service indicator MERCEDES-BENZ E-CLASS COUPE 2022 Owners Manual

9
Centre display area of the inst rument display
(e xamp le: standard display for a trip): assis-
ta nce/telephone/navigation/trip/media/
ra dio/styles and displa ys/service/possible
settings for head-up display
A Fuel le vel and fuel /ller 0ap location indicator Ov
Ov
er
ervie
vie w of butt
w of butt ons on t
ons on the st
he steer
eering wheel
ing wheel
Depending on the equipment, the la yout and the
design of the control elements on the steering
wheel may di.er. 1
Control panel for cruise control/limiter or
Ac tive Distance Assist DISTRONIC
(/ page 198)
2 G Back button, on-boa rdcomputer
3 Touch Control, on-board computer
To navigate: swipe
To con/rm: press a
4 ò Main menu, on-board computer 5
ò Home screen, MBUX multimedia system
6 Touch Control, MBUX multimedia system
To navigate: swipe
To con/rm: press a
7 G Back button, MBUX multimedia system
8 Cont rol panel forth e MBUX multimedia sys-
tem
£ LINGU ATRO NIC
9 Toadjust the brightness of the inst rument
lighting Oper Oper
ating t
ating t he on-boar
he on-boar d com
d com put
puter
er
Obser vethe legal requ irements forth e country in
which you are cur rently driving when ope rating
th e on-board computer. Instrument display and on-board computer
253
253

The
following entries can be made, forex ample:
R Town, st reet, house number
R Street,to wn
R Postcode
R POI name or POI ca tegor y,e.g. Parking
R Contact name #
Select a sear chresult in list 3. #
Calculate thero ute (/ page 276).
% You can /nd fur ther information about desti-
nation entr y,e.g. thre e-word addresses, in the
Digital Owner's Manual.
Changing country
Changing country #
Select the country indicator in 1.#
Enter the country indicator. #
Select the country in 3.
Using online sear ch
Using online sear ch
% Requirements: the media display sho wsan
Internet connection in the status line with the
Q symbol. Destination ent
ryuses online map services. If the
on-board sear ch/nds no sui table destinations or
if yo uch ange countries, the online sear chisavail-
able.
Fo rth e destination you can enter an address, a
POI or a thre e-word address. #
Enter the destination in input line 2.
The sear chresults are displa yed. #
Select the destination in the list.
The de tailed view forth ero ute is displa yed.
or #
Select country indicator 1. #
Select the pr ovider forth e online service from
th e countries list. #
Enter the destination in input line 2. #
Select the destination in the list. Calculating a r Calculating a r
out
oute and using se
e and using se ttings f
ttings for r
or route
oute
guidance
guidance R
R
eq
eq uir
uir ements:
ements:
R The destination has been entered.
R The destination address is shown. Multimedia system:
4 © 5
Navigation 1
¥ Noroute yet.
¦ Aro ute has been mapped. #
Select ¥.
The route tothe destination is calculated.
Ro ute guidance begins.
or #
Select ¦. #
Select Set as intermediate dest..
The destination address is set as the next
intermediate destination. 276
276
MBUX multimedia system

