check engine MERCEDES-BENZ CLK350 2008 C209 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2008, Model line: CLK350, Model: MERCEDES-BENZ CLK350 2008 C209Pages: 521
Page 8 of 521
Contents
At the gas station .............................. 320
Refueling ...................................... 320
Check regularly
and before a long trip................... 322
Engine compartment ......................... 323
Hood ............................................ 323
Engine oil ..................................... 325
Transmission fluid level ................ 327
Coolant ........................................ 328
Battery ......................................... 329
Windshield washer system and
headlamp cleaning system* ......... 330
Tires and wheels ................................ 331
Important guidelines .................... 331
Tire care and maintenance........... 332
Direction of rotation ..................... 334
Loading the vehicle ...................... 334
Recommended
tire inflation pressure ................... 339
Checking tire inflation pressure ... 341
MOExtended system* .................. 348
Tire labeling.................................. 348
Load identification ....................... 352
DOT,
Tire Identification Number (TIN) ... 353
Maximum tire load ....................... 354Maximum tire inflation pressure ... 355
Uniform Tire Quality Grading
Standards (U.S. vehicles) .............. 356
Tire ply material ............................ 357
Tire and loading terminology......... 358
Rotating tires ................................ 361
Winter driving ..................................... 362
Winter tires ................................... 362
Block heater (Canada only) ........... 363
Snow chains.................................. 363
Maintenance....................................... 364
Maintenance service
indicator message......................... 364
Clearing the maintenance
service indicator message ............ 365
Maintenance
service term exceeded.................. 365
Calling up the maintenance
service indicator display ............... 366
Resetting the maintenance
service indicator ........................... 366
Vehicle care........................................ 367
Cleaning and care of vehicle ......... 367
Practical hints.................................. 377
What to do if …? ................................. 378
Lamps in instrument cluster ......... 378
Lamp in center console ................ 390
Vehicle status messages
in the multifunction display .......... 392
Where will I find...? ............................. 421
First aid kit.................................... 421
Storage compartment
underneath the trunk floor............ 421
TIREFIT (CLK 63 AMG only)........... 422
Vehicle tool kit.............................. 422
Minispare wheel............................ 425
Spare wheel bolts ......................... 426
Unlocking/locking in an emergency .. 427
Unlocking the vehicle ................... 427
Locking the vehicle ....................... 428
Manually unlocking
the gear selector lever .................. 429
Opening/closing
in an emergency (Cabriolet) ............... 430
Operating roll bars manually ......... 430
Soft top emergency operation ...... 432
Page 24 of 521
23 At a glance
Exterior view (Coupe)
ItemPage
1Trunk
Unlocking
Opening and closing
Minispare wheel
Vehicle tool kit
36
110,
112
425
423
2Rear lamps444
3Rear window, defrosting189
4Fuel filler flap
Refueling
Gasoline320
320
492
5Doors
Locking and unlocking
Opening
Locking/unlocking in an
emergency
36, 62,
100
109
427
ItemPage
6Exterior rear view mirror
Adjusting
Auto-dimming rear view
mirrors
47
186
7Tires and wheels
Checking tire inflation pres-
sure
Run Flat Indicator
(Canada only)
Tire Pressure Monitoring
(USA only)
General information
Vehicle tool kit
Minispare wheel
Flat tire331
341
342
344
331
422
425
452
8Towing
Installing towing eye bolt469
470
9Front lamps446
ItemPage
aHood, opening
Engine oil
Coolant
Battery323
325
328
329
bWindshield wipers
Wiper blades, replacing
Wiper blades, cleaning56
450
373
cWindshield
Front window, defrosting
Cleaning with wiper fluid
Cleaning
191,
201
57
373
dPower tilt/sliding sunroof
Opening and closing
Opening and closing in an
emergency
257
430
Page 26 of 521
25 At a glance
Exterior view (Cabriolet)
ItemPage
1Trunk
Unlocking
Opening and closing
TIREFIT Kit (CLK 63 AMG)
Minispare wheel
Vehicle tool kit
103
110, 112
422
425
422
2Rear lamps448
3Rear window, defrosting189
4Fuel filler flap
Refueling
Gasoline320
320
492
5Doors
Locking and unlocking
Locking/unlocking in an
emergency
36, 62,
100
427
ItemPage
6Exterior rear view mirror
Adjusting
Auto-dimming rear view
mirrors
47
186
7Tires and wheels
Checking tire inflation
pressure
Run Flat Indicator
(Canada only)
Tire Pressure Monitoring
(USA only)
General information
TIREFIT Kit (CLK 63 AMG)
Vehicle tool kit
Minispare wheel
Flat tire331
341
342
344
331
452
422
458
452
8Towing
Installing towing eye bolt469
470
9Front lamps446
ItemPage
aHood, opening
Engine oil
Coolant
Battery323
325
328
329
bWindshield wipers
Wiper blades, replacing
Wiper blades, cleaning56
450
373
cWindshield
Front window, defrosting
Cleaning with wiper fluid
Cleaning
191, 201
57
373
dSoft top
Opening and closing
Opening and closing in
an emergency
Roll bars
Cleaning
260
420
82
370
Page 39 of 521
38 Getting started
Unlocking
Starter switch positions
SmartKey
Starter switch
0For removing SmartKey
The steering is locked when the
SmartKey is removed from the starter
switch.
