fuses MERCEDES-BENZ CL550 2010 W216 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2010, Model line: CL550, Model: MERCEDES-BENZ CL550 2010 W216Pages: 500, PDF Size: 9.5 MB
Page 11 of 500
Engine oil
Adding ........................................... 371
Additives ........................................ 493
Checking level ............................... 369
Consumption ................................. 369
Messages in the multifunction
display ........................................... 444
Oil dipstick .....................................
369
Recommended engine oils and oil
filter ............................................... 492
ESC (Electronic Stability Control) ......59
ETS/4-ETS ....................................... 60
Messages in the multifunction
display ........................... 429, 430, 435
Warning lamp ................................. 456
ETD (Emergency Tensioning
Device) ................................................. 48
Safety guidelines ............................. 39
ETS/4-ETS (Electronic Traction
System) ................................................ 60
Express operation Power windows .............................. 282
Tilt/sliding sunroof ........................345
Exterior lamp switch ......................... 275
Exterior rear view mirrors ................271
Fold-in function .............................. 273
Parking position ............................. 272
Power folding ................................. 273
Exterior view of vehicle ......................26 F
Fastening the seat belts .....................47
First aid kit .........................................
412
Flat tire
............................................... 465
Lowering the vehicle ......................469
Mounting the spare wheel ............. 466
Preparing the vehicle .....................465
Spare wheel ........................... 465, 490
Floormats ........................................... 363
Fluids
ABC fluid ................................ 371, 491
Automatic transmission fluid ......... 491
Brake fluid ..................................... 491
Capacities ...................................... 490
Engine coolant ............................... 491
Engine oil ....................................... 490Power steering fluid .......................
491
Washer and headlamp cleaning
system ........................................... 492
Fog lamps ........................................... 277
Messages in the multifunction
display
................................... 446, 448
Fold-in function for exterior rear
view mirrors ...................................... 273
Four-wheel drive see All-wheel drive (4MATIC)
Front air bags
see Air bags
Front passenger front air bag ............ 40
Messages in the multifunction
display ........................................... 417
Front passenger front air bag off
indicator lamp ............................. 41, 459
Fuel ..................................................... 366
Additives ........................................ 494
Capacity, fuel tank ......................... 491
Drive sensibly–safe fuel .................397
Fuel consumption statistics ...........204
Fuel filler flap and cap ................... 367
Fuel tank reserve warning lamp .....457
Premium unleaded gasoline ...........493
Refueling ........................................ 366
Requirements ................................ 494
Fuel filler flap ..................................... 367
Fuel gauge ......................................... 301
Fuels, coolants, lubricants etc. ........490
Fuel tank Capacity ........................................ 491
Fuel filler flap and cap ................... 367
Refueling ........................................ 366
Fuses .................................................. 476 G
Garage door opener .......................... 360
Gasoline see Fuel
GAWR (Gross Axle Weight Rating) ...394
Gear range ......................................... 295
Indicator ........................................ 295
Limiting .......................................... 297
Shifting into optimal ......................298
Gear selector lever ............................291
Cleaning ......................................... 409 Index
9 216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1 2009-05-15T11:47:50+02:00 - Seite 9
Page 313 of 500
Stopping
G
Warning!
The braking effect of the DISTRONIC PLUS is
canceled and the vehicle can start to roll if
R the DISTRONIC PLUS is switched off using
the DISTRONIC PLUS lever
R you accelerate
R the DISTRONIC PLUS system or the power
supply is
malfunctioning, e.g. due to battery
failure
R the electrical components in the engine
compartment or the fuses have been
manipulated
R the battery is disconnected G
Warning!
Never get out of the vehicle while the
DISTRONIC PLUS is switched on!
The DISTRONIC
PLUS must never be operated
or switched off by passengers or from outside
the vehicle.
The DISTRONIC PLUS is not a substitute for
the electronic parking brake. It must not be
used to secure the vehicle when parking.
When you get out of the vehicle or switch off
the engine, deactivate the DISTRONIC PLUS
and secure the vehicle from rolling away by
engaging the electronic parking brake.
When the DISTRONIC PLUS detects that the
preceding vehicle is stopping, the vehicle
brakes until it also stops. Once the vehicle is
at a standstill, it remains stationary, without
depressing the brake pedal.
After a short while, the vehicle is secured in
place by the electronic parking brake so that
the operating brake can be relieved of load.
