Radio control MERCEDES-BENZ S-Class 2005 W220 Comand Manual

Contents
Introduction . . . . . . . . . . . . . . . . . . . . . 7
Where to find it . . . . . . . . . . . . . . . . . . . 7
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating safety. . . . . . . . . . . . . . . . . . . 9At a glance . . . . . . . . . . . . . . . . . . . . . 11
Radio operating elements . . . . . . . . . . 12
CD operating elements . . . . . . . . . . . . 14
Satellite radio* operating elements . . . 16
Telephone* operating elements . . . . . . 18
Navigation operating elements . . . . . . 20
Service operating elements . . . . . . . . . 22
Menu system . . . . . . . . . . . . . . . . . . . . 24
Quick reference COMAND . . . . . . . . . . 27
Switching the COMAND
control unit on and off . . . . . . . . . . 27
Volume . . . . . . . . . . . . . . . . . . . . . . 27
Balance and fader. . . . . . . . . . . . . . 29
Bass and Treble . . . . . . . . . . . . . . . 30
Sound functions* . . . . . . . . . . . . . . 31
Audio. . . . . . . . . . . . . . . . . . . . . . . . . . 33
Audio menu . . . . . . . . . . . . . . . . . . . . . 34
Opening the Audio menu . . . . . . . . 34
Selecting an audio source . . . . . . . 34
Radio operation . . . . . . . . . . . . . . . . . . 35
Muting . . . . . . . . . . . . . . . . . . . . . . 35
Switching the radio operation on . . 35
Changing the Radio band . . . . . . . . 36
Selecting a station . . . . . . . . . . . . . 37
Memory functions . . . . . . . . . . . . . . 40
CD operation . . . . . . . . . . . . . . . . . . . . 44
General Information
on CD operation . . . . . . . . . . . . . . . 44
Tips on caring for your CDs . . . . . . 45
Switching to CD operation . . . . . . . 46
Loading CDs . . . . . . . . . . . . . . . . . . 46
Switching on . . . . . . . . . . . . . . . . . . 48
Selecting a CD
(CD changer* only) . . . . . . . . . . . . . 49
Track select . . . . . . . . . . . . . . . . . . 50
Fast forward/reverse . . . . . . . . . . . 52
Muting . . . . . . . . . . . . . . . . . . . . . . 53
Playback mode . . . . . . . . . . . . . . . . 53MP3-CD operation . . . . . . . . . . . . . . . . 55
General Information . . . . . . . . . . . . 55
Tips on caring for your MP3-CDs . . 56
Switching to MP3-CD operation . . . 56
MP3-CD main menu . . . . . . . . . . . . 57
Selecting a folder . . . . . . . . . . . . . . 58
Selecting a track . . . . . . . . . . . . . . . 58
Playback mode . . . . . . . . . . . . . . . . 60
MP3 options . . . . . . . . . . . . . . . . . . 61
DVD operation . . . . . . . . . . . . . . . . . . . 63
General information
on DVD operation . . . . . . . . . . . . . . 63
DVD playback requirements . . . . . . 64
Switching to DVD operation . . . . . . 64
Loading a DVD . . . . . . . . . . . . . . . . 65
Ejecting a DVD . . . . . . . . . . . . . . . . 66
Soft key display and status bar. . . . 67
Soft key functions . . . . . . . . . . . . . . 68
DVD menu. . . . . . . . . . . . . . . . . . . . 70
Settings menu. . . . . . . . . . . . . . . . . 71
Adjusting brightness, contrast
and color . . . . . . . . . . . . . . . . . . . . . 74
Selecting a movie . . . . . . . . . . . . . . 74
Selecting a scene/chapter . . . . . . . 75
Fast forward/reverse . . . . . . . . . . . 75

7
Where to find itIntroduction

Where to find itThis Operator’s Manual is designed to pro-
vide support information for you, the
COMAND operator. Each chapter has its
own guide color to provide fast access to
information.At a glance
Here you will find an overview of
all COMAND control elements and system
components. If you are operating
COMAND for the first time or if you have
rented or borrowed the vehicle, this is the
chapter you should read first.Audio
Here you will find all the information on
how to use the radio, CD player, CD chan-
ger* and DVD drive.
Satellite radio*
This chapter provides information on how
to select a station and a program category.Telephone*
Here you can learn in detail about the
many functions of the telephone, how to
initiate an emergency call and use the pho-
ne book.Navigation
This chapter provides detailed information
on the following topics:
Destination input

Route guidance including detour

Last destinations and destination
memory

POIs
Service
Here you will find all the information about:
SMS

Address book

Tele Aid*
System settings
This chapter provides information on how
to adjust COMAND system settings.Directories
The glossary explains the most important
technical terms.
The table of contents and index directory
will help you quickly locate the information
you need.

