manual radio set MERCEDES-BENZ S550 4MATIC 2008 W221 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2008, Model line: S550 4MATIC, Model: MERCEDES-BENZ S550 4MATIC 2008 W221Pages: 761
Page 102 of 761
101 Control systems
COMAND FM/AM radio
Switching to radio mode
Select “Audio” “Audio” “FM/AM
Radio”.
or
Press the M shortcut button once or
twice.
The radio display appears once you
have switched to radio mode. You will
hear the station/channel last tuned in
in the previously selected waveband,
provided that the station/channel can
be received.
Illustration: radio mode in FM waveband
1Main area with frequency display
2Preset position of selected station
3Frequency of selected station
4Name of selected station
5Sound settings
6To switch to Weather Band
7To switch to AM waveband
8Selected waveband
9Preset options
aRadio options
Switching wavebands
You can switch between the FM, AM and
WB (Weather Band) wavebands.
Select “Audio” “Audio” “FM/AM
Radio” “FM” or “AM” or “WB”.
You will hear the station last tuned in
on the selected waveband.
Selecting stations/channels
You have the following selection options:
The station list
The search function
The station presets
The manual frequency entry
The channel list
iThe number of times you have to press the
M shortcut button depends on the operating
mode currently selected.
iStation name display 4 is available for the
FM waveband and can only be seen when it is
switched on (
page 104) and if the station
transmits a name.
Page 103 of 761
102 Control systems
COMAND FM/AM radio
Selecting stations using the station list
Select “Audio” “Audio” “FM/AM
Radio” “FM”.
Select “Radio” “Station List”.
The station list appears. The dot R in
front of a list entry indicates the cur-
rently selected station. A number in
front of the list entry indicates the pre-
set position in the station preset mem-
ory.
Select a station by rotating ymz or
sliding qmr and press n.
Selecting stations/channels using the
search function
Slide omp or rotate ymz when the
main area is selected.Depending on the direction in which
the controller is being slid or rotated,
the system searches upward or down-
ward and stops at the next receivable
station/channel.
Selecting stations using station
presets
Select “Audio” “Audio” “FM/AM
Radio” “FM” or “AM”.
Select “Presets”.
or
Press n when the main area is select-
ed.
The preset menu appears. The dot R
in front of a preset position indicates
that the currently selected station is
saved there.
Select station preset by rotating ymz
or sliding qmr and press n.Selecting stations by entering the fre-
quency manually
Select “Audio”“Audio”“FM/AM
Radio”“FM” or “AM”.
Select “Radio”“Frequency Entry”.
The menu for manual frequency entry
appears.
Exiting menu without making an
entry: Press L back button in the
center console (
page 86).
Increasing or decreasing number:
Slide qmr or rotate ymz.
Selecting the next number:
Slidemp.
Confirming frequency entry:
Pressn.
COMAND tunes in to the frequency
entered.
iThe station list is only available for the FM
waveband. It contains all the stations that can be
currently received and is sorted by station fre-
quencies.
iThis function is not available for Weather
Band.
iThis function is not available for Weather
Band.
iYou can only select currently permitted
numbers.
Page 104 of 761
103 Control systems
COMAND FM/AM radio
Selecting channels using the channel
list
Select “Audio” “Audio” “FM/AM
Radio” “WB” “Channel”.
or
Press n when the main area is select-
ed.
The channel list appears. The dotR in
front of a list entry indicates the cur-
rently selected channel.
Select channel by rotating ymz or
slidingqmr and press n.
Saving stations
You have the following options:
Saving stations manually
Saving stations using Autostore
Saving stations manually
Option 1
Select “Audio” “Audio” “FM/AM
Radio” “FM” or “AM”.
Select “Radio ” “Save Station”.
Option 2
Press n when the main area is select-
ed.
Option 3
Select “Audio” “Audio” “FM/AM
Radio” “FM” or “AM”.
Select “Presets”.All three of these will call up a station pre-
set screen. The dot R in front of a preset
position indicates that the currently select-
ed station is saved there.
Selecting a preset position:
Slideqmr or rotate ymz.
Saving a station to a selected preset po-
sition
If you have called up the station preset
screen using option 1:
Press n briefly.