This will contact
youto con/rm the appoint-
ment and if necessary consult about the
de tails.
% Ifyo u select LateraTerthe service message
appears, the message is hidden and reap-
pears at a later time.
Giving consent t
Giving consent t o dat
o data tr
a transf
ansf er dur
er dur ing a Mer
ing a Mer cedes
cedes
me call
me call
R R eq
eq uir
uir ements:
ements:
R There is an active Mercedes me call via the
multimedia system or the me button in the
ove rhead control panel (/ page 284).
% The prom pttocon/rm data transfer does not
appear in all count ries.
If th eAc cident/B reakdown Management and
Main tenance Mana gement services are not acti-
va ted on Mercedes me, theDo you want to trans-
mit vehicle data and the vehicle's position to
the Mercedes-Benz Customer Centre in order to
improve the processing of your request? mes-
sage is shown. #
Select Yes.
Re leva nt identi/cation data is transmitted
automaticall y.
More information on Mercedes me: https://
ww w.mercedes.me
T
T r
ransf
ansf err
erred dat
ed dat a dur
a during a Mer
ing a Mer cedes me call
cedes me call
When you make a service call via Mercedes me,
data is transmitted. This enables targ eted advice
and a smoo thservice.
The following requ irements must be ful/lled for
th e transfer of the data:
R The vehicle is switched on.
R The required da tatransfer tech nology is sup-
por tedby the mobile phone network pr ovider.
R The quality of the mobile connection is su1-
cient.
Multi-s tage transfer depends on thefo llowing fac-
to rs:
R Reason forth e initiation of the call
R The available mobile phone transmission tech-
nology.
R The activated Mercedes me connect services. R
The service selected in thevo ice control sys-
te m.
% A prom ptfor consent tothe data transfer only
occurs if the cor responding Mercedes me
connect service is not activated.
Dat
Dat a tr
a transf
ansf er if Mer
er if Mer cedes me connect ser
cedes me connect ser vices
vices
ar
ar e no
e no t activ
t activ at
ated
ed
If no Mercedes me connect services are activated
and the data pr otection prom pthas been con-
/rmed thefo llowing data is transmitted:
R Vehicle identi/cation number
R Time of the call
R Reason forth e initiation of the call
R Con/ rmation of the data pr otection prompt
R Country indicator of theve hicle
R Set language forth e multimedia system
R Telephone number of the communication plat-
fo rm installed in theve hicle MBUX multimedia system
287 287

If a call is made
for a service appointment via the
service reminder, thefo llowing data is also trans-
mitted:
R Current mileage and maintenance data
If a call is made aTer automatic accident or break-
down de tection using the multimedia system, the
fo llowing data is also transmitted:
R Current mileage and maintenance data
R Current vehicle location
If Ac cident and Breakdown Management is called
via thevo ice control system and no service has
been activated, but the data pr otection query has
been con/ rmed, thefo llowing data can also be
called up from theve hicle bythe Mercedes-Benz
Customer Centre:
R Current vehicle location
If th e data pr otection prom pthas been rejec ted,
th efo llowing data is transmitted toenable targe-
te d advice and an e1cient service:
R Reason forth e initiation of the call
R Rejection of the data pr otection prom pt
R Country indicator of theve hicle R
Set language forth e multimedia system
R Telephone number of the communication plat-
fo rm installed in theve hicle
Dat
Dat a tr
a transf
ansf er if Mer
er if Mer cedes me connect ser
cedes me connect ser vices
vices
ar
ar e activ
e activ at
ated
ed
Only if there specti veservice is activated will
additional incident-speci/c data be transmit ted in
th e second stage toenable an optimal service.
An overview of the data transmitted can be found
in there specti veterm s of use for Mercedes me
connect services. These can be obtained in the
Mercedes me por tal: https://
me.secure.mercedes-benz.com
Dat
Dat a pr a pr ocessing
ocessing
The data transmitted within the scope of the call
is dele ted from the processing system aTer the
call is /nished, in so far as this data is not being
used forot her activated Mercedes me connect
services.
The incident-speci/c data is processed and stored
in the Mercedes-Benz Customer Centre and, if
re qu ired toprocess the incident, forw arded tothe
service partner authorised bythe Mercedes-Benz
Customer Centre. Please take note of the data pr
otection information on the Mercedes me Inter-
net page https://www.mercedes.me or in the
re corded message immediately aTer calling the
Mercedes-Benz Customer Centre.
% The recorded message is not available in
ev ery countr y. Mer
Mer
cedes me connect
cedes me connect Inf
Inf
or
ormation on Mer
mation on Mer cedes me connect
cedes me connect
% Mercedes me connect or individual Mercedes
me connect services are not available in every
countr y.Find out at a Mercedes-Benz service
centre if these functions are available in your
countr y.
Mercedes me connect consists of multiple ser v-
ices.
Yo u can use thefo llowing services via the multi-
media system and theove rhead control panel, for
ex ample:
R Accident and Breakdown Management (me
button or situation-dependent display in the
multimedia system) 288 288
MBUX multimedia system