9 Introduction
Operating safety

Operating safety
Warning
G
Any alterations made to electronic compo-
nents and the software can cause malfunc-
tions.
The radio, amplifier, CD changer*, satellite
radio*, telephone*, navigation module and
voice control system* are interconnected.
When one of the components is not operati-
onal or has not been removed/replaced pro-
perly, the function of other components may
be impaired.
This condition might seriously impair the
operating safety of your vehicle.
We recommend that you have any service
work on electronic components carried out
only by qualified personnel.
Warning
G
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings with the vehicle at a stand-
still and operate the system only when road
and traffic conditions permit.
Bear in mind that at a speed of just
30 mp/h (approximately 50 km/h), your car
is covering a distance of 44 feet (approxima-
tely 14 m) every second.
COMAND supplies you with information to
help you select your route more easily and
guide you conveniently and safely to your
destination. For safety reasons, we encoura-
ge the driver to stop the vehicle in a safe
place before answering or placing a call, or
consulting the COMAND screen to read na-
vigational maps, instructions, or downloa-
ded information.
While the navigation system provides direc-
tional assistance, the driver must remain fo-
cused on safe driving behavior, including
attention to traffic and street signs, and
should utilize the system’s audio cues while
driving.
The navigation system does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. This al-
ways remains your personal responsibility
when you drive. DVD maps do not cover all
areas nor all routes within an area.

13 At a glance
Radio operating elements
Function
Page
1
Audio menu
34
2
Soft keys
(multifunction keys)
3
Color display with Radio
main menu
4
1 - 0
Station selection
Saving stations manually
Selecting a station from
the preset memory
38
40
42
5
H,h,g,G
Function selection
g and G
e.g.
Automatic seek tuning
H and h
e.g. Manual tuning
37
37
Function
Page
6
E Confirm
7
J
Muting
35
8
Volume control
28
9
e Switching on and off
27
a,
b
d and D
Automatic seek tuning
Manual tuning
37
37

17 At a glance
Satellite radio* operating elements
Function
Page
1
Satellite radio main menu
Switching satellite radio
operation on and off
80
80
2
Soft keys
(multifunction keys)
3
Color screen with Satellite
radio main menu
4
1 - 0
Station selection
Saving stations manually
82
83
5
H,h,g,G
Function selection
6
E Confirm
Function
Page
7
J
Muting
81
8
Volume control
28
9
e Switching on and off
27
a,
b
d and D
Previous or next channel
81

27 At a glance
Quick reference COMAND

Quick reference COMAND
Switching on
Turn the key in the steering column
lock to position 1 or 2.
or

Press e.
In both cases, the system will activate
the operating mode which was active
when the system was switched off.Switching off

Turn the key in the steering column
lock to position 0 and pull the key out.
or

Press e.
The volume is adjusted jointly for the
telephone*, the navigation system and the
Voice control system.
The volume setting applies to other
operating modes as well: Radio, CD,
CD changer*, MP3-CD and DVD.
When you adjust the volume, the system
will automatically store the setting for the
current operating mode. The volume for
the navigation announcements can only be
changed while an announcement is being
made.
iYou have the following options to
control the system:
at the COMAND

at the multifunction steering wheel
(refer to vehicle Operator's Manual)

using the Voice control system*
(refer to separate operating
instructions for further information)
This Operator’s Manual describes the
control at the COMAND.
Unless otherwise indicated, the
descriptions and illustrations refer to
the COMAND.
Switching the COMAND control unit
on and offiIf the key is not in the steering lock in
position 1 or 2, the system will
automatically stop after around 30
minutes. A warning is displayed prior to
the system switching off.
Volume

31 At a glance
Quick reference COMAND
Bass and Treble Control
Activate the Bass or Treble menu
(page 30).

Press H or h.
Bass or Treble is adjusted.

Press E or the
Back
soft key.
or

Wait until the display changes.
The new setting is saved.If your vehicle is provided with the sound
system*, the sound functions* will be
available for the following operating
modes.

Radio operation

CD operation

MP3-CD operation

DVD operation

Satellite radio* operation
The following sound functions* are
available:

Default:COMAND set the sound linear for the
center of the vehicle.

