key MERCEDES-BENZ SLK-Class 2007 R171 Comand Manual

102 Telephone*
Phone book
The following options are now available:
Switching between number and name
display
Selecting a phone book entry and es-
tablishing a connection (
page 102)
Deleting a phone book entry
(
page 103)
Switching between number and name
display
Open the phone book from COMAND
(
page 101).
Press the 123 soft key.
The phone book switches to number
display. The status bar shows the name
of the highlighted entry;
or
Press the ABC soft key.
The phone book switches to name dis-
play. The status bar shows the number
of the highlighted entry.
On the COMAND control unit
Open the phone book (page 101).
The list of phone book entries stored
on your cell phone appears.
Changing initials:
Press# or $ once or repeatedly.
Each time you press the button, the
display changes to the next letter up or
down. At the end of the list of letters is the
category
Other. This category combines
all entries without a name, or entries
whose names start with a special char-
acter (e.g.
* or #).
Selecting an entry:
If necessary, change the initial.
Select an entry using % or &.
If you press and hold either one of the
buttons, the scrolling up or down accel-
erates.
Establishing a connection:
Press2.
The telephone initiates the connection
with the selected number.
Selecting a phone book entry and es-
tablishing a connection

103 Telephone*
Phone book
On the multifunction steering wheel
Switch the multifunction display in the
instrument cluster to the Telephone
main display (
page 28).
Pressj or k repeatedly until
the desired entry is shown in the multi-
function display.
Presss .
The telephone initiates the connection
with the selected number.
Select the phone book entry to be de-
leted from COMAND (
page 102).
Press the Delete soft key.
The delete prompt is displayed.
Use# to select the menu item Yes.
Press'.
The entry is deleted.
Deleting a phone book entry

104 Telephone*
SMS (Mail)
SMS messages can be received if your ve-
hicle is equipped with a telephone and
SMS messaging is available from your car-
rier.
Received messages are saved in the folder
SMS inbox.
Open the Telephone main menu
(
page 92).
Press the SMS soft key.
The folder SMS inbox appears.The SMS inbox shows the list of received
messages. The list is sorted chronological-
ly, the last message received is displayed
at the top of the list.
The corresponding date and time appears
in the status bar when the selected mes-
sage has been received.
Use% or & to select another mes-
sage.
i
Incoming new messages are indicated
by the symbol in the status bar.
Symbol appears in the status bar if
the SMS memory is full.
In addition, a corresponding message
is displayed when the folder is opened.
SMS inbox
i
If no SMS messages have been re-
ceived the
SMS soft key is without func-
tion and therefore shaded out.

105 Telephone*
SMS (Mail)
The SMS inbox offers the following op-
tions:
Switching between subject and sender.
Reading a message (page 105).
Deleting a message (page 106).
Switching between subject and sender
The incoming SMS can be displayed by the
sender or the subject. In the SMS inbox
(
page 104) you can either see the
Subject soft key or the Sender soft key.
Press the Subject soft key.
The first characters of the message
text(s) appears;
or
Press the Sender soft key.
The name(s) or phone number(s) of the
message sender(s) appear(s).
In the SMS inbox (page 104),
use% or & to select a message.
Press'.
The message text appears.
To scroll through the message text,
press% or & as required.
Switching between subject and sender
You can either see the
Sender soft key or
the
Subject soft key.
Press the Sender soft key.
The sender’s name appears if it is
saved in the phone book. If not, only
the phone number appears;
or
i
The symbol at the beginning of a list
entry indicates that the message has
not been read.
i
The sender’s number only appears if it
has been transmitted.
The sender’s name only appears if the
number and the name are stored in the
phone book (
page 101).
Reading a message


106 Telephone*
SMS (Mail)
Press the Subject soft key.
The message text appears.
To return to the SMS inbox, press the
back soft key.
In the SMS inbox (page 104),
use% or &7to select the message
to be deleted.
Press the Delete soft key.
A delete prompt is displayed.
Use# to select the menu item Yes.
Press'.
The message is now deleted.
Press the Back soft key or1.
This returns you to the Telephone main
menu.
Deleting a message
Exiting from the SMS menu

