lights NISSAN 350Z 2006 Z33 Towing Guide

2006 Nissan Towing Guide 2
TOWING
EQUIPMENT

RENTING
The first thing to keep in mind when renting a trailer is to rent only from professional
companies that specialize in towing and towing equipment. More than likely, these
representatives will have some experience in selecting and fitting the towing equipment
that is appropriate for your Nissan vehicle.
When renting, make sure you have your owner’s manual on hand so that you can check
the towing capacities for your specific vehicle. Never rent a trailer that exceeds these
capacities, and make sure that any other equipment you rent is sufficient for your loaded
trailer.
While you’re there, ask questions: How much does the trailer weigh? What is the trailer
tongue load? How much weight will the trailer hold? What type of brakes is it equipped
with? All of these items have an effect on whether your Nissan vehicle is capable of safely
pulling that trailer or piece of equipment.
Make certain that all trailer stoplights, taillights, and turn signals are hooked up and
operate correctly, and that all safety equipment is properly installed. Check the safety
chains/cables, tie-downs, etc.
Carefully inspect the condition of the trailer and equipment. Are the tires worn
excessively? Are the tire pressures correct? Are there broken welds, missing bolts or
pieces? All these factors can also affect your safety.
Towing safety should be a high priority when choosing and renting equipment, and this
is especially true concerning hitches. Never rent a clamp-on-type hitch. Since Nissan
bumpers not specifically marked for towing are not designed for trailer loads, using this
type of hitch may cause damage to your vehicle and could result in trailer separation during
towing. Tow only with a permanent-type hitch.

PURCHASING
Purchase towing items such as hitches and hitch balls only from your Nissan dealer or a
professional supplier of towing equipment.
If you are intending to use your vehicle to tow a trailer you already own, first determine
the trailer’s weight when fully loaded. This will tell you if, in fact, your vehicle is capable of
pulling this amount of weight. In addition, it will also help you purchase the right type, style,
and class* of hitch and other equipment.

*See the SPECIFICATIONS section of this guide for equipment class information specific to your
vehicle.

2006 Nissan Towing Guide 8 BREAKAWAY SWITCH
On a trailer with electric brakes, a breakaway switch can automatically activate the trailer
brake system if the trailer becomes separated from the tow vehicle. Should the trailer
become detached, a breakaway switch may help prevent the trailer from wandering into
another lane and will bring it to a safer stop with less damage.
A breakaway switch relies on the power of a trailer battery, so make sure it is not
discharged. Never use the breakaway switch to “park” the trailer on a grade. The battery
would eventually discharge and release the brake, allowing the trailer to roll.
Be sure to leave enough slack in the tether on the breakaway switch to turn corners
without binding. If not, the electric trailer brakes will lock-up and not release.
See your trailer manufacturer for proper installation of a breakaway switch that is
compatible with your trailer braking system.

TRAILER LIGHTS
Trailer lights should comply with all applicable federal, state, and local regulations, and
should be in proper working order at all times. A trailer’s taillights, stoplights, and turn
signals must be wired* into the tow vehicle’s electrical system. Many trailers use the same
filament of a dual-filament bulb for both stoplights and turn signals. The second filament is
used for the trailer’s taillights. All Nissan vehicles utilize separate filaments for each
function. Direct splicing of this type of trailer lighting may cause damage to your vehicle’s
electrical system and malfunction of the trailer lighting. When connecting your Nissan
vehicle to this type of trailer lighting system, a 3-wire to 2-wire power converter** must be
used. A power converter of this type creates only minimal additional demand (draw) on the
vehicle lighting circuits to power the trailer lighting.
Always check for correct operation of the turn signals, stoplights, and taillights every
time you connect a trailer for towing. Never replace vehicle fuses with fuses of a higher
amperage rating than the original.
NOTE – Improper or poor quality trailer harness wiring may affect your vehicle’s electrical
system. Use only a Nissan approved wiring harness, or consult your dealer or a
professional supplier of towing equipment for compatible equipment.



*See the SPECIFICATIONS section of this guide for wiring harness information specific to your
vehicle.
**Armada, Frontier, Pathfinder, Titan, and Xterra vehicles are pre-wired for trailer lighting and do not

require a converter.

2006 Nissan Towing Guide 16 VEHICLE SPEED
Some states have specific regulations and speed limits for vehicles that are towing trailers.
Always obey these ordinances. Remember to reduce your speed in unsafe or less-than-
ideal road conditions or weather. When towing a trailer, braking distances increase while
handling agility decreases. Always leave yourself an extra margin of distance to respond to
emergency situations.

PASSENGERS
Never allow passengers to ride inside a trailer while it is being towed. Not only is this
unlawful in most areas, passengers could be seriously injured during sudden trailer
movement or in an accident. In addition, trailers may allow fumes from the tow vehicle to
leak inside. This could result in carbon monoxide poisoning from the engine exhaust.

VEHICLE MODIFICATIONS
Vehicle modifications — beyond those required for proper hitch installation, wiring hook-up,
and necessary cooling system upgrading — are not recommended for any Nissan vehicle
being used for towing purposes. Changes to the drivetrain, suspension, exhaust systems,
frame structure/unibody, or other vehicle components are not necessary for towing within
the limits described in this guide. These changes may diminish the reliability and longevity
of your vehicle and possibly void warranty coverage as well.

TOOL KIT
It is always a good idea to travel with a special tool kit when towing. In addition to tools, it
should contain flares, a flashlight, emergency reflectors, jumper cables, extra fuses, extra
radiator coolant, oil, and easily replaced spare parts such as taillight bulbs. You should also
carry spare tires for your tow vehicle and trailer, as well as a jack suitable for use on the
trailer. Be aware that not all automotive jacks can be used safely on a trailer.

BEFORE STARTING OUT
Before starting out on a trip, make one last inspection of the tow vehicle and the trailer. Are
the tire pressures correct? Are the safety chains/cables securely in place? Is the cargo tied
down securely? Do all the lights work? Is the coupler properly attached over the hitch ball
and secured using a locking pin? Is the breakaway switch hooked up and functioning
properly? Are vehicle and electric trailer brakes working properly?
Make a checklist of key items to be inspected, and don’t forget the basics. When
towing, vehicle engine oil, transmission oil, and coolant should always be checked before
starting out. Finding a potential problem while in your driveway is better than discovering it
miles from home.