Depending on the following distance set
using the distance setting switch on the
DISTRONIC PLUS lever (Y page 313), the
vehicle will stop adequate away from the
preceding vehicle.
When the DISTRONIC PLUS is activated and
the vehicle is at a standstill, the automatic transmission shifts into park position
P
automatically when
R opening the
driver’s door and releasing the
seat belt
R turning off the engine
R opening the hood
R a system malfunction occurs
R the on-board voltage is insufficient
The DISTRONIC PLUS is deactivated.
Setting the current speed X
Accelerate or decelerate to the desired
speed.
X Briefly lift the DISTRONIC PLUS lever in
direction of arrow : or depress in
direction of arrow ; (Y page 309).
The current speed is set.
X Remove your foot from the accelerator
pedal.
i If you do not take your foot off of the
accelerator pedal and continue to
accelerate past
the set speed, the following
message will appear in the multifunction
display:
DISTRONIC PLUS Override
The distance to a slower moving vehicle in
front of you will not be set. Your vehicle
speed will then be determined only by the
accelerator pedal position.
Changing the set speed G
Warning!
Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
Increase or
decrease the set vehicle speed to
a value that the prevailing road conditions and
legal speed limits permit. Otherwise, sudden
and unexpected acceleration or deceleration
of the vehicle could cause an accident and/
or serious injury to you and others. Driving systems
311
Controls in detail
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1 2009-05-15T11:47:50+02:00 - Seite 311 Z
Page 319 of 500
G
Warning!
The braking effect of the HOLD function is
canceled and the vehicle can start to roll if
R the HOLD function is deactivated by
depressing the accelerator pedal or the
brake pedal
R the HOLD function or the power supply is
malfunctioning, e.g. due to battery failure
R the electrical components in the engine
compartment or the fuses have been
manipulated
R the battery is disconnected G
Warning!
Never get out of the vehicle while the HOLD
function is activated!
The HOLD function must never be operated
or deactivated by passengers or from outside
the vehicle.
The HOLD function does not replace the
electronic parking brake. It must not be used
to secure the vehicle when parking.
Deactivate the HOLD function when leaving
or parking the vehicle. Use the electronic
parking brake to secure the vehicle.
When the HOLD function is activated, the
automatic transmission shifts into park
position P automatically when
R opening the driver’s door and releasing the
seat belt
R turning off the engine
R opening the hood
R a system malfunction occurs
R the on-board voltage is insufficient
The HOLD function is deactivated. AIRMATIC
Introduction The AIRMATIC lets you select the chassis and
suspension setup. The chassis and suspension setup adjusts the damping
behavior and the ride height for your vehicle.
The AIRMATIC consists of two components.
The Adaptive Damping System (ADS)
(Y page 317) and the vehicle level control
(Y page 318).
Adaptive Damping System (ADS)
The Adaptive Damping System (ADS) is
controlled electronically and operates
continuously. It adjusts the damping
characteristics to the current operating and
driving conditions. The damping is adjusted
individually for each wheel. Driving safety and
tire comfort are increased.
The fine tuning of the damping is dependent
on
R your driving style
R road surface conditions
R your personal settings
The selected setting remains stored in
memory even if the SmartKey is removed
from the starter switch. X
Start the engine.
Sporty damping adjustment
The firmer suspension tuning in sport driving
mode provides enhanced road contact.
Select this mode for example, on winding
highways. Driving systems
317Controls in detail
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1 2009-05-15T11:47:50+02:00 - Seite 317 Z
Page 413 of 500
Vehicle equipment ............................
412
Where will I find ...? .......................... 412
Vehicle status messages in the
multifunction display ....................... 414
What to do if … .................................. 450
Unlocking/locking manually ...........460
Replacing SmartKey batteries ......... 461
Replacing bulbs ................................. 463
Replacing wiper blades ....................464
Flat tire .............................................. 465
Battery ............................................... 469
Jump starting .................................... 471
Towing the vehicle ............................473
Fuses .................................................. 476 411Practical hints
216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1 2009-05-15T11:47:50+02:00 - Seite 411
Page 478 of 500
!
Vehicles without 4MATIC:
Because the ESC operates automatically,
the engine and ignition must be shut off
(SmartKey in starter switch position 0 or
1 or KEYLESS-GO start/stop button in
position 0 or 1) when the vehicle is being
towed with one axle raised.
