mirror MERCEDES-BENZ SLK CLASS 2005 Owner's Manual

258 Controls in detailUseful featuresSystem self-check
Initially, after switching on ignition, mal-
functions are detected and indicated (the
indicator lamps in the SOS button, the
Roadside Assistance button•, and the
Information button¡ stay on longer
than ten seconds or do not come on).
The message
Tele Aid malfunction
Drive to workshop
appears in the multi-
function display.Emergency calls
An emergency call is initiated automatical-
ly following an accident in which the emer-
gency tensioning devices (ETDs) or
air bags deploy.
An emergency call can also be initiated
manually by opening the cover next to the
interior rear view mirror labeled SOS, then
briefly pressing the button located under
the cover. See (
page 259) for instruc-
tions on initiating an emergency call man-
ually.
Once the emergency call is in progress, the
indicator lamp in the SOS button will begin
to flash. The message
Connecting call

appears in the multifunction display and
the audio system is muted. When the con-
nection is established, the message
Call connected
appears in the multifunc-
tion display. All information relevant to the
emergency, such as the location of the ve-
hicle (determined by the GPS satellite loca-
tion system), vehicle model, identification
number and color are generated.
!The Tele Aid system utilizes the cellular
network for communication and the
GPS (Global Positioning System) satel-
lites for vehicle location. If either of
these signals are unavailable, the
Tele Aid system may not function and if
this occurs, assistance must be sum-
moned by other means.
Warning!
G
If the indicator lamps in the SOS button, in
the Roadside Assistance button, and/or in
the Information button do not come on dur-
ing the system self-check or if any of these
indicators remain illuminated constantly in
red and/or the message
Tele Aid
malfunction Drive to workshop
is dis-
played in the multifunction display after the
system self-check, a malfunction in the sys-
tem has been detected.
If a malfunction is indicated as outlined
above, the system may not operate as ex-
pected. Have the system checked at the
nearest Mercedes-Benz Center as soon as
possible.

267 Controls in detail
Useful features
Step 3:
Hold the end of hand-held remote
control transmitter6 of the device
you wish to train approximately 2 to
5 in (5 to12 cm) away from the surface
of the integrated remote control locat-
ed on the interior rear view mirror,
keeping indicator lamp4 in view.
Step 4:

Using both hands, simultaneously
press hand-held transmitter button5
and desired integrated signal transmit-
ter button (1,2 or3). Do not re-
lease the buttons until completing
step 5.
Indicator lamp4 on the integrated re-
mote control will flash, first slowly and
then rapidly.Step 5:

When indicator lamp4 flashes
rapidly, release both buttons.
Step 6:

Press and hold the just-trained inte-
grated signal transmitter button and
observe indicator lamp4.
If indicator lamp4 stays on constant-
ly, programming is complete and your
device should activate when the inte-
grated signal transmitter button is
pressed and released.Step 7:

To program the remaining two buttons,
repeat the steps above starting with
step 3.
Rolling code programming
To train a garage door opener (or other roll-
ing code devices) with the rolling code fea-
ture, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
iThe indicator lamp4 flashes the first
time the signal transmitter button is
programmed. If this button has already
been programmed, the indicator lamp
will only start flashing after
20 seconds.
iIf the indicator lamp4 flashes rapidly
for about two seconds and then turns
to a constant light, continue with pro-
gramming steps 8 through 12 as your
garage door opener may be equipped
with the “rolling code” feature.

336 OperationVehicle carePaintwork, painted body components
Mercedes-Benz approved Paint Care
should be applied when water drops on the
paint surface do not “bead up”, normally
every three to five months, depending on
climate and washing detergent used.
Mercedes-Benz approved Paint Cleaner
should be applied if the paint surface
shows signs of embedded dirt (i.e. loss of
gloss).
Do not apply any of these products or wax
if your vehicle is parked in the sun or if the
hood is still hot.
Use the appropriate MB-Touch-Up Stick
for quick and provisional repairs of minor
paint damage (i.e. chips from stones, vehi-
cle doors, etc.).Engine cleaning
Prior to cleaning the engine compartment,
make sure to protect electrical compo-
nents and connectors from the intrusion of
water and cleaning agents.
Corrosion protection, such as
MB Anticorrosion Wax should be applied to
the engine compartment after every en-
gine cleaning. Before applying, all control
linkage bushings and joints should be lu-
bricated. The poly-V-belt and all pulleys
should be protected from any wax.Vehicle washing
Do not use hot water or wash your vehicle
in direct sunlight. Only use a mild car wash
detergent, such as Mercedes-Benz ap-
proved Car Shampoo.
Thoroughly spray the vehicle with a dif-
fused jet of water. Direct only a very weak
spray towards the ventilation intake. Use
plenty of water and rinse the sponge and
chamois frequently.
Rinse with clear water and thoroughly dry
with a chamois. Do not allow cleaning
agents to dry on the finish.
Due to the width of the vehicle, fold in ex-
terior rear view mirrors prior to running the
vehicle through an automatic car wash to
prevent damage to the mirrors.

