
If no malfunctions have occured, the
message in the display is:
NO MALFUNCTIONMalfunctions have occurred
If malfunctions have occurred, you will see
the number of malfunctions in the display:
1Number of malfunctions

Press button
k
or
j
.
The stored messages will now be dis-
played in order. See the “Practical
hints” section for malfunction and
warning messages (
page 261).
Should any malfunctions occur while
driving, the number of malfunctions will
reappear in the display when the key in the
starter switch is turned to position0 or
removed from the starter switch.
Settings menu
In the
SETTINGS
menu there are two
functions:


The function
RESET TO FACTORY
SETTINGS
, with which you can reset all
the settings to the original factory
settings.


A collection of submenus with which
you can make individual settings for
your vehicle.

Press button
è
or
ÿ
repeatedly
until the
SETTINGS
menu is seen in the
display.
iThe message memory will be cleared
when you turn the key in the starter
switch to position1 or2. You will then
only see high-priority messages in the
multifunction display (
page 261).

124 Controls in detailControl systemSelecting language
Move the selection marker with
the
æ
or
ç
button to the
INSTRUMENT CLUSTER
submenu.

Press button
j
or
k
repeatedly
until you see this message in the
display:
TEXT
.
The selection marker is on the current
setting.

Press
æ
or
ç
to select the
language to be used for the
multifunction display messages.Available languages:


German


English


French


Italian


SpanishSelecting display (speed display or
outside temperature)

Move the selection marker with
the
æ
or
ç
button to the
INSTRUMENT CLUSTER
submenu.

Press button
j
or
k
repeatedly
until you see this message in the
display:
SELECT DISPLAY
.
The selection marker is on the current
setting.

Press
æ
or
ç
to select the
display permanently shown in the
multifunction display.

134 Controls in detailControl systemTEL menu*
You can use the functions in the
TEL
menu
to operate your telephone, provided it is
connected to a hands-free system and
switched on.

Switch on the telephone and
COMAND*.

Press button
ÿ
or
è
on the
steering wheel repeatedly until you see
the
TEL
menu in the display.Which messages will appear in the display
field depends on whether your telephone is
switched on or off:


If the telephone is off, the message in
the multifunction display is:
TEL OFF
.


If the telephone is on:
The telephone will then search for a
network. During this time the display is
empty.
As soon as the telephone has found a
network,
READY
is indicated in the
display.
1Signal strength
Warning!
G
A driver’s attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we
recommend that you pull over to a safe
location and stop before placing or taking a
telephone call. If you choose to use the
telephone while driving, please use the
hands-free device and only use the
telephone when weather, road and traffic
conditions permit.
Some jurisdictions prohibit the driver from
using a cellular telephone while driving a
vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of approximately
44 feet (approximately 13.5 m) every
second.
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system,
possibly resulting in an accident and
personal injury.

237 Operation
Engine compartment
You can check the engine oil level on the
multifunction display.
Turn the key in the starter switch to
position2.
The standard display (
page 116) should
appear in the multifunction display.

Press button
k
or
j
, on the
steering wheel until the following mes-
sage is seen in the multifunction dis-
play:
ENGINE OIL LEVEL - MEASUREMENT IN
PROCESS! CORRECT MEASUREMENT ONLY
IF VEH. LEVEL
After about three seconds this mes-
sage is displayed: ENGINE OIL LEVEL – MEASURING NOWOne of the following messages will sub-
sequently appear in the indicator:

ENGINE OIL LEVEL – OK



ENGINE OIL LEVEL – ADD
1 QUART (1.0 LITER)!


ENGINE OIL LEVEL – ADD
1.5 QUARTS (1.5 LITERS)!


ENGINE OIL LEVEL – ADD
2 QUARTS (2.0 LITERS)!
Adding engine oil
1Filler neck
Unscrew the cap from filler neck1. Be
careful not to overfill with oil.
Be careful not to spill any oil when adding.
Avoid environmental damage caused by oil
entering the ground or water.

Screw the cap back on the filler neck.!Excessive oil must be siphoned or
drained off. It could cause damage to
the engine and catalytic converter not
covered by the Mercedes-Benz Limited
Warranty.