Front optimized:COMAND set the sound linear for the
front of the vehicle.

Rear optimized:COMAND set the sound linear for the
rear of the vehicle.

Speech optimized:Playback optimised for language
comprehensibility.

Surround:Surround playback (not for radio).
You can use different sound functions* for
the modes mentioned above.
Example:
For radio operation the function
Default
, for CD operation the function
Surround
.
Sound functions*

78 Satellite radio*Important notes

Important notesIn chapter “Satellite radio”, you will find
detailed information regarding
selecting a station and a program cate-
gory

memory functions

sound adjustments
If you have not done so already, please fa-
miliarize yourself with these functions by
reading chapter “At a glance”.iAdditional optional satellite radio equip-
ment and a subscription to satellite ra-
dio service provider are required for the
satellite radio operation described here.
Contact your authorized Mercedes-
Benz Center for details and availability
for your vehicle.
iNote that categories and channels
shown in illustrations are dependent on
programming content delivered by the
service provider. Programming content
is subject to change. Therefore, channel
and categories shown in illustrations
and descriptions contained in this ma-
nual may differ from the channels and
categories delivered by the service pro-
vider.
Satellite radio service may be unavai-
lable or interrupted from time to time
for a variety of reasons, such as envi-
ronmental or topographic conditions
and other things we can’t control. Ser-
vice might also not be available in cer-
tain places (e.g., in tunnels, parking
garages, or within or next to buildings)
or near other technologies.
iSirius Satellite Radio provides approxi-
mately 100 channels, so called
streams, of digital-quality radio, among
others music, sports, news, and enter-
tainment commercial-free.
Sirius Satellite Radio uses a fleet of
high-power satellites to broadcast 24
hours per day, coast-to-coast, in the
contiguous U.S.
This diverse, satellite-delivered pro-
gramming is available for a monthly
subscription fee. For more information
and service availability, call the Sirius
Service Center (
page 79) or contact
www.siriusradio.com.

96 Telephone*Telephone operationEntering the PUK
If you enter your PIN incorrectly three
times in a row, you need to enter the PUK
number.
The PUK can only be entered at the mobile
phone. Refer to the mobile phone
operator’s manual.When the COMAND is switched on, you
can switch to telephone operation from
any other system (e.g. radio):

Press a.
The Telephone menu will appear.The telephone is ready for operation
Message
Ready
and the reception
strength Ö are shown on the status bar.
Other messages

Roaming The mobile phone is using a non home
type system

no Serv.The mobile phone is not logged into a
network
Fault messages:
Telephone Not Inserted
Plug the mobile phone into the mobile
phone cradle*. Refer to the separate
mobile phone operator’s manual.
Telephone UnavailableYour vehicle may not have a mobile phone
cradle* installed and/or the telephone
control unit may not be coded properly.
Contact an authorized Mercedes-Benz
Center.
iThe PUK number is provided by your
mobile phone service provider.
Switching to telephone operation

98 Telephone*Telephone operationSetting the volume for hands-free ope-
ration
Raising the volume
Turn the rotary control on the e but-
ton to the right.
Lowering the volume

Turn the rotary control on the e but-
ton to the left.
For more information, see chapter “At
a glance” (
page 27).Sound settings
You can change the sound settings (only
Bal/Fad) during a conversation.
For more information, see chapter “At a
glance” (
page 29).
Additional control functions are explained
at “Active Call” (
page 102).
Ending a call

Press K.
You can use the following functions to
make a phone call:

Dialing a telephone number
(page 98)

Redial (
page 99)

Selecting an entry from the dialed
numbers list (
page 100)

Selecting an entry from the received
calls list (
page 101)

Use speed-dialing (
page 102)

Use quick-dialing (
page 102)

Selecting a phone book entry and
dialing the number (
page 105)
Dialing a telephone number
Entering a telephone number

Open the Telephone menu
(page 96).
iThis function is possible during an
active call, otherwise volume of audio
source, e.g. radio is changed.
After ending the call, the system stores
the current volume setting. If current
volume setting exceeds the default set-
ting, then the system will use the de-
fault level for next incoming/outgoing
call.
iNo ring or DTMF tones will be heard
when a mobile phone set to silent mode
is inserted into the cradle. For ringtone
settings, refer to the separate opera-
ting instructions for the mobile phone.Outgoing calls
iYou can also make a phone call from
the address book (
page 176) and
using the Voice control system*. Refer
to separate Voice control system*
operating instructions.