In options 2 and 3:
iIf you enter a frequency in the AM waveband
which is outside the frequency range, COMAND
tunes in to the next lowest frequency.
iThis function is only available for Weather
Band.
iTwenty stations can be saved in each wave-
band except for Weather Band.
Page 105 of 761
104 Control systems
COMAND FM/AM radio
Press and hold n until you hear a sig-
nal.
The station is saved.
Saving using autostore
Option 1
Press n when the main area is select-
ed.
Select “Autostore”.
Option 2
Select “Audio” “Audio” “FM/AM
Radio” “FM” or “AM”.
Select “Presets” “Autostore”.Option 3
Select “Audio” “Audio” “FM/AM
Radio” “Radio” “Save Station”
“Autostore”.
Station name display
1Station name display
Switching the station name display
on/off: Select “Audio” “Audio”
“FM/AM Radio” “FM” “Radio”
“Show Station Info”.
The display is switched on or off, de-
pending on the previous setting. When
the display is switched on, a check-
mark appears in front of the
“Show Station Info” menu item.
iThis function is not available for Weather
Band. The Autostore function saves receivable
stations as presets in order of their reception
quality. All stations saved manually in the preset
memory will be lost if COMAND finds 20 sta-
tions. If COMAND finds less than 20 stations, for
example 9, then the stations saved in preset po-
sitions 1 – 9 will be over written.
iIn the FM waveband, COMAND can show
the name of the station currently tuned in. Sta-
tion name display 1 can only be seen when it is
switched on and if the station transmits a name.
Page 109 of 761
108 Control systems
COMAND satellite radio* (USA only)
Selecting program category
Select “Audio” “Audio” “Sat Ra-
dio” “Category”.
The category list appears.
Select category by rotating ymz or
slidingqmr and press n.
When selecting a channel using the
channel search function or the channel
list, you have access to the channels
you subscribe to and which are includ-
ed in the selected category.
Tuning in channels
You have the following selection options:
The channel search function
The channel presets
The manual channel number entry
The channel listTuning in channels using channel
search function
Slide omp or rotate ymz when the
main area is selected.
Depending on the direction in which
the controller is being pressed or rotat-
ed, the system searches upward or
downward and stops at the next receiv-
able channel.
Tuning in channels using channel
presets
Select “Audio” “Audio” “Sat Ra-
dio” “Presets”.
or
iMain area 1 can show all channels includ-
ed in your subscription. Which channels are
shown depends on the selected program catego-
ry 4.
Note that categories and channels shown in illus-
trations are dependent on programming content
delivered by the service provider. Programming
content is subject to change.
Therefore, channel and categories shown in illus-
trations and descriptions contained in this man-
ual may differ from the channels and categories
delivered by the service provider.
iThe channels are categorized. Categories al-
low you to tune to stations broadcasting a cer-
tain type of program.
iIf only the preview channel is activated, only
certain categories are available on the list. Which
categories these are depend on the service pro-
vider.
iWhen you select the category “All Chan-
nels”, you have access to all the channels you
subscribe to, regardless of category, when you
are tuning in a channel using the channel search
function or the channel list.
iThis function is not possible when only the
preview channel is activated. If you try to tune in
a channel in this instance, you will see the
screen described in the section “Satellite radio
service is not activated” (
page 107).
iWhich channels are found by the channel
search function depends on which channels you
have subscribed to and the program category
you have selected (
page 108).
Page 110 of 761
109 Control systems
COMAND satellite radio* (USA only)
Press n when the main area is select-
ed.
The preset menu appears. The dotR
in front of a preset position indicates
that this is the channel currently select-
ed and being listened to.
Select station preset and briefly
pressn.
COMAND tunes in the corresponding
channel as long as it is included in your
subscription and is still available.
If the channel is not included in your
subscription, you will see the message
described in the section “Satellite radio
service is not activated” (
page 107).If the channel is no longer available or
only the preview channel is activated,
you will see the message “Invalid Chan-
nel”.
Closing message: Press n.
Tuning in channels using manual chan-
nel number entry
Select “Audio” “Audio” “Sat Ra-
dio” “Sat Radio” “Channel Entry”.
The menu for manual channel number
entry appears.
Exiting menu without making an
entry: Press L back button in the
center console (
page 86).