261 Practical hints
What to do if …
Messages in the display
The control system shows warning and
malfunction messages in the multifunction
display.
Certain warning and malfunction messag-
es are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in
this Operator’s Manual.
Selecting the malfunction memory menu in
the control system (
page 118) displays
both cleared and uncleared messages.
High-priority messages appear in the
multifunction display in red color.
Certain messages of high priority cannot
be cleared from the multifunction display
using the reset knob.
Other messages of high priority and
messages of less immediate priority can
be cleared from the multifunction display
using the reset knob (page 22) and are
then stored in the malfunction message
memory (
page 118).On the pages that follow, you will find a
compilation of all the messages that may
appear in the display.
Warning!
G
All categories of messages contain impor-
tant information which should be taken note
of and, where a malfunction is indicated, ad-
dressed as soon as possible at an autho-
rized Mercedes-Benz Center.
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz
Limited Warranty, or result in property dam-
age or personal injury.Warning!
G
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
Contact your nearest authorized
Mercedes-Benz Center.
iTurning the key in starter switch to
position2, causes all lamps as well as
the multifunction display to come on.
Ensure that they are all in working
order before starting your journey.

342 Technical termsCOMAND*
(C
ockpit M
anagement and D
ata
System)
Information and operating center for
vehicle sound and communications
systems, including the radio and navi-
gation system, as well as for other
optional equipment (CD changer,
telephone, etc.).
Control system
The control system is used to call up
vehicle information and to change
component settings. Information and
messages appear in the multifunction
display. The driver uses the buttons on
the multifunction steering wheel to
navigate through the system and to ad-
just settings.
Cruise control
Driving convenience system for auto-
matically maintaining the vehicle speed
set by the driver.Engine number
The number set by the manufacturer
and placed on the cylinder block to
uniquely identify each engine pro-
duced.
Engine oil viscosity
Measurement for the inner friction (vis-
cosity) of the oil at different tempera-
tures. The higher the temperature an
oil can tolerate without becoming thin,
or the lower the temperature it can tol-
erate without becoming viscous, the
better the viscosity.
ESP
(E
lectronic S
tability Pr
ogram)
Improves vehicle handling and direc-
tional stability.
ETD
(E
mergency T
ensioning D
evice)
Device which deploys in certain frontal
and rear collisions exceeding the sys-
tem's threshold to tighten the seat
belts.
->SRSFSS
(F
lexible S
ervice S
ystem)
Service indicator in the multifunction
display that informs the driver when
the next vehicle maintenance service is
due.
Gear range
Number of gears which are available to
the automatic transmission for shifting.
The automatic gear shifting process
can be adapted to specific operating
conditions using the selector lever.
GPS
(G
lobal P
ositioning S
ystem)
Satellite-based system for relaying
geographic location information to and
from vehicles equipped with special re-
ceivers. Employs CD digital maps for
navigation.
Instrument cluster
The displays and indicator/warning
lamps in the driver’s field of vision, in-
cluding the tachometer, speedometer
and fuel gauge.

351 Index
Climate control 148
Adjusting 151
Defogging windshield 151
Defrosting 151
Setting the temperature 150
Clock 23, 122
Closing
Glove box 203
Hood 236
Side windows 187
Sliding/pop-up roof* 190, 289
Sliding/pop-up roof*
with SmartKey 191
Trunk lid 89
Windows 187
Windows with SmartKey 188
Closing sliding/pop-up roof*
In an emergency 289
Cockpit 20, 341
Cockpit management and data system
(COMAND*) 342
COMAND* see separate operating
instructionsCombination switch 104
High beam flasher 47
Turn signals 47
Windshield wipers 48
Consumer information 339
Control and operation of radio
transmitters 230
Control system 111, 342
AUDIO menu 116
Convenience submenu 129
Display digital speedometer 116
Functions 112, 115
Instrument cluster submenu 122
Lighting submenu 125
Malfunction memory menu 118
Menus 114, 115, 343
Multifunction display 111
Multifunction steering wheel 112
NAVI menu* 118
Selecting radio system 117
Settings menu 119
Standard display menu 116
Submenus 113, 115
TEL* menu 134
Trip computer menu 132
Vehicle submenu 128Convenience submenu 129
Activating easy-entry/exit
feature* 129
Setting key dependency 131
Setting parking position* for
exterior rear view mirror 131
Coolant 238, 336
Adding 239
Anticorrosion/antifreeze
quantity 336
Capacities 329
Checking level 238
Messages in display 266, 267
Temperature 232
Temperature display 108
Warning lamp 267
Coolant level
Checking 234, 238
Cruise control 193, 342
Canceling 194
Driving downhill 194
Driving uphill 194
Fine adjustment 195
Saving current speed 194
Setting speeds 195
Cruise control lever 193