1Power supply for some electrical
consumers, such as seat adjustment
2Ignition (power supply for all electrical
consumers) and driving position
All lamps (except low beam headlamp
indicator lamp, high beam headlamp in-
dicator lamp, and turn signal indicator
lamps unless activated) in the instru-
ment cluster come on. If a lamp in the
instrument cluster fails to come on
when the ignition is switched on, have
it checked and replaced if necessary. If
a lamp in the instrument cluster re-
mains on after starting the engine or
comes on while driving, refer to “Lamps
in instrument cluster” (
page 378).
3Starting position
Warning!G
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from the starter switch, take it with you, and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle. A child’s unsupervised
access to a vehicle could result in an
accident and/or serious personal injury.
iWhen you switch on the ignition, the
indicator and warning lamps (except low beam
headlamp indicator lamp, high beam headlamp
indicator lamp, and turn signal indicator lamps
unless activated) in the instrument cluster come
on. The indicator and warning lamps (except low
beam headlamp indicator lamp, high beam head-
lamp indicator lamp, and turn signal indicator
lamps if activated) will go out when the engine is
running. This indicates that the respective sys-
tems are operational.
iThe SmartKey can only be removed from the
starter switch with the gear selector lever in
positionP.
iIf the SmartKey is left in starter switch
position0 for an extended period of time, it can
no longer be turned in the switch. In this case,
the steering is locked. To unlock, remove
SmartKey from starter switch and reinsert.
Page 40 of 521
39 Getting started
Unlocking
For more information, see “SmartKey”
(
page 100).
For information on starting the engine us-
ing the SmartKey, see “Starting with the
SmartKey” (
page 52).SmartKey with KEYLESS-GO*
Pressing the KEYLESS-GO start/stop but-
ton on the gear selector lever corresponds
to turning the SmartKey to the various
starter positions.
If you firmly depress the brake pedal dur-
ing pressing the KEYLESS-GO start/stop
button, the engine starts automatically.
You can also use the SmartKey with
KEYLESS-GO like a normal SmartKey.
KEYLESS-GO start/stop button
1USA only
2Canada only
The SmartKey with KEYLESS-GO must be
located in the vehicle.
Make sure the gear selector lever is set
toP.
Do not depress the brake pedal.
!If the SmartKey cannot be turned in the
starter switch, the battery may not be sufficient-
ly charged.
Check the battery and charge it if necessary
(
page 464).
Get a jump start (page 467).
To prevent accelerated battery discharge or a
completely discharged battery, always remove
the SmartKey from the starter switch when the
engine is not in operation.
iThe function of the SmartKey overrules the
KEYLESS-GO function.
Page 41 of 521
40 Getting started
Unlocking
Position 0
Before you press the KEYLESS-GO
start/stop button, the vehicle’s on-board
electronics have status0 (as with
SmartKey removed).
Position 1
Press the KEYLESS-GO start/stop
button once.
This supplies power for some electrical
consumers, such as seat adjustment.Ignition (or position 2)
Press the KEYLESS-GO start/stop but-
ton twice.