Increase or decreasing number:
Slide qmr or rotate ymz.
Selecting next number: Slideomp.
Confirming channel entry: Press n.
Further operation depends on whether
the selected channel number is valid or
if the channel is included in your sub-
scription.
Channel number is valid and channel is
included in subscription
COMAND tunes in the channel entered.
Channel number is invalid
You will see the message “Invalid Chan-
nel”.
Closing message: Press n.
Channel number is valid but channel is
not included in subscription
You will see the screen described in the
section “Satellite radio service is not acti-
vated” (
page 107).
Closing display: Press n.
iThis function is not possible when only the
preview channel is activated. If you try to tune in
a channel in this instance, you will see the
screen described in the section “Satellite radio
service is not activated” (
page 107).
Page 753 of 761
752 Index
S
S63AMG
Manual shift program mode 413
S65AMG
Manual shift program mode 413
Safety
Driving safety systems 66
Occupant 40
Reporting defects 21
Safety belts see Seat belts
Satellite radio*
Calling SIRIUS Service Center
(COMAND) 111
Channel update (COMAND) 111
Operation (COMAND) 105
Selecting channel (Instrument cluster
control system) 271
Selecting program category
(COMAND) 108
Showing program info
(COMAND) 111
Submenu overview (COMAND) 105
Tuning in channels
(COMAND) 108, 110
Voice Control* 310Seat belts 52
Children in the vehicle 57
Cleaning 594
Fastening 52, 368
Force limiter 55
Messages in display 662
Proper use of 53, 370
Safety guidelines 44
Telltale 29, 54, 605
Seating capacity 554
Seats 347
adjusting front passenger seat from
driver’s seat 350
Adjustment 347
Drive-dynamic multicontour* in the
front, Adjusting (COMAND) 262
Easy entry/exit feature 357
Folding back and placing upright rear
head restraints 354
Head restraints 353
Heating* 351
Lumbar support (COMAND) 260
Memory function 365
Multicontour* in the front, Adjusting
(COMAND) 260Operating via COMAND 259
Setting front passenger seat position
from rear 350
Ventilation* 352
Securing cargo
Cargo tie-down hooks 500
Selector lever
Lock 389
Selector lever see Gear selector lever
Self-test
OCS 51
Tele Aid 511
Service and warranty information 14
Service intervals see Maintenance service
indicator
Service life, Tires 551
Service see Maintenance
Service system see Maintenance System
Service, Parts 710
Page 758 of 761
757 Index
U
Uniform Tire Quality Grading
Standards 578
Uphill driving
Cruise control 421
Upholstery
Cleaning 595
Useful features 502
V
Valet locking 484
Vanity mirrors
In the sun visor 502
Vehicle
Batteries 692
Breaking-in period 526
Care 585
Dimensions 723
Individual settings, control system in
instrument cluster 281
Locking/unlocking 332, 335
Locking/unlocking in an
emergency 671
Lowering 690
Menu (COMAND) 242Service battery 692
Towing 700
Washing 585, 587
Weights 723
Vehicle data recording 22
Vehicle jack 669, 687
Vehicle level
Changing (ABC*) 443
Changing (Airmatic) 441
Setting (ABC*) 443
Setting (Airmatic) 441
Setting, Automatic (ABC*) 443
Setting, Automatic (Airmatic) 441
Setting, Manual (ABC*) 443
Setting, Manual (Airmatic) 441
Vehicle level control (Airmatic) 441
Vehicle loading 493, 553
Cargo tie-down hooks 500
Instructions 493
Load limit 554
Roof rack* 493
Terminology 576
Vehicle maximum load on the tire 578
Vehicle Recovery services, Stolen (Tele
Aid) 518
Vehicle tool kit 668Video (COMAND) 124
Video DVD
Menu 129
Operating (COMAND) 124
operating (Control system) 272
Pause/Play 128
Screen settings 128
Selecting scene/chapter 128
Setting language 131
Subemu overview 126
Submenu overview 126
Switching to mode 126
Video game 131
VIN 713
Voice Control*
Address book 306
Command list 315
DVD changer 313
Individualization 330
Individualization (COMAND) 237
Introduction 285
Navigation 296
Operating safety 284
Operation via the multifunction steer-
ing wheel 287
Radio 309