open hood MERCEDES-BENZ CLK500 COUPE 2003 C209 User Guide

319 Practical hints
Replacing bulbs
Low beam and high beam bulb
Switch off the lights.

Open the hood (
page 253).

Turn housing cover1 or 2 counter-
clockwise and remove.

Turn bulb holder 4 or 5 with the bulb
counterclockwise and remove.

Press the bulb backwards and turn
counterclockwise out of the bulb hold-
er.

Press the new bulb into the holder and
twist it clockwise.

Place the bulb holder back into the
lamp and turn it clockwise.

Place the corresponding housing cov-
ers back on and turn them clockwise.Front turn signal lamp bulb

Switch off the lights.

Open the hood (
page 253).

Twist bulb socket3 counterclockwise
and pull out.

Push bulb into socket, turn counter-
clockwise and remove.

Insert new bulb in socket, push in and
twist clockwise.

Reinsert bulb socket in lamp and twist
clockwise.Parking and standing lamp bulb

Switch off the lights.

Open the hood (
page 253).

Turn housing cover2 counterclockwise
and remove.

Pull out the bulb socket with the bulb.

Pull the bulb out of the bulb socket.

Insert a new bulb in the socket.

Reinstall the bulb socket.

Align housing cover and click into
place.

320 Practical hintsReplacing bulbsFront lamps Bi-Xenon*-type
1Bulb socket for turn signal lamp
2Housing cover for high beam lamp
3Housing cover for Bi-Xenon* lamp4High beam bulb
5Parking and standing lampHigh beam bulb

Switch off the lights.

Open the hood (
page 253).

Turn housing cover2 counterclockwise
and remove.

Turn bulb holder 4 with the bulb coun-
terclockwise and remove.

Press the bulb backwards and turn
counterclockwise out of the bulb hold-
er.

Press the new bulb into the holder and
twist it clockwise.

Place the bulb holder back into the
lamp and turn it clockwise.

Place the housing cover 2 back on and
turn them clockwise.
Warning!
G
Do not remove the cover 3 for the Bi-Xenon*
headlamp. Because of high voltage in xenon
lamps, it is dangerous to replace the bulb or
repair the lamp and its components. We rec-
o mme nd t h at y ou ha ve s uc h w o rk do n e by a
qualified technician.

321 Practical hints
Replacing bulbs
Front turn signal lamp bulb
Switch off the lights.

Open the hood (
page 253).

Twist bulb socket1 counterclockwise
and pull out.

Push bulb into socket, turn counter-
clockwise and remove.

Insert new bulb in socket, push in and
twist clockwise.

Reinsert bulb socket in lamp and twist
clockwise.Parking and standing lamp bulb

Switch off the lights.

Open the hood (
page 253).

Turn housing cover2 counterclockwise
and remove.

Pull out the bulb socket with the bulb.

Pull the bulb out of the bulb socket.

Insert a new bulb in the socket.

Reinstall the bulb socket.

Align housing cover and click into
place.
Side marker lamp bulb
Switch off the lights.

Carefully slide lamp towards rear.

Remove front end first.

Twist bulb socket counterclockwise
and pull out.

Pull bulb out of the bulb socket.

Insert new bulb in socket.

Reinstall bulb socket, push in and twist
clockwise.

To reinstall lamp, set rear end in
bumper and let front end snap into
place.

323 Practical hints
Replacing wiper blades
Replacing wiper blades
Removing
Fold the wiper arm forward.
1Lock
2Unlock

Pull the tab in the direction of arrow2
and remove windshield wiper.
Installing
Slide the wiper blade into the cutout on
the wiper arm.

Slide the tab back in the direction of
arrow1 until it audibly engages.

Fold the wiper arm backward to rest on
the windshield.
Warning!
G
For safety reasons, remove key from starter
switch before replacing a wiper blade, other-
wise the motor could suddenly turn on and
cause injury.
!Never open the hood when the wiper
arm is folded forward.
Do not allow the wiper arms to contact
the windshield glass without a wiper
blade inserted.
Make certain that the wiper blades are
properly installed. Improperly installed
wiper blades may cause windshield
damage.
For your convenience, we recommend
that you have this work carried out by
an authorized Mercedes-Benz Center.