367 Practical hints
What to do if …
.
Turn signal in
mirror, left
The left turn signal in the side mirror
is malfunctioning. This message will
only appear if a critical number of
LEDs have stopped working.

Visit an authorized Mercedes-Benz Center
as soon as possible.
Turn signal in
mirror, right
The right turn signal in the side mir-
ror is malfunctioning. This message
will only appear if a critical number
of LEDs have stopped working.

Visit an authorized Mercedes-Benz Center
as soon as possible.
Turn signal
,
front left
The left front turn signal is malfunc-
tioning.

Replace the bulb as soon as possible.
Turn signal
,
front right
The right front turn signal is mal-
functioning.

Replace the bulb as soon as possible.
Rear left turn signal
Back-up lamp on
The left rear turn signal is malfunc-
tioning. A backup bulb has been
brought into use.

Replace the bulb as soon as possible.
Rear right turn signal
Back-up lamp on
The right rear turn signal is malfunc-
tioning. A backup bulb has been
brought into use.

Replace the bulb as soon as possible.
Display symbol
Display message
Possible cause
Possible solution

382 Practical hintsReplacing bulbsNotes on bulb replacement

Only use 12-volt bulbs of the same type
and with the specified watt rating.


Switch lights off before changing a bulb
to prevent short circuits.


Always use a clean lint-free cloth when
handling bulbs.


Your hands should be dry and free of oil
and grease.


If the newly installed bulb does not
come on, visit an authorized
Mercedes-Benz Center.Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Center:


Additional turn signal lamps in the
exterior rear view mirrors


Bi-Xenon* lamps


Front fog lamps


High mounted brake lamp


Brake lamps


Front and rear side marker lamps


Parking/standing lamps in the tail
lamp assemblies
Replacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
Turn the exterior lamp switch to
positionM (
page 106).

Open the hood (
page 287) (except
for side marker lamps).
iHave the headlamp adjustment
checked regularly.

434 Technical termsLine of fall
The direct line an object moves down-
hill when influenced by the force of
gravity alone.
Locking knob
Button on the door which indicates
whether the door is locked or un-
locked. Pushing the locking knob down
on an individual door from inside locks
that door.
Maintenance System (U.S. vehicles)
Maintenance service indicator in the
multifunction display that informs the
driver when the next vehicle mainte-
nance service is due. The Maintenance
System in your vehicle tracks distance
driven and the time elapsed since your
last maintenance service, and calls for
the next maintenance service accord-
ingly.Maximum loaded vehicle weight
(
page 324)
Maximum load rating
(page 324)
Maximum tire inflation pressure
(page 324)
Memory function
Used to store three individual seat,
steering wheel and mirror positions for
each SmartKey.
MON
(Motor O
ctane N
umber)
The Motor Octane Number for gasoline
as determined by a standardized
method. It is an indication of a gaso-
line’s ability to resist undesired detona-
tion (knocking). The average of both
the MON (Motor Octane Number) and
->RON (Research Octane Number) is
posted at the pump, also known as
ANTI-KNOCK INDEX.Multifunction display
Two display fields in the instrument
cluster used to present information
provided by the control system.
Multifunction steering wheel
Steering wheel with buttons for operat-
ing the control system.
Normal occupant weight
(
page 324)
Overspeed range
Engine speeds within the red marking
of the tachometer dial. Avoid this
engine speed range, as it may result in
serious engine damage that is not
covered by the Mercedes-Benz Limited
Warranty.
Poly-V-belt drive
Drives engine components (alternator,
AC compressor, etc.) from the engine.

