engine MERCEDES-BENZ GLC COUPE 2022 Manual Online

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Û
Malfunction *T
he drive system is malfunctioning. A warning tone will also sound. #
Consult a quali/ed speciali stwo rkshop.
*T here is a serious malfunction if the display message and warning tone are repeated at short inter vals. You must stop
th eve hicle immediately in accordance with the tra1c conditions because the drive system is automatically deactiva-
te d. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Switch o. theve hicle and consult a quali/ed specialist workshop.
Û
Malfunction Visit workshop *T
he drive system is malfunctioning. #
Consult a quali/ed specialist workshop.
Without changing gear,
consult workshop *T
he drive system cann otbe restar ted due toa malfunction.
If th e transmission position is changed using the DIRECT SELECT le ver,th e drive system will be switched o. in park
position jor neutral i. #
Consult a quali/ed specialist workshop and do not change the transmission position.
Without starting engine
again, consult workshop *I
t is not possible torestart the drive system due toa malfunction. #
Do not switch o. the drive system; drive on tothe nearest quali/ed specialist workshop. 420 420
Displ
aymessages and warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
d
Malfunction *T
he drive system is malfunctioning. The output of your vehicle is restric ted. #
Consult a quali/ed specialist workshop.
d
Stop Switch engine off *T
he drive system is malfunctioning. #
Stop theve hicle immediately in accordance with the tra1c conditions and switch o. the drive system. Do not con-
tinue driving. #
Do not tow theve hicle, stop towing if necessar y. #
Consult a quali/ed specialist workshop.
d
Performance severely limi-
ted *T
he drive system is outside the normal operating temp erature range, e.g. due toextremely low or high outside temp er-
atures.
The output is se verely re stricted.
Once the operating temp erature of the drive system returns tonormal, the full output will be available again. The dis-
play message will disappear.
*I fth e drive system po wer output is still reduced, there is a fault in the drive system. #
Drive on carefull y. #
Consult a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
421 421

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
6
Please wait Depressurising
tank *V
Vehicles wit ehicles wit h pe
h petr
trol engines:
ol engines: the pressure in the fuel tank is reduced before the fuel /ller 0ap is opened. The pressure
re duction can take up to15 minutes.
6 Tank is depressurised
Ready for refuelling *V
Vehicles wit ehicles wit h pe
h petr
trol engines:
ol engines: the pressure in the fuel tank is released and the fuel /ller 0ap opens.
6
Tank ventilation Malfunc-
tion Consult workshop *V
Vehicles wit
ehicles wit h pe
h petr
trol engines:
ol engines: There is a malfunction in the fuel system. #
Consult a quali/ed specialist workshop. 422
422
Displ
aymessages and warning/indicator lamps

V
V
ehicle
ehicle Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
d
Vehicle is operational
Switch off ignition before
exiting *Y
ou are leaving theve hicle in a ready-to-drive state. #
Get out of theve hicle, secure it against rolling away and take theke y with you. #
Ifyo u do not lea vetheve hicle, switch o. the electrical consumers, e.g. the seat heating. Otherwise, the 12‑V bat-
te ry may dischar geand starting the engine may be possible only with the help of a second battery (jump start).
ï
Operation only possible in
transmission position P *T
he ball neck will not swivel because transmission position h,kor neutral iis selected. #
Depress the brake pedal. #
Engage park position j.
ï Trailer coupling in motion *T
he ball neck is retracting/extending.
Do not attem pttospeed up, slow down or initiate the swivel mo vement using your hand, foot or other aids. During the
swivel mo vement, do not couple a trailer.
When the ball neck has reached an operational position, the display message will disappear. Display messages and
warning/indicator lamps
423 423

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
? *T
he bonn etis open. &
W
WARNING
ARNING Risk of accident due todriving with the bonnet unloc ked
The bonnet may open and blo ckyour vie w. #
Neverre lease the bonnet when driving. #
Before every trip, ensure that the engine bonnet is loc ked. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Close the bonnet.
A *T
hetailgate is open. &
D
DAN
AN GER
GER Risk of poisoning from exhaust gases
Combustion engines emit poisonous exhaust gases, such as carbon monoxide. Exhaust gases can enter theve hi-
cle interior if theta ilgate is open when the engine is running, especially if theve hicle is in motion. #
Always switch o. the engine before opening theta ilgate. #
Never drive with theta ilgate open. #
Close theta ilgate. Display message
s andwarning/indicator lamps
427
427

