197 MERCEDES-BENZ R500 2006 W251 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2006, Model line: R500, Model: MERCEDES-BENZ R500 2006 W251Pages: 561
Page 6 of 561
Contents
Automatic transmission ..................... 197
Gear selector lever ....................... 197
Shifting procedure ....................... 199
Transmission positions................. 200
Gear ranges ................................. 202
Driving tips ................................... 203
Automatic shift program .............. 204
Steering wheel gearshift control .. 205
Emergency operation
(Limp Home Mode) ...................... 207
Good visibility .................................... 208
Headlamp cleaning system* ........ 208
Rear view mirrors ......................... 208
Power folding exterior rear view
mirrors* ....................................... 211
Sun visors .................................... 212
Rear door window sunshade* ...... 214
Third-row sunshade* .................... 214
Rear window defroster ................. 215
Climate control .................................. 216
Deactivating the climate control
system ......................................... 220
Operating the climate control
system in automatic mode ........... 221Setting the temperature................ 222
Adjusting air distribution............... 222
Adjusting air volume ..................... 222
Front defroster.............................. 223
Air recirculation mode .................. 224
Air conditioning............................. 226
Residual heat and ventilation ........ 227
Rear climate control ..................... 228
3-zone automatic climate control* ..... 230
Deactivating the climate control
system .......................................... 234
Operating the climate control
system in automatic mode............ 235
Setting the temperature................ 236
Adjusting air distribution............... 236
Adjusting air volume ..................... 237
Front defroster.............................. 238
Maximum cooling MAX COOL ....... 239
Air recirculation mode .................. 239
Air conditioning............................. 241
Using driver-side settings for all
temperature zones........................ 242
Residual heat and ventilation ........ 243
Rear automatic climate control..... 244Power windows .................................. 248
Opening and closing ..................... 248
Synchronizing the door windows .. 251
Summer opening feature .............. 251
Convenience closing feature......... 252
Power tilt/sliding sunroof* ................ 255
Opening and closing ..................... 255
Synchronizing ............................... 258
Panorama roof with power
tilt/sliding panel*............................... 259
Roller sunblinds for the
panorama roof with power
tilt/sliding panel ........................... 259
Opening and closing the
panorama roof with power
tilt/sliding panel ........................... 260
Synchronizing the panorama roof
with power tilt/sliding panel......... 262
Driving systems .................................. 264
Cruise control ............................... 264
AIRMATIC* ................................... 269
Parktronic* (Parking assist) .......... 274
Page 54 of 561
53 Getting started
Driving
Starting the engine Automatic transmission
Gearshift pattern for automatic
transmissionPPark position
RReverse gear
NNeutral
DDrive position
For more information on how to operate
the gear selector lever, see “Automatic
transmission” (
page 197).
Warning!
G
Do not pass belts over sharp edges. They
could tear.
Do not allow the belt to get caught in the
door or in the seat adjustment mechanism.
This could damage the belt.
Never attempt to make modifications to
seat belts. This could impair the effective-
ness of the belts.
Do not bleach or dye seat belts as this may
severely weaken them. In a crash, they may
not be able to provide adequate protection.
Damaged seat belts or belts that were highly
stressed in an accident must be replaced.
Contact an authorized Mercedes-Benz Light
Truck Center.
Warning!
G
Inhalation of exhaust gas is hazardous to
your health. All exhaust gas contains carbon
monoxide, and inhaling it can cause uncon-
sciousness and possible death.
Do not run the engine in confined areas
(such as a garage) which are not properly
ventilated. If you think that exhaust gas
fumes are entering the vehicle while driving,
have the cause determined and corrected
immediately. If you must drive under these
conditions, drive only with at least one win-
dow fully open.
Page 154 of 561
153 Controls in detail
Lighting
Switching off corner-illuminating front
fog lamps
The combination switch for the turn signal
resets automatically after major steering
wheel movements. This will switch off the
corner-illuminating front fog lamps if they
were activated by switching on the left or
right turn signal.
If the turn signal should stay on after mak-
ing the turn, the turn signal and
corner-illuminating front fog lamps can be
switched off by returning the combination
switch to its original position.Driving rearward
Switching on corner-illuminating front
fog lamps
Shift the automatic transmission to
reverse gearR (
page 198).
The inverse front fog lamp comes on
automatically depending on the
steering direction and steering angle.
Switching off corner-illuminating front
fog lamps
Shift the automatic transmission to a
gear other than reverse gearR
(page 197).
The respective front fog lamp goes out.
Hazard warning flasher
The hazard warning flasher can be
switched on at all times, even with the
SmartKey removed from the starter
switch.