330 Practical hintsBattery1Negative terminal
2Cover over positive terminal
Disconnecting the battery
Turn off all electrical consumers.

Open the hood (
page 253).

Remove the filter box.

Disconnect battery negative lead1.

Remove cover 2 from the positive ter-
minal.

Disconnect the battery positive lead.
Removing the batteries
Remove the screw securing the bat-
tery.

Remove the battery support and brack-
et. Take out the battery.
Charging and reinstalling batteries
Charge battery in accordance with the
instructions of the battery charger
manufacturer.

Reinstall the charged battery. Follow
the previously described steps in re-
verse order.
Warning!
G
With a disconnected battery

y o u w i l l n o l o n g e r b e a b l e t o t u r n t h e k e y
in the starter switch and pressing the
KEYLESS-GO* start/stop button (if so
equipped) on the selector lever will have
no effect


the selector lever will remain locked in
positionP
Warning!
G
Never charge a battery while still installed in
the vehicle. Gases may escape during charg-
ing and cause explosions that may result in
paint damage, corrosion or personal injury.

377 Index
GPS 363
GPS see COMAND* 233
H
Hand-held transmitter
Programming integrated remote con-
trol 236
Hands-free microphone 27
Hard plastic trim items
Cleaning 273
Hazard warning flasher 108
Switching off 108
Switching on 108
Head restraints 97
Headlamp cleaning system* 259
Headlamps
Automatic control 106
Bi-Xenon 361
Cleaning 271
Cleaning system* 151, 259
Refilling washer fluid 259
Switching off 51
Switching on 46
Washer fluid 357
Washer system* 357
Headliner
Cleaning 273Heated seats* 101
Height adjustment
Head restraints 36
Steering wheel 37
High beam flasher 47, 108
High beam headlamps
Messages in display 298
Replacing bulbs 317, 319
Switching on 108
High mounted brake lamp 317
Hood 253
Closing 254
Message in display 296
Opening 253
Hydroplaning 245
I
Identification labels 342
Ignition 31, 33
Switching on 44
Immobilizer 79
Activating 79
Deactivating 79
Indicator lamps see Lamps, indicator and
warningInfant and child restraint systems 66
Installing 70
LATCH child seat mounts 71
Information
About service and warranty 10
Button for Tele Aid* 232
Inside rear view mirror
Adjusting 38
Antiglare 149
Installing
Infant and child restraint systems 70
Towing eye bolt 336
Wiper blades 323
Instrument cluster 22, 111, 363
Cleaning 273
Coolant temperature display 112
Illumination 111
Lamps in 276–280
Multifunction display 114
Outside temperature indicator 113
Selecting language 127
Instruments and controls see Cockpit 20

382 IndexOne-touch gearshifting 142
Canceling gear range limit 142
Downshifting 142
Upshifting 142
Opening
Ashtray 223
Cup holder 220, 221
Doors from the inside 92
Fuel filler flap 251
Fuel filler flap manually 313
Glove box 219
Hood 253
Side windows 187, 188
Sliding/pop-up roof 190, 314
Sliding/pop-up roof in an emergency
314
Sliding/pop-up roof with SmartKey
191
Trunk 87
Trunk from the inside 92
Windows 187
Windows with SmartKey 188Operating
Audio system 165
Cassette player 121
CD player 120
COMAND* see separate operating in-
structions
Garage door opener 238
Integrated remote control 238
Navigation system 121
Radio 120
Radio transmitters 248
Safety 16
Telephone 165
Telephone* 138, 182
Vehicle outside the USA and Canada
13
Operating safety 16
Audio system 165
Operator’s Manual 10
Ornamental moldings 271
Outside temperature indicator 113
Overdue service 266
Overhead control panel 27
Overspeed range 364P
Paintwork 270
Panic alarm 73
Panic button on SmartKey 73
Parcel net in front passenger footwell 222
Parking 50, 243
Parking brake 45, 50
Engaging 50
Message in display 299
Releasing 45
Parking lamps
Replacing bulbs 317, 319, 321
Switching on 105
Parking position
Exterior rear view mirrors 103, 135,
150
Parktronic* 364
Sensor 272
Parts see Spare parts service 340