MP3 MERCEDES-BENZ S550 2007 W221 Owner's Manual

ContentsAnti-theft systems................................ 75
Immobilizer..................................... 75
Anti-theft alarm system .................. 75
Tow-away alarm ............................. 76
Canceling the alarm ....................... 76Control systems................................ 77
COMAND operating safety ................... 78
COMAND introduction ......................... 79
Availability of functions while
the vehicle is in motion .................. 79
Switching COMAND on or off ......... 79
COMAND components ................... 79
Operating COMAND ....................... 84
Main menus of COMAND ............... 89
COMAND FM/AM radio ....................... 93
Submenu overview ......................... 93
Switching to radio mode ................ 94
Switching wavebands ..................... 94
Selecting stations/channels .......... 94
Saving stations ............................... 96
Station name display ...................... 97COMAND satellite radio* (USA only) ... 98
Submenu overview ......................... 98
Introduction to Satellite radio ........ 98
Switching to satellite radio............. 99
Main satellite radio menu............. 100
Selecting program category ......... 100
Tuning in channels ....................... 100
Saving channels ........................... 102
Show program info ....................... 103
Channel update ............................ 103
Calling Sirius Service Center ........ 103
COMAND audio CD/
audio DVD/MP3 ................................ 104
Safety precautions ....................... 104
Notes about MP3 mode ............... 104
Notes about audio DVD
operation...................................... 106
Notes about CDs / DVDs .............. 106
Notes about handling CDs /
DVDs ............................................ 107
Inserting CDs and DVDs............... 107
Inserting a PCMCIA card .............. 108
Ejecting CDs and DVDs ................ 109Ejecting a PCMCIA card ............... 109
Submenu overview....................... 110
Switching to audio CD,
audio DVD or MP3 mode ............. 111
Stop function ............................... 112
Pause function ............................. 112
Selecting CD/DVD/MP3 media . 112
Selecting a track .......................... 113
Fast forward/rewind .................... 113
Selecting a folder ......................... 113
Setting the audio format .............. 114
Playback options.......................... 114
COMAND telephone* ........................ 115
Safety precautions ....................... 115
General notes .............................. 115
Switching telephone on or off ...... 116
Activating telephone mode .......... 117
Telephone keypad ........................ 117
“911” emergency call .................. 117
Entering the PIN ........................... 119
Entering the PIN2......................... 119
Entering the PUK / PUK2 .............. 119
Entering the unlock code ............. 119

Contents
Instrument cluster control system ..... 241
Multifunction display .................... 241
Multifunction steering wheel ........ 242
Menus .......................................... 243
Trip menu ..................................... 245
Navi menu .................................... 246
Audio menu .................................. 248
Telephone menu*......................... 249
Assistance menu* ........................ 252
Service menu ............................... 253
Settings menu .............................. 254
Voice Control* operating safety ........ 257
Voice Control* introduction............... 258
Spelling ........................................ 259
Command types ........................... 259
Active System .............................. 259
Controls ....................................... 260
Symbols ....................................... 261
Voice Control* telephone .................. 262
Telephone operation .................... 262
Telephone commands .................. 263
Voice Control* navigation.................. 269
Important notes ........................... 269
Navigation operation .................... 270
Navigation commands.................. 270Dialog for entering a complete
address ......................................... 271
Commands for entering parts
of an address ................................ 276
Voice Control* address book ............. 279
COMAND address book overview . 279
Operation with address book
not open (global) ........................... 279
Operation with address book
open (local) ................................... 279
Operating and using address
book.............................................. 280
Available commands with the
address book not open ................. 280
Available commands with the
address book open ....................... 281
Voice Control* radio........................... 282
Radio operation ............................ 282
Radio commands .......................... 282
Voice Control* CD/
DVD changer/MP3 ............................. 286
Operation ...................................... 286
Commands.................................... 286
Voice Control* command list ............. 288
Command list................................ 288Voice Control* troubleshooting.......... 299
Help function ................................ 299
Help commands............................ 299
Help window ................................. 299
Entering digits and spelling........... 299
What to do if ... ............................. 300
Voice Control* individualization ......... 302
Controls in detail.............................. 303
Locking and unlocking ....................... 304
SmartKey ...................................... 304
SmartKey with KEYLESS-GO* ....... 306
Checking batteries in the SmartKey
or SmartKey with KEYLESS-GO ..... 311
Loss of the SmartKey or SmartKey
with KEYLESS-GO ......................... 311
Opening doors from the inside ..... 312
Power closing assist for doors
and trunk lid ................................. 313
Automatic central locking ............. 313
Locking and unlocking
from the inside ............................. 314