Active braking action through the ESC may
otherwise seriously damage the brake
system which is not covered by the
Mercedes-Benz Limited Warranty.
! Keep in mind that it is important for the
SmartKey to be left in starter switch with
the ignition switched off. As soon as the
SmartKey is removed from the starter
switch the automatic transmission will shift
to park position P. Fuses
Introduction
The electrical fuses in your vehicle serve to
switch off malfunctioning power circuits.
If a fuse is blown, the components and
systems secured by that fuse will stop
operating. G
Warning!
Only use fuses approved by Mercedes-Benz
with the specified amperage for the system in
question and do not attempt to repair or
bridge a blown fuse. Using other than
approved fuses or using repaired or bridged
fuses may cause an overload leading to a fire,
and/or cause damage to electrical
components and/or systems. Have the cause
determined and remedied by an authorized
Mercedes-Benz Center.
! Switch off the vehicle’s internal electrical
functions when you are working on the
fuses.
A blown fuse must be replaced by an
appropriate spare fuse (recognizable by its
color or the fuse rating given on the fuse) of the amperage recommended in the fuse
chart. Any Mercedes-Benz Center will be glad
to advise you on this subject.
i
In case of a blown fuse contact Roadside
Assistance or an authorized Mercedes-
Benz Center.
If a newly inserted fuse blows again, have the
cause determined and rectified by an
authorized Mercedes-Benz Center.
The fuse chart is located in the trunk with the
vehicle tool kit (Y page 412). The fuse chart
explains the fuse allocation and fuse
amperages. Before replacing fuses
X Engage the electronic parking brake.
X Make sure the automatic transmission is in
park position P.
The transmission position indicator in the
multifunction display should be on P.
X Switch off all electrical consumers.
X Turn off the engine. Fuse box in passenger compartment
! Do not use sharp objects such as a
screwdriver to open the fuse box cover in
the dashboard. You could damage the fuse
box cover or the dashboard. Fuse box on driver’s side476
FusesPractical hints
216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1 2009-05-15T11:47:50+02:00 - Seite 476
Page 479 of 500
Fuse box on passenger side
X
Open the respective door.
X Using your hands, pull cover : in direction
of arrow and remove it.
X Closing: Hook fuse box cover : into the
opening at the front.
! The fuse box cover must be properly
positioned as described. Otherwise,
moisture or dirt could enter the fuse box
and possibly impair fuse operation.
Fuse box in the rear passenger
compartment X
Opening: Swing down center armrest.
X Open cover behind center armrest.
X Pull cover : forward in direction of arrow.
X Closing: Press cover : backward and
engage.
! Make sure the seal in the cover is not
damaged during opening or closing. Fuse box in engine compartment
The fuse boxes are located in the engine
compartment on the driver’s and passenger
side.
X Open the hood. Fuse box on driver’s side
X
CL 63 AMG: Remove the control box above
the fuse box.
X Removing cover: Take the crank from the
Operator’s Manual pouch.
X Loosen screws : with crank.
X Remove bracket =.
X Remove fuse box cover ;.
X Installing cover: Attach fuse box
cover ;.
X Attach bracket =.
X Tighten screws : with crank.
! The fuse box cover must be properly
positioned as described. Otherwise,
moisture or dirt could enter the fuse box
and possibly impair fuse operation. Fuses
477Practical hints
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1 2009-05-15T11:47:50+02:00 - Seite 477 Z
Page 480 of 500
Example illustration fuse box on passenger side
X
Removing cover: Press retaining lugs :.
X Remove fuse box cover ;.
X Installing cover: Attach fuse box
cover ;.
X Press fuse box cover ; down.
! The fuse box cover must be properly
positioned as described. Otherwise,
moisture or dirt could enter the fuse box
and possibly impair fuse operation.
X Close the hood after checking or replacing
fuses. Emergency engine shutdown
If the engine cannot be turned off as
described ( Y page 290), you may use the
following emergency procedure.
X Take the fuse chart from the vehicle tool kit
(Y page 412).
X Find row “Emergency engine shutdown” in
the fuse chart table to identify the fuses
that have to be removed as well as their
locations.
X Remove the respective fuses. 478
FusesPractical hints
216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1 2009-05-15T11:47:50+02:00 - Seite 478