111 Navigation*
Important notes
Continuation of the trip more than 12
hours after interruption:
Route guidance must be restarted.
Select the destination from the Last
destinations
memory (page 151),
or
Re-enter the destination
(
page 115).
Some menus provide lists from which you
can select an item.
Example: Menu to select a streetYou can select a list item using% or &.
If, as shown in the example, you can see
the
Page soft keys, then you can use the
soft keys to scroll up or down the list, page
by page.
As soon as you reach the beginning or end
of a list, the appropriate soft key is deacti-
vated.
Selection lists

112 Navigation*
Navigation main menu
Press 4.
The Navigation main menu appears if
no route guidance is active.
aa
Use% or & to select a menu item
and press ';
or
Press one of the soft keys.
The selected menu or the selected soft
key function appears.
Selectable menu items
Continue route guidance:
Continues a cancelled route guidance,
Destination memory:
Destinations can be selected from the
Destination memory (page 153),
Destination entry:
Provides access to the Destination en-
try menu (
page 115),
Last destinations:
You can select from the list of last des-
tinations (
page 151), or of such that
have been saved as current locations
(
page 130).
POIs:
(P
oints of Interest)
Provides access to POIs input
(
page 155). POIs include gas sta-
tions, airports, rest areas, hospitals,
etc.
Calling up the Navigation main menu
i
If route guidance is active, a prompt is
displayed instead, asking if route guid-
ance is to be cancelled (
page 135).
i
This menu item only appears:
if the route guidance had previously
been interrupted (
page 135), and
less than 30 minutes have expired
since the interruption,
or
if the trip was interrupted and is to
be continued 2 - 12 hours after in-
terruption (
page 110).
i
Destination memory (page 152) and
Last destinations
(page 151) can be
selected only if destinations are al-
ready stored in the system.

113 Navigation*
Navigation main menu
Selectable soft keys
Home soft key
Provides access to the input of a home
address (
page 116),
Mode soft key
Provides access to the route mode set-
ting for certain road types to be avoid-
ed (
page 113),
Setting soft key
Provides access to adjusting the
acoustics of navigation announce-
ments (treble, bass, volume and bal-
ance) (
page 113).
Certain road types to be avoided can be
defined for the system’s route calculation.
Press the Mode soft key in the Naviga-
tion main menu (
page 112).
The Setting Mode menu for road types
to be avoided appears.
Use% or & to select an option.
Press '.
This will switch the option ON or OFF.
Upon completion, press the Back soft
key.The following acoustics criteria for naviga-
tion announcements can be adjusted:
Bass/Treble/Balance
Volume (page 114)
Press the Setting soft key in the Naviga-
tion main menu (
page 112).
The Setting Mode menu appears.
Avoiding certain road typesi
Empty square = option OFF
Solid square = option ON
Several options can be activated.
Adjusting the acoustics for
navigation announcements

114 Navigation*
Navigation main menu
Setting bass, treble or balance
In the Setting Mode mode menu press
the
Bass, Treble or Balance soft key.
Press# or $.
The cursor moves horizontally, adjust-
ing bass, treble, or the balance accord-
ingly.
Press' o r t h e Back s o f t k e y , o r w a i t f o r
the screen to change.
The new setting is stored and activat-
ed.
Adjusting the volume
Automatically generated navigation an-
nouncements are superimposed over any
other active audio source. The volume dif-
ference is adjustable. This setting serves
to lower the volume of the currently active
audio source while the announcement is
being made.
In the Setting menu (page 113),
press the
Nav.Vol. soft key.
Use this menu to set the volume differ-
ence.
Press the% or & key to select the
desired setting.
Press'.
The new setting is stored.
i
The solid circle shows the current
setting.

115 Navigation*
Destination entry

Destination entry
Entering characters
For character entry, the 12 button keypad
or the keypad menu can be used.Entering a character via keypad menu
Use#, $, %, &,6 or 8 to
select a character.
Press '.
The character is entered.Entering a character via 12 button key-
pad
Use the ! - " keys to enter a char-
acter.
A key must be pressed once or several
times in quick succession:
After pressing the first time, the char-
acter display 1 appears.
1Character display
Entering data
i
For more convenient entry, COMAND
offers only available characters from
the character set based on your selec-
tions and the data stored on the navi-
gation DVD.
The character selected appears magni-
fied or black.
The system will complete the entry if
the input matches data stored on the
navigation DVD.
i
Symbol “ ” represents a space.
i
Use" to enter a space.