This supplies power for all electrical
consumers. All the lamps (except low
beam headlamp indicator lamp, high
beam headlamp indicator lamp, and
turn signal indicator lamps unless acti-
vated) in the instrument cluster come
on. If a lamp in the instrument cluster
fails to come on when the ignition is
switched on, have it checked and re-
placed if necessary. If a lamp in the in-
strument cluster remains on after
starting the engine or comes on while
driving, refer to “Lamps in instrument
cluster” (
page 378).For more information, see “SmartKey with
KEYLESS-GO*” (
page 103).
For information on starting the engine
using the KEYLESS-GO start/stop button,
see “Starting with KEYLESS-GO*”
(
page 52).
iIf you now press the KEYLESS-GO
start/stop button
once again, the ignition (position2) is
switched on.
twice, the power supply is again switched
off.
iIf you now press the KEYLESS-GO
start/stop button once, the power supply is
again switched off.
iWhen you switch on the ignition, the indica-
tor and warning lamps (except low beam head-
lamp indicator lamp, high beam headlamp
indicator lamp, and turn signal indicator lamps
unless activated) in the instrument cluster come
on. The indicator and warning lamps (except low
beam headlamp indicator lamp, high beam head-
lamp indicator lamp, and turn signal indicator
lamps if activated) will go out when the engine is
running. This indicates that the respective sys-
tems are operational.
Page 59 of 521
58 Getting started
Driving
Problems while driving
The engine runs erratically and misfires
An ignition cable may be damaged.
The engine electronics may not be op-
erating properly.
Unburned gasoline may have entered
the catalytic converter and damaged it.
Give very little gas.
Have the problem repaired at an autho-
rized Mercedes-Benz Center as soon as
possible.
The coolant temperature is
above 248°F (120°C)
The coolant is too hot and is no longer
cooling the engine.
Stop the vehicle in a safe location as
soon as possible and turn off the
engine. Allow engine and coolant to
cool off.
Check the coolant level and add
coolant if necessary (
page 328).
In case of accident
If the vehicle is leaking gasoline:
Do not start the engine under any
circumstances.
Notify local fire and/or police
authorities.
If the extent of the damage cannot be
determined:
Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.
If no damage can be determined on the
major assemblies
fuel system
engine mount:
Start the engine in the usual manner.
!If anything blocks the windshield wipers
(leaves, snow, etc.), switch them off
immediately.
For safety reasons, stop the vehicle in a safe
location and,
remove SmartKey from starter switch
or
turn off the engine by pressing the
KEYLESS-GO* start/stop button and
open the driver’s door (with the driver’s
door open, starter switch is in position 0,
same as with SmartKey removed from
starter switch)
before attempting to remove any blockage.
Remove blockage.
Turn the windshield wipers on again.
If the windshield wipers fail to function at all with
the combination switch in positionI,
set the combination switch to the next high-
er wiper speed
have the windshield wipers checked at the
nearest authorized Mercedes-Benz Center.
Page 83 of 521
82 Safety and Security
Occupant safety
Roll bars (CLK cabriolet)
The roll bars are integrated into the rear
head restraints.
The roll bars raise automatically in an acci-
dent or in a critical driving situation.You can manually lower the roll bars again
when the soft top is open (
page 431).
With the soft top closed, contact an autho-
rized Mercedes-Benz Center to have the
roll bars lowered. Do not attempt to lower
the roll bars manually with the soft top
closed. Lowering the roll bars manually
with the soft top closed may impair the
function of the roll bars.
Warning!G
Make sure nothing is blocking the roll bars’
path of motion. Otherwise someone could
be injured when the roll bars are raised. The
head restraints should therefore always be
in the raised position when the rear seat is
occupied (
page 123).
iWhen the roll bars are raised automatically,
you will hear a ratcheting sound and the rear
head restraints will also rise.
iYou cannot lower the rear head restraints
with the rear head restraint lowering switch
(
page 123) when the roll bars are in the raised
position.
Also, you cannot operate the soft top using the
soft top switch when the roll bars are in the
raised position.
If the soft top is open, you can manually low-
er the roll bars (
page 431).
If the soft top is closed, contact an autho-
rized Mercedes-Benz Center to have the roll
bars lowered.