#
During starting assistance, alw aysta ke
care toconnect only battery term inals of
identical polarity. #
During starting assistance, obser vethe
sequence described for connecting and
disconnecting the jump leads. #
Do not connect or disconnect the bat-
te ry term inals with the engine running. &
W
WARNI NG
ARNI NGRisk of explosion due toexplo-
sive mixture of gases
An explosive mixture of gases can escape
from the battery during charging and starting
assis tance. #
Fire , naked 0ames, smoking and creating
spar ksmust be avoided. #
Make sure there is adequate ventilation. #
Do not stand overth e batter y. &
W
WARNI NG
ARNI NGRisk of explosion from a frozen
battery
A dischar ged battery may freeze at temp era-
tures slightly abo veor below freezing point.
During starting assistance or battery charging,
battery gas can be released. #
Always allow a battery tothaw before
ch arging it or per form ing starting assis-
ta nce. If
th e indicator/warning lamps in the instrument
cluster do not light up at low temp eratures, it is
ve ry likely that the dischar ged battery has frozen.
In this case you may neither jump-start theve hi-
cle nor charge the batter y.
The service life of a bat tery that has been thawed
may be dramatically shor tened. The starting char-
acteristics may be impaired, especially at low
te mp eratures.
It is recommended that you ha veath awe d battery
ch ecked at a quali/ed specialist workshop. All v
All v ehicles
ehicles
* NO
NOTE
TEDamage caused bynume rous or
ex tended attem ptsto start the engine Numerous or
extended attem ptsto start the
engine may damage the catalytic con verter
due tonon-combusted fuel. #
Avoid numerous and extended attem pts
to start the engine. Obser
vethefo llowing points during starting assis-
ta nce and when charging the batter y:
R Only use undamaged jump lead/charging
cables with a su1cient cross-section and
insulated term inal clamps.
R Non-insulated parts of thete rm inal clamps
must not come into contact with other me tal
parts while the jump lead/charging cable is
connected tothe battery/jump-start connec-
tion point.
R The jump lead/charging cable must not come
into contact with any parts which may mo ve
when the engine is running. 330 330
Breakdown assistance

The tyre pressure loss
warning system is only an
aid. It is the driver's responsibility toset the tyre
pressure tothere commended cold tyre pressure
suitable forth e operating situation and tocheck
it.
Be sure toalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 342)
R Displ aymessages about the tyres
(/ page 423)
R
R est est ar
arting t
ting t he tyr
he tyr e pr
e pressur
essur e loss w
e loss w ar
arning syst
ning syst em
em
R
R eq
eq uir
uir ements:
ements:
R The recommended tyre pressure is cor rectly
set forth ere specti veoperating status on all
wheels.
Re start the tyre pressure loss warning system in
th efo llowing situations:
R The tyre pressure has changed.
R The wheels or tyres ha vebeen changed or
ne wly /tted. On-board computer:
4 Service 5
Tyres #
Swipe down wards on Touch Control on the
leT-hand side of the steering wheel.
The Run Flat Indicator active Restart mes-
sage is shown in the displa y. #
Tobegin restart, press Touch Control on the
leT-hand side of the steering wheel.
The Tyre pressure now OK? message is
shown in the displa y. #
Select Yes. #
Tocon/rm restart, press Touch Control on the
leT-hand side of the steering wheel.
The Run Flat Indicator restarted message is
shown in the displa y.
ATer you ha vedriven for a few minutes, the
tyre pressure loss warning system monitors
th e set tyre pressures of all the tyres.
Be sure toalso pay attention tothefo llowing rela-
te dto pic:
R Notes on tyre pressure (/ page 342) Wheel c
Wheel c
hange
hange N
No
ot
tes on selecting,
es on selecting, /tting
/ttingand r
and replacing tyr
eplacing tyr es
es *
N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. &
W
WARNING
ARNING Risk of accident due toincor-
re ct wheel and tyre dimensions
If wheels and tyres of the wrong size are /t ted,
th e service brakes or components in the brake
system and in the wheel suspension may be
damaged. #
Alwaysre place wheels and tyres with
th ose that ful/l the speci/cations of the
original part.
Fo r wheels, pay attention tothefo llowing:
R Designation
R Type 346
346
Wheels and tyres