Engine
Engine
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
To switch off the engine,
press Start/Stop button
for at least 3 seconds or 3
times. *Y
ou ha vepressed the start/s top button while theve hicle is in motion. #
Information about switching o. theve hicle while driving (/ page 166).
Cannot start engine See
Owner's Manual *T
hevehicle cann otbe star ted. #
Switch theve hicle o. and switch it back on #
Ifth e display message still appears, consult a quali/ed specialist workshop.
+
Top up coolant See Own-
er’s Manual *T
he coolant le vel is too lo w.
* N NO
OTE
TE Engine damage due toinsu1cient coolant #
Avoid long journe yswith insu1cient coolant. #
Add coolant (/ page 334). #
Have the engine cooling system checked at a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
429
429

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
ÿ
Coolant Stop vehicle
Switch engine off *T
he coolant is too hot. #
Stop immediately in accordance with the tra1c conditions and switch o. theve hicle. &
W WARNING
ARNING Risk of burns when opening the bonnet
If yo u open the bonnet in theev ent of an overheated engine or /re in the engine compartment, thefo llowing situa-
tions may occur:
R You may come into contact with hot gases.
R You may come into contact with other escaping hot operating 0uids. #
Before opening the bonnet, allow the engine tocool down. #
Intheev ent of a /re in the engine compartment, keep the bonnet closed and call the /re service. #
Wait until the engine has cooled down. #
Make sure that the air supply tothera diator is not obstructed. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C.
ÿ *T
here is a malfunction in the engine cooling system. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C. 430
430
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
8
Reserve fuel level *T
he fuel supply has dropped into there ser verange. #
Refuel.
! Clean the fuel filter *V
Vehicles wit
ehicles wit h diesel engines:
h diesel engines: the fuel /lter is dirty or thewa ter in the fuel /lter needs tobe drained. #
Consult a quali/ed specialist workshop.
¸
Replace air cleaner *V
Vehicles wit
ehicles wit h diesel engines:
h diesel engines: the engine air /lter is dirty and must be replaced. #
Consult a quali/ed specialist workshop. T
T
r
r ansmission
ansmission Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
Only select Park (P) when
vehicle is stationary *I
t is possible toselect the park position jonly if theve hicle is stationar y. #
Depress the brake pedal tostop. Displa
y messages and warning/indicator lamps
431
431

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
ShiT the transmission topark position jwhen theve hicle is stationar y.
Apply brake to deselect
Park (P) position *Y
ou ha veattem pted toshiT the transmission out of park position jand into ano ther transmission position. #
Depress the brake pedal. #
Select transmission position h,kor neutral i.
To shift out of P or N,
depress brake and start
engine *Y
ou ha veattem pted toshiT the transmission out of park position jor neutral iand into ano ther transmission posi-
tion. #
Depress the brake pedal. #
Start theve hicle. #
Change the transmission position.
Apply brake to select R *You ha veattem pted toselect transmission position k. #
Depress the brake pedal. #
Select transmission position k.
Risk of vehicle rolling
Driver door open and trans-
mission not in P *T
he driver's door is not fully closed and transmission position h,kor neutral iis selected.
The vehicle may rollawa y. #
Select pa rkposition jwhen switching o. theve hicle.
N permanently active Risk
of vehicle rolling *W
hiletheve hicle is rolling or while you are driving, neutral ihas been engaged. #
Depress the brake pedal tostop. 432 432
Displa
y messages and warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
ShiT the transmission topark position jwhen theve hicle is stationar y. #
Tocontinue driving, select transmission position hork.
Without changing gear,
consult workshop *T
he transmission is malfunctioning. It is no lon ger possible tochange the transmission position. #
If transmission position his selected, consult a quali/ed specialist workshop and do not change the transmission
position. #
For all other transmission positions, park theve hicle safel y. #
Consult a quali/ed specialist workshop.
Reversing not poss. Con-
sult workshop *T
he transmission is malfunctioning. It is not possible toselect transmission position k. #
Consult a quali/ed specialist workshop.
Transmission Malfunction
Stop *T
he transmission is malfunctioning. The transmission shiTs toneutral iautomaticall y. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Depress the brake pedal. #
Engage park position j. #
Consult a quali/ed specialist workshop.
Stop vehicle Leave engine
running Wait Transmission
cooling *T
he transmission is overheating. Pulling away may be temp orarily impaired or not possible. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Leavethe engine running. #
Wait until the display message disappears before pulling away. Display messages and
warning/indicator lamps
433
433