The hazard warning flasher switches on
automatically when an air bag deploys.
The hazard warning flasher switch is
located on the upper part of the center
console.
1Hazard warning flasher switch
Page 198 of 561
197 Controls in detail
Automatic transmission
Automatic transmission
For information on driving with an auto-
matic transmission see “Automatic trans-
mission” (
page 53).
Your vehicle’s transmission adapts its gear
shifting process to your individual driving
style by continually adjusting the shift
points up or down. These shift point adjust-
ments are performed based on current
operating and driving conditions.
If the operating conditions change, the
automatic transmission reacts by
adjusting its shift program.
Gear selector lever
The gear selector lever is located on the
right of the steering column.Gearshift pattern for automatic
transmissionPPark position
RReverse gear
NNeutral
DDrive positionShifting from P to N
Moving the gear selector lever up or down
shifts the automatic transmission out of
park positionP:
Depress the brake pedal and keep it
pressed.
Move gear selector lever up or down to
resistance point to select neutral
positionN.
iDuring the brief warm-up, transmission
upshifting is delayed. This allows the
catalytic converter to heat up more
quickly to operating temperature.
Warning!
G
It is dangerous to shift the automatic trans-
mission out of park positionP or neutral
positionN if the engine speed is higher than
idle speed. If your foot is not firmly on the
brake pedal, the vehicle could accelerate
quickly forward or reverse. You could lose
control of the vehicle and hit someone or
something. Only shift into gear when the
engine is idling normally and when your right
foot is firmly on the brake pedal.
Page 200 of 561
199 Controls in detail
Automatic transmission
Shifting from D, R, or N to P
If you want to select park positionP with
the transmission being in drive positionD,
reverse gearR or neutral positionN:
With the vehicle at a standstill, depress
the brake pedal and keep it pressed.
Step firmly on parking brake pedal
(page 65).
Press button on gear selector lever in
direction of arrow (
page 197) to
select park positionP.
Release the brake pedal.Shifting from D or R to N
If you want to select neutral positionN
with the transmission being in drive
positionD or reverse gearR:
With the vehicle at a standstill, depress
the brake pedal and keep it pressed.
Step firmly on parking brake pedal
(page 65).
Move gear selector lever up to resis-
tance point when in drive position D or
down to resistance point when in re-
verse gear R to select neutral
positionN.
Release the brake pedal.
Shifting procedure
The automatic transmission selects indi-
vidual gears automatically, depending on:
drive positionD (
page 200) with
gear ranges (
page 202)
the selected program mode (C/S)
(page 204)
the position of the accelerator pedal
(page 203)
the vehicle speed
The current gear range/transmission
position and program mode (
C/S) appear
in the multifunction display.
1Current transmission position
!Shift the automatic transmission
directly from positionD toR, fromR
toD or directly toP only when the
vehicle is stopped. Otherwise the
automatic transmission could be
damaged.
When trying to free a vehicle stuck in
mud or snow, see “Rocking the vehicle”
(page 204).
iWhen the vehicle needs to be moved
with the engine switched off and the
transmission set to N (
page 200),
e.g. in an automatic car wash, do not
depress the parking brake pedal.
Page 479 of 561
478 Practical hintsFlat tire
Preparing the vehicle
Park the vehicle in a safe distance from
moving traffic on a hard, flat surface
when possible.
Turn on the hazard warning flasher
(page 153).
Turn the steering wheel so that the
front wheels are in a straight-ahead
position.
Set the parking brake (
page 65).
Set the automatic transmission to P
(page 197).
Vehicles with SmartKey:
Turn off the engine (
page 66).
Remove the SmartKey from the starter
switch.Vehicles with KEYLESS-GO*:
Turn off the engine by pressing the
KEYLESS-GO* button once
(page 66).
Open the driver’s door (this puts the
starter switch in position 0, same as
with the SmartKey removed from the
starter switch). The driver’s door then
can be closed again.
Have any passenger exit the vehicle at
a safe distance from the roadway.
Warning!
G
The dimensions of the spare wheel are dif-
ferent from those of the road wheels. As a
result, the vehicle handling characteristics
change when driving with a spare wheel
mounted. Adapt your driving style accord-
ingly.
The spare wheel is for temporary use only.
When driving with spare wheel mounted,
ensure proper tire inflation pressure and do
not exceed a vehicle speed of
50 mph (80 km/ h).
Drive to the nearest Mercedes-Benz Light
Truck Center as soon as possible to have the
spare wheel replaced with a regular road
wheel.
Never operate the vehicle with more than
one spare wheel mounted.
Do not switch off the ESP
® with a spare
wheel mounted.
iOpen doors only when conditions are
safe to do so.