Displa
Displa
y messag
y messag es
es Intr
Intr
oduction
oduction Inf
Inf
or
ormation about displa
mation about displa y messag
y messages
es
Display messages appear on the inst rument dis-
pla y.
Display messages with graphic symbols are sim-
pli/ed in the Owner's Manual and may di.er from
th e symbols on the inst rument displa y.The instru-
ment display sh ows high-priority display messages
in red. Cer tain display message s are accompa-
nied byawa rning tone.
Please act in accordance with the display mes-
sages and follow the additional no tes in the Own-
er's Manual.
Fo r some display messages, symbols will also be
shown:
R Õ Further information
R ¨ Hide displ aymessage
Wi th th e leT-hand Touch Control, you can select
th ere specti vesymbol byswiping tothe leT or
ri ght. Pressing Õdispla ysfur ther information on th
e media displa y.Press the¨ symbol tohide
th e display message.
Yo u can hide lo w-priority display messages by
pressing the back button Gorthe leT-hand
To uch Control. The display message s willthen be
stored in the message memor y.
Re ctify the cause of a display message as quickly
as possible.
High-priority display message s cannotbe hidden.
The instrument display will show these display
messages permanently until the cause of the dis-
play message has been recti/ed.
Calling up sav
Calling up sav ed displa ed display messag
y messag es
es
On-board computer:
4 Service 5
1 message
If th ere are no display messages, No messages
will appear on the inst rument displa y. #
Scroll thro ugh the display messages byswip-
ing upwards or down wards on the leT-hand
To uch Control. #
T
To e
o e xit t
xit t he messag
he messag e memory
e memory:
:press the back
button G. Display messages and
warning/indicator lamps
375
375

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
ÿ
Coolant Stop vehicle
Switch engine off *T
he coolant is too hot. #
Stop immediately in accordance with the tra1c conditions and switch o. theve hicle. &
W WARNING
ARNING Risk of burns when opening the bonnet
If yo u open the bonnet in theev ent of an overheated engine or /re in the engine compartment, thefo llowing situa-
tions may occur:
R You may come into contact with hot gases.
R You may come into contact with other escaping hot operating 0uids. #
Before opening the bonnet, allow the engine tocool down. #
Intheev ent of a /re in the engine compartment, keep the bonnet closed and call the /re service. #
Wait until the engine has cooled down. #
Make sure that the air supply tothera diator is not obstructed. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C.
ÿ *T
here is a malfunction in the engine cooling system. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C. 392
392
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
#
Stop vehicle Leave engine
running *T
he 12 V battery charge leve l is too lo w. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Leavethe engine running. #
Ifth e display message disappears: drive on. #
Ifth e display message does not disappear: consult a quali/ed specialist workshop.
Û Battery overheated Stop,
everybody out! Outdoors if
possible *T
he 48 V battery is overheating. There is a risk of /re. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
If possible, stop theve hicle in the open air and ensure that all vehicle occupants getout.
% Supporting vehicle functions may activate automaticall y,e.g. the air-recirculation mode as part of climate control. #
Do not continue driving. #
If smoke is present, lea vethe danger zone and call the /re service immediatel y. #
Consult a quali/ed specialist workshop even if there are no extern al signs of a /re.
Û
48 V battery See Owner's
Manual *T
he 48 V on-board elect rical system has function restrictions.
Comfort functions ma y berestric ted. #
Consult a quali/ed specialist workshop immediatel y. Display messages and
warning/indicator lamps
421 421

W
W
ar
ar ning/indicat
ning/indicat or lampP
or lam pP ossible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
R The engine coolant pump is faulty
If th ere is an additional warning tone, the coolant temp erature has exceeded 120°C. &
W
WARNING
ARNING Risk of burns when opening the bonnet
If yo u open the bonnet in theeve nt of an overheated engine or /re in the engine compartment, thefo llowing situa-
tions may occur:
R You may come into contact with hot gases.
R You may come into contact with other escaping hot operating 0uids. #
Before opening the bonnet, allow the engine tocool down. #
Intheev ent of a /re in the engine compartment, keep the bonnet closed and call the /re service. #
Stop immediately in accordance with the tra1c conditions and switch o. theve hicle. Do not continue driving. #
Notethe messages on the instrument displa y.
If t If t he coolant t
he coolant t em
em per
per atur
atur e displa
e displa y is at t
y is at the low
he lower end of t
er end of t he t
he tem
emper
per atur
atur e scale:
e scale: #
Consult a quali/ed specialist workshop.
If t
If t he coolant t he coolant t em
emper
per atur
atur e displa
e displa y is at t
y is at the upper end of t
he upper end of t he t
he tem
emper
per atur
atur e scale:
e scale: #
Exit theve hicle and keep a safe distance from it until the engine has cooled down. #
Check the coolant le vel (/ page 310). Display message
s andwarning/indicator lamps
437
437