440 IndexAuto-dimming for rear view mirrors 168
Automatic climate control
Air conditioning 188
Air distribution 186
Air recirculation mode 186
Air volume 186
Automatic mode, basic setting 185
Control panel 185
Defrosting 189
Overview 182
REST 189
Switching off 190
Temperature 185
Automatic locking
Control system 141
When driving 97
Automatic shift program 158
Automatic transmission 152
Accelerator position 159
Automatic transmisson fluid
(ATF) 293
Comfort program mode 158
Driving 50
Emergency operation
(Limp Home Mode) 166
Fluid level 293Gear ranges 155
Gear selector lever 152
Gear selector lever
(Unlocking manually) 376
Gear selector lever position 152, 156
Gear shifting malfunctions 166
Gearshift pattern 48
Kickdown 159
Manual shifting 154
One-touch gearshifting 154
Program mode selector switch 158B
BabySmart
TM
Air bag deactivation system 75
Air bag deactivation system,
description 431
Compatible child seat 74, 75
Compatible child seats,
description 431
Passenger front air bag off indicator
lamp 75
Self-test 76
Back-up lamp 381
Bar 323
BAS 81
Description 431
Display message 351
Battery (SmartKey)
Replacing 378
Battery (Vehicle) 294, 396
Charging 397
Disconnecting 397
Jump starting 399
Removing 397
Bead 323

442 IndexCOMAND 116
Description 432
Navigation 126
Radio transmitter 281
Combination switch 110
High beam flasher 110
High beam headlamps 52, 110
Low beam headlamps 52
Turn signals 52
Turn signals, additional in
mirrors 381
Windshield wipers 53
Comfort driving
Transmission program mode 158
Compatible child seat see Baby Smart
TM
Control system 117
AUDIO menu 123
Automatic locking 141
Calling up range 146
CD player/CD changer 125
Clock, hours 134
Clock, minutes 134
Convenience submenu 142
Coolant temperature 122
Date, day 136Date, month 135
Date, year 136
Daytime running lamp mode 137
Description 432
Easy-entry/exit feature 142
Fuel consumption statistics 144
Functions 118
Instrument cluster submenu 131
Interior lighting delayed shut-off 140
Key-dependency 143
Language 132
Lighting submenu 137
Locator lighting 138
Maintenance service indicator 329
Menus 118
Messages in display 348
Multifunction display 117
Multifunction steering wheel 118
NAV menu 126
Night security illumination 139
Outside temperature/speed 132
Overview (Menus) 120
Overview (Settings submenus) 130
Parking position 144Radio station 124
Resetting all settings 128
Resetting single settings 129
Satellite radio (USA only) 124
Settings menu 127
Settings submenus 129
Speed/outside temperature 123
Speedometer, display mode 131
Standard display 122
Submenus, selecting and
scrolling 129
TEL menu 146
Temperature, display mode 131
Time and date synchronization with
head unit 133
Time/date submenu 133
Trip computer menu 144
Vehicle status message memory
menu 126
Vehicle submenu 141
Controller Area Network see CAN system
Convenience closing
Power windows 235
Retractable hardtop 242

445 Index
ESP 82
Description 432
Display message 352
On/off switch 84
Warning lamp 345
ETD 71, 72
Description 433
Safety guidelines 66
Seat belt force limiter 72
Exterior lamp switch 106
Exterior lighting
Lamps 381
Replacing bulbs 380
Exterior rear view mirrors see MirrorsF
First aid kit 369
Flat tire 388
Inflating collapsible spare tire 393
Lifting vehicle 389
Lowering vehicle 395
Mounting spare wheel 388, 391
Removing wheel 391
Floormat (Driver’s side only) 255
Fog lamps 109, 381
Cornering fog lamps 111
FSS (Canada vehicles)
Control system 329
Description 433
Fuel
Additives 425
Consumption statistics
(Control system) 144
Filler flap 284
MON 284
Premium unleaded
gasoline 284, 425
Refueling 284
Requirements 425
Reserve warning lamp 345, 346RON 284
Saving fuel 273
Technical data 422
Fuel filler flap
Localization 25, 284
Fuel gauge (Instrument cluster) 25
Fuel tank capacity 423
Fuse extractor (Vehicle tool kit) 369
Fuses 404
Auxiliary fuse box 406
Main fuse box 405
Spare fuses (Vehicle tool kit) 369

447 Index
I
Identification labels see Labels
Ignition (Position in starter switch) 35
Immobilizer see Anti-theft systems
Infant and child restraint systems 73
Information
About maintenance and warranty 10
Button for Tele Aid 261
Terminating a call (Tele Aid) 262
Instrument cluster 115
Cleaning 339
Clock 116
Description 433
Fuel gauge 25
Illumination 25, 115
Lamps, indicator and warning 342
Language in display
(Control system) 132
Outside temperature indicator
(Control system) 116
Overview 24
Reset button 25
Tachometer 115
Trip odometer 116Instruments and controls see Cockpit
Interior lighting
Delayed shut-off
(Control system) 140
Operation 113
Interior rear view mirror see Mirrors
Intermittent wiping see Windshield
wipers
Intermittent/interval wiping see
Windshield wipersJ
Jack (Vehicle tool kit) 369
Lifting vehicle 389
Lowering vehicle 395
Jump starting 399