77 Control systems
COMAND operating safety
COMAND introduction
COMAND FM/AM radio
COMAND satellite radio* (USA only)
COMAND
audio CD/audio DVD/MP3
COMAND telephone*
COMAND navigation (introduction)
COMAND navigation system
(entering a destination)
COMAND navigation system
(Point of interest entry)
COMAND navigation system
(route guidance)
COMAND navigation system
(during route guidance)
COMAND navigation system
(destination memory)
COMAND navigation system
(last destinations)COMAND address book
COMAND system settings
COMAND vehicle menu
COMAND automatic climate control
COMAND seats
Instrument cluster control system
Voice Control* operating safety
Voice Control* introduction
Voice Control* telephone
Voice Control* navigation
Voice Control* address book
Voice Control* radio
Voice Control*
CD/DVD changer/MP3
Voice Control* command list
Voice Control* troubleshooting
Voice Control* individualization

84 Control systemsCOMAND introductionOperating COMAND
Menu overview
The illustration below shows the structure
of the main menus and their main menus.Each main menu has a main menu. Each
menu item in the main menu in turn has
several submenu items.
Navi
Page
Audio
Page
Telephone*
Page
Vehicle
Page
Commands/menusMap Display
150
FM/AM Radio
93
Telephone*
115
Exterior Lighting Delayed Switch-off
220
Mode
152
Sat Radio*
(USA only)
98
Address Book*
202
Locator Lighting
221
CD
104
Telephone OFF*
116
Exterior Mirror Convenience Settings
222
DVD-Audio
104
Automatic Locking
223
MP3
104
Easy Entry/Exit Feature
224
Audio OFF
92
Interior Lighting Delayed Switch-off
226
Interior Ambient Light
225
Rear Window Sunshade*
227
Trunk Opening-height Restriction
227
Tow-away Alarm
228

91 Control systems
COMAND introduction
Adjusting balance or fader
Balance is used to determine whether the
sound focus should be shifted toward the
driver’s side or the passenger’s side.
Fader is used to determine whether the
sound focus should be shifted toward the
front or rear of the vehicle
Select “Sound”
“Balance/Fader”.
The setting last selected is indicated by
an outlined bar.
Adjusting balance and fader1Current setting indicated by orange
cross-hair symbol

Changing setting: Slide rmq or omp
until desired balance/fader setting is
reached.

Exiting menu: Press n or L.
The setting is saved.
Surround sound
With surround sound, you can choose be-
tween “LOGIC7
® ON” and “LOGIC7
® OFF”.
Harman/kardon LOGIC7
® surround sound
is available for the following operating
modes:


Audio DVD (MLP, DTS, PCM, and Dolby
Digital audio formats)


Audio CD


MP3


Radio (FM, AM, WB,
Satellite* (USA only))


PCMCIA
i
Since some DVDs contain both stereo as
well as multi-channel audio formats, it may be
necessary to adapt the audio format
(
page 114).
i
The “LOGIC7
® ON” function of the har-
man/kardon LOGIC7® surround sound system
makes it possible to play discrete 5.1 and stereo
recordings with optimal surround sound for ev-
ery passenger. Music on CDs or audio DVDs with
high-resolution surround formats such as MLP,
DTS or Dolby Digital is played back optimally.
For an ideal sound experience on all seats,
LOGIC7
® distributes 5.1 surround information
via the 13-channel system architecture. The re-
sult is a sound as intended by the sound engi-
neers during the original recording.
harman/kardon LOGIC7
® converts all two-chan-
nel stereo sound material into multi-channel sur-
round sound. With the help of LOGIC7
®,
surround information stored during the original
recording are read out and distributed through
the 13 channels. No effects are created during
this process; only that which was already there
becomes audible.
In addition, harman/kardon LOGIC7
® moves the
perceived sound source away from the individual
loudspeakers, thus generating a natural 360°
sound experience for every passenger.

92 Control systemsCOMAND introductionAdjusting surround sound
With surround sound, you can choose be-
tween “LOGIC7
® ON” and “LOGIC7
® OFF”.