356 Index
Halogen-type
Replacing bulbs 292
Refilling washer fluid 241
Switching off 52
Switching on 47
Washer fluid 338
Headliner
Cleaning 252
Heated seats* 97
Height adjustment
Head restraints 33, 35, 37
Seat belts 43
Steering wheel 37
High beam flasher 47, 104
High beam headlamps
Messages in display 274
Replacing bulbs 290, 292
Switching on 104
High beam headlamps xenon type*
Replacing bulbs 293
High mounted brake lamp 291
Hood 235
Closing 236
Message in display 272
Opening 235
Hydroplaning 227I
Identification labels 318
Certification label 318
Vehicle identification
number (VIN) 318
Ignition 31
Switching on 44
Immobilizer 79
Activating 79
Deactivating 79
Indicator lamps
see Lamps, indicator and warning
Infant and child restraint systems 65
Installing 68
LATCH child seat anchors 69
Information
About service and warranty 10
Button for Tele Aid* 214
Inside rear view mirror
Adjusting 39
Antiglare 144
Installing
Infant and child restraint systems 68
Towing eye bolt 311
Wiper blades 296Instrument cluster 22, 107, 342
Cleaning 252
Coolant temperature display 108
Illumination 107
Lamps in 256–259
Multifunction display 111
Outside temperature indicator 110
Selecting language 124
Instrument lighting 107, 108
Instruments and controls see Cockpit 20
Integrated remote control
Canadian programming 219
Erasing memory 220
Hand-held transmitter 218
Operating 220
Rolling code programming 219
Interior lighting 105
Activating automatic control 105
Deactivating automatic control 105
Delayed shut-off 127
Manual operation 105
Interior storage spaces 203
Armrest 206
Cup holder 204, 205
Glove box 203

357 Index
Parcel net in front passenger
footwell 206
Storage compartment in front of
armrest 205
J
Jack 279
Jump starting 306
K
Key dependency memory
Settings 131
Key positions in starter switch 31
Key, mechanical 285
Key, SmartKey
Battery check lamp 85
Changing the batteries 287
Checking the batteries 86
Factory setting 85
Global locking 85
Global unlocking 85
Loss of 87
Positions in starter switch 31
Remote control 84
Restoring to factory setting 85
Selective setting 85
Starting the engine 44Turning off the engine 53
Unlocking the trunk lid 86
Unlocking with 30
Keys 84
Kickdown 143, 343
Kilometers/miles in speedometer 123
Km/h or mph in speedometer 123
L
Labels, identification 318
Lamp bulbs, exterior 290
Lamps, exterior
Front 290
Light sensor 272
Messages in display 272–275
Rear 291
Lamps, indicator and warning
ABS 257
Airbag Off 61
Battery (SmartKey) 85
Brakes 258
CHECK ENGINE 259
Coolant 266
Engine diagnostics 257, 259
ESP 256
Fuel reserve 259
Instrument cluster 256–259Seat belts 259
Service indicator 247
SRS 57
Turn signals 23
Language
Multifunction display 124
Setting 124
LATCH child seat anchors 69
Folding back 70
Layout of poly-V-belt drive 319
Leather upholstery
Cleaning 253
License plate lamps
Messages in display 274
Replacing bulbs 291, 295
Light alloy wheels
Cleaning 252
Technical data 323
Light sensor 272
Lighter see Cigarette lighter 208
Lighting 101
Automatic headlamp mode 102
Combination switch 104
Daytime running lamp mode 103
Door entry lamps 106