Warning!G
If the yellow roll bar warning lamp in
the clock does not go out after starting the
engine, or if it comes on while driving, then
the roll bar system is not operating properly
and may not activate in an accident. In this
case, raise the roll bars manually before
continuing to drive (
page 430).
For safety reasons, drive only with the roll
bars raised until the malfunction is repaired.
Have your vehicle checked at an authorized
Mercedes-Benz Center.
Page 106 of 521
105 Controls in detail
Locking and unlocking
Important notes on using KEYLESS-GO*
You can also use the SmartKey with
KEYLESS-GO like a normal SmartKey
(
page 100).
You can combine KEYLESS-GO func-
tions with normal SmartKey functions
(e.g. unlocking with KEYLESS-GO and
locking with the‹button).
Always carry the SmartKey with
KEYLESS-GO with you.
Never store the SmartKey with
KEYLESS-GO together with:
Electronic items such as a cellular
phone or another SmartKey with
KEYLESS-GO.
Metallic objects such as coins or
metal foil.
Doing so could impair the function of
the KEYLESS-GO system.
To lock or unlock the vehicle, the
SmartKey with KEYLESS-GO must be
located outside the vehicle within ap-
proximately 3 ft (1 m) of the door to be
opened or the trunk lid.
In order to start the engine with the
SmartKey with KEYLESS-GO:
The SmartKey with KEYLESS-GO
must be located in the vehicle.
All doors must be closed.
The brake pedal must be firmly de-
pressed. Do not depress the accel-
erator.
If the SmartKey with KEYLESS-GO is
positioned farther away from the vehi-
cle, the system may no longer recog-
nize the SmartKey with KEYLESS-GO.
The vehicle then cannot be locked or
the engine started via the KEYLESS-GO
system.
If the SmartKey with KEYLESS-GO is re-
moved from the vehicle (e.g. if passen-
ger exits the vehicle with the SmartKey
with KEYLESS-GO).
iYou can also open and close the windows
(
page 250) and the tilt/sliding sunroof*
(
page 257) or the soft top (page 263) using
the SmartKey with KEYLESS-GO.
!If you can no longer lock or unlock the vehi-
cle with the SmartKey with KEYLESS-GO, then
the batteries in the SmartKey with KEYLESS-GO
are discharged, the SmartKey with KEYLESS-GO
is malfunctioning or the vehicle battery is
drained.
Check the batteries in the SmartKey with
KEYLESS-GO (
page 108) and replace
them if necessary (
page 441).
Use the mechanical key to unlock the driv-
er’s door (
page 427) and the trunk
(
page 428).
Use the mechanical key to lock the driver’s
door (
page 428) and the trunk
(
page 118).
Have the vehicle battery and the battery con-
nections checked (
page 464).
If the SmartKey with KEYLESS-GO is malfunc-
tioning, contact an authorized Mercedes-Benz
Center.
Page 185 of 521
184 Controls in detail
Automatic transmission
Shift to the next higher gear.
The fuel supply will otherwise be inter-
rupted to prevent the engine from over-
revving.
Downshifting
Briefly press the gear selector lever to
the left in theD-direction.
or
Briefly pull left shift paddle1
(
page 181).
The transmission shifts to the next
lower gear.Kickdown
Using the kickdown when driving in the
manual program modeM is not possible.
Deactivating manual shift program
Press the program mode selector
switch (
page 182) repeatedly
until
CorS appears in the multifunction
display.
or
Restart the engine.
The transmission will go to the
automatic program mode (C orS).
The manual program modeM is not
stored.Emergency operation
(Limp-Home Mode)
If vehicle acceleration becomes less re-
sponsive or sluggish or the transmission
no longer shifts, the transmission is most
likely operating in limp-home (emergency
operation) mode. In this mode only second
gear and reverse gear can be selected.
Stop the vehicle in a safe location.
Move the gear selector lever to park
positionP.
Turn off the engine.
Wait at least 10 seconds before
restarting.
Restart the engine.
Move the gear selector lever to
positionD (for second gear) or
positionR.
Have the transmission checked at an
authorized Mercedes-Benz Center as
soon as possible.
Warning!G
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced
vehicle control. Your vehicle’s ABS will not
prevent this type of loss of control.
iWhen you brake or stop, the transmission
shifts down to a gear from which you can easily
accelerate or take off.