Select “Sound”
“3D Sound”.
Adjusting surround sound1Current setting

Selecting a setting: Slidermq or
rotateymz.

Saving setting: Press n
The setting is saved and the menu is
closed.

Exiting menu without saving chang-
es: Press L or slide omp.Switching off/on the audio source

Switching off: Select “Audio”
“Au-
dio”
“Audio OFF”.
The audio source is switched off; “Au-
dio OFF” appears in the display.

Switching on: Select “Audio”, then the
desired audio source.
or

Load CD/DVD (
page 107) or a
PCMCIA card (
page 108).
i
By selecting “LOGIC7
® OFF”, all compatible
formats as they are present on the medium are
played back. Due to the vehicle’s spatial charac-
teristics, an optimal sound experience is not en-
sured on all seats.
i
Please note the following:


For an ideal sound experience at all seats,
the balance and fader should be adjusted to
the center of the passenger compartment
with LOGIC7
® switched on.


The best sound results are achieved by play-
ing high-quality audio CDs and audio DVDs.


For MP3 tracks, the bit rate should be at
least 128kBit/s.


Surround sound does not function for
mono-signal sources.


In the event of poor radio reception quality,
e.g. inside a tunnel, you should switch off
LOGIC7®, as a dynamic switch from Stereo
to Mono could occur, resulting in temporary
sound distortion.


With some stereo recordings, the resulting
sound may deviate from conventional stereo
playback.
i
When you insert an audio CD or audio DVD,
it automatically becomes the active audio
source.

104 Control systemsCOMAND audio CD/audio DVD/MP3Safety precautions
Notes about MP3 mode
Permissible media for MP3 files

CD-R and CD-RW


DVD+R and DVD+RW


DVD-R and DVD-RW


PCMCIA card (
page 108)Permissible file systems


ISO9660 / Joliet for CDs


UDF for DVDs


FAT16 or FAT32 for PCMCIA cards with
storage medium
Multisession CDs
For multisession CDs, the first session
type of the CD determines how COMAND
will process the CD.
For example, if the first session type is ac-
cording to the audio CD standard and the
second session type is according to the
data CD standard containing MP3 tracks,
COMAND will treat the CD as a conven-
tional audio CD. This means that it is only
possible to access the audio CD tracks.
Access to the MP3 tracks is not possible.
Similarly, if the first session type is accord-
ing to the data CD standard containing
MP3 tracks and the second session type is
according to the audio CD standard, CO-
MAND will treat the CD as a data CD. This
Warning!
G
COMAND is classified as a Class 1 laser
product. You must not open the casing.
There is a risk of exposure to invisible laser
radiation if you open the casing, or if the
casing is faulty or damaged.
COMAND does not contain any parts that
you are able to maintain yourself. For safety
reasons, all maintenance work must be car-
ried out by qualified technicians.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
Warning!
G
Only carry out the following when the vehi-
cle is stationary:

Inserting a disc


Ejecting a disc
There is a risk of accident by being distract-
ed from road and traffic conditions if you
load a CD/DVD while the vehicle is in mo-
tion.

105 Control systems
COMAND audio CD/audio DVD/MP3
means that it is only possible to access the
MP3 tracks. Access to the audio CD tracks
is not possible.
File structure on a disc
When you create an MP3 disc, the MP3
tracks can be organized in folders. A folder
can also contain other folders. A disc can
contain a maximum of 255 folders. Each
folder can contain a maximum of
255 tracks and 255 folders. A disc can
contain a maximum of 4,000 tracks. Usual-
ly this number will not be reached because
each minute of an MP3 track requires ap-
proximately 1 MB of storage space.
Track and folder names
When you create an MP3 disc, you can as-
sign names to the MP3 tracks and folders.
COMAND uses these names for the corre-
sponding display in MP3 mode. Empty fold-
ers or folders which contain data other
than MP3 tracks are not displayed by
COMAND.If MP3 files are saved in the root directory
itself, the root directory will also be treated
as a folder. COMAND will then show the
name of the root directory as the folder
name.
You must observe the following when as-
signing track names:


Track names must have at least one
character.


Track names must have the extension
“mp3”.


