brake light MERCEDES-BENZ SLK320 2000 R170 User Guide

185 Malfunction and indicator lamps
Te ch n ica l
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car care Index Exterior lamp failure indicator lamp
With the key in steering lock position 2, an
indicator lamp comes on. It should go out
when the engine is running.
If the warning lamp does not go out after starting the
engine, or if it comes on while driving, this lamp
indicates a failure in the parking lamp, taillamp, stop
lamp, or low beam headlamp.
If an ex terior la mp fa il s, t he indicator la mp w ill c ome on
only when that lamp is switched on.
If a brake lamp fails, the lamp failure indicator will
come on when applying the brake and stays on until the
engine is turned off.
Note:
If additional lighting equipment is installed (e.g.
auxiliary headlamps etc.) be certain to connect into the
fuse before the failure indicator monitoring unit in
order to avoid damaging the system.Additional function indicator lamps
(in the odometer display)
FSS indicator (distance, Service A),
see page 75.
FSS indicator (distance, Service B)
see page 75.
FSS indicator (days, Service A), see page 75.
FSS indicator (days, Service B), see page 75.
Start lock-out malfunction, see page 24.
Malfunction and indicator lamp in the
center console
AIRBAG OFF indicator lamp
Passenger front airbag automatically
switched off, see page 53.
AIRBAGOFF

213 Jump starting
Te ch n ica l
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hintsCar care Index Proceed as follows:
1.Position the vehicle with the charged battery so that
the jumper cables will reach, but never let the
vehicles touch. Make sure the jumper cables do not
have loose or missing insulation.
2.On both vehicles:
•Turn off engine and all lights and accessories,
except hazard warning flashers or work lights.
•Apply parking brake and shift selector lever to
position “P” (manual transmission to Neutral).
Important!
3.Clamp one end of the first jumper cable to the
positive (+) terminal of the discharged battery and
the other end to the positive (+) terminal of the
charged battery. Make sure the cable clamps do not
touch any other metal parts.
4.Clamp one end of the second jumper cable to the
grounded negative (–) terminal of the charged
battery and the final connection to a grounded
heavy metal bracket in the engine compartment or
on the engine of the disabled vehicle.Important!
5.Start engine of the vehicle with the charged battery
and run at high idle. Make sure the cables are not
on or near pulleys, fans, or other parts that will
move when the engine is started. Allow the
discharged battery to charge for a few minutes. Start
engine of the disabled vehicle in the usual manner.
6.After the engine has started, remove jumper cables
by exactly reversing the above installation
sequence, starting with the last connection made
first. When removing each clamp, make sure that it
does not touch any other metal while the other end
is still attached.
Note:
If engine does not run after several unsuccessful
starting attempts, have it checked at the nearest
authorized Mercedes-Benz Center.
Excessive unburned fuel may damage the catalytic
converter.

265 Index
Te ch n ica l
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car careIndex
LLamps, exterior
Fog lamps ............................................................ 79, 222
Headlamps ......................................... 79, 185, 219, 237
Parking lamps ............................................ 79, 219, 221
Replacing bulbs ......................................................... 218
Side marker lamp, front .................................... 79, 223
Standing lamps ........................................... 79, 219, 221
Taillamps ............................................79, 185, 222, 237
Layout of poly-V-belt drive ............................................245
Lighter ..............................................................................115
Limp Home Mode (Automatic transmission) ............ 152
Locking and unlocking ................................................... 26
Low engine coolant level warning .............................. 183
Luggage cover ................................................................. 126MMaintenance ................................................................... 129
Malfunction and indicator lamps
in the instrument cluster ......................................... 178
Manual transmission .................................................... 143
Mirror, exterior, adjusting .............................................. 65
Mirror, exterior, rear view .............................................. 65
Mirror, inside, rear view ................................................. 64
NNight security illumination .......................................... 110OOn-board diagnostic system .........................................178
Operator’s manual ............................................................. 6
Outside temperature indicator .......................................73
Overhead control panel ................................................... 19PPanic button ......................................................................27
Parcel net in passenger footwell .................................. 116
Parking ............................................................................ 156
Parking brake ............................... 153, 155, 156, 171, 179
Power assistance ............................................................ 155
Power seats ....................................................................... 38
Power windows ...............................................................109
Express opening ........................................................109
Operate with hard top switch ..................................120
Problems with your vehicle ............................................ 12
Product information .......................................................... 5