There must be a period between the
track name and the extension.
Example of a correct track name:
Track1.mp3
Permissible MP3 formats
COMAND supports the MPEG1 Audio Lay-
er 3 format.Permissible bit and sampling rates


Fixed and variable bit rates up to
320 kbit / s


Sampling rates of 24 kHz – 48 kHz
Notes on copyright
The music tracks that you create for MP3
mode and can play back in MP3 mode are
generally subject to copyright protection in
accordance with the applicable interna-
tional and national regulations.
In many countries, reproductions are not
permitted without the prior consent of the
copyright holder, not even for private use.
Make sure that you know the applicable
copyright regulations and that you comply
with these.
i
COMAND does not support ID3 tags.
i
This format is generally known as “MP3”.
i
Only use MP3 tracks with a bit rate of at
least 128 kbit / s and a sampling rate of at least
44.1 kHz. Smaller rates can cause a noticeable
deterioration in sound quality. This is especially
the case if you have activated a surround sound
function.

106 Control systemsCOMAND audio CD/audio DVD/MP3If you own these rights yourself, e.g. for
your own compositions and recordings, or
the copyright holder has granted you per-
mission, these restrictions do not apply.Notes about audio DVD operation
COMAND can playback commercially
available, prerecorded audio DVDs that
bear the following label. You will usually
find the label on the DVD booklet, the inlay,
or the DVD itself.
Data on audio DVDs are stored either in
uncompressed format or in lossless com-
pressed format. The sound quality on au-
dio DVDs is therefore better than on
recordable DVDs that contain MP3 data
because the MP3 format uses a lossy type
of compression.You cannot delete data from or record
additional data to commercially available,
prerecorded audio DVDs.
Please note the following information
about CDs/DVDs and pay special atten-
tion to the notes on copied and/or
self-written CDs/DVDs.
Notes about CDs / DVDs
i
Audio DVDs differ from recordable DVD-R,
DVD+R, DVD-RW and DVD+RW discs.
i
COMAND cannot playback video DVDs.
i
Audio CDs with copy protection are not
compatible with the CD audio standard and
therefore may not be able to be played by
COMAND.
There may be playback problems when playing
copied discs.
There is a large variety of discs, disc-writing soft-
ware and writers available. This variety means
that there is no guarantee that the system will be
able to play discs that you have written/copied
yourself.
There may be playback problems if you use CD-R
or CD-RW type discs you have copied yourself
with a storage capacity of more than 700 MB.
These CDs are not compatible with currently ap-
plicable standards.
!
Do not affix stickers or labels to the discs.
These could peel away and damage COMAND.
COMAND is designed to hold discs which com-
ply with the IEC 60908 standard. You can there-
fore only use discs with a maximum thickness of
1.3 mm.
If you insert thicker discs, e.g. those that contain
data on both sides (DVD on one side and audio
data on the other), they cannot be ejected and
can damage COMAND.
Do not use discs with an 8-cm diameter, even if
they have an adapter.
Only use round discs with a 12-cm diameter.

107 Control systems
COMAND audio CD/audio DVD/MP3
Notes about handling CDs / DVDs

Only hold discs by the edge.


Handle discs carefully to prevent play-
back problems.


Avoid getting scratches, fingerprints
and dust on discs.


Clean discs from time to time with a
commercially-available cleaning cloth.
Do not wipe them with a circular mo-
tion, but only in straight lines from the
center outwards.


Only use a pen designed for such a pur-
pose to label discs.


Place discs back in their boxes after
use.


Protect discs from heat and direct sun-
light.
Inserting CDs and DVDs Loading the CD/DVD changer
The CD/DVD changer can hold up to a to-
tal of 6 audio CDs or DVDs.
1Disc slot
2Load button (all magazine trays)
3Magazine tray buttons 1 – 6Warning!
G
Only insert a CD or DVD when the vehicle is
stationary. There is a risk of accident by be-
ing distracted from road and traffic condi-
tions if you load a CD/DVD while the vehicle
is in motion.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.i
If the CD / DVD has a printed side, this must
face upwards when the CD / DVD is inserted. If
neither side is printed, the side to be played
should face downwards.
i
Each magazine tray button3 indicates the
status of the corresponding magazine tray by
means of an LED.


LED off = magazine tray is empty


LED constantly lit = magazine tray is loaded


LED flashes = CD/DVD changer